PREV 17th July, 2019 NEXT

New RF & Microwave Products this Week

17 July, 2019 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
Date: 17 July, 2019
 
Sponsored by Coilcraft
 
 
 
New RF & Microwave Products this Week
RF Test Set
Customizable All-in-One RF Test System up to 20 GHz

RF Test Set  from Elite RF

The S-Series Pro from Elite RF is an All-in-One RF Test System that operates up to 20 GHz. The test system can be customized to contain a range of test equipment including a Real-Time Spectrum Analyzer, Vector Network Analyzer, Signal Generator, RF Power Meter and other devices.
Download Datasheet | Product Details
Vector Network Analyzer
24-Port Vector Network Analyzer from 9 kHz to 40 GHz

Vector Network Analyzer  from Rohde & Schwarz

The ZNBT40 from Rohde & Schwarz is a Multi-port vector network analyzer that operates from 9 kHz to 40 GHz offering up to 24 ports. The instrument can simultaneously test multiple DUTs or measure one DUT with up to 24 ports. It provides short measurement times of 3.5 ms for a sweep across 201 points.
Download Datasheet | Product Details
Front End Module
Dual Path RF Switch + LNA FEM from 3.4 to 3.8 GHz

Front End Module  from Integrated Device Technology

The F0453B from IDT is an integrated dual-path RF front-end module that operates from 3.4 to 3.8 GHz. It consists of an RF switch and two low noise amplifier (LNA) stages in each path. This FEM can be used in the analog front-end receiver of an Active Antenna System (AAS).
Download Datasheet | Product Details
RF Variable Attenuator
5-Bit Digital Attenuator from DC to 30 GHz

RF Variable Attenuator  from Custom MMIC

The CMD280 is a wideband 5-bit digital attenuator that operates from DC to 30 GHz (L, S, C, X, Ku, K, Ka Band). Each bit of this GaAs MMIC attenuator is controlled by a single voltage of either 0 V or -5 V. The attenuator bit values are 0.5 (LSB), 1, 2, 4, and 8 dB, for a total attenuation of 15.5 dB with an attenuation accuracy of 0.1 dB.
Download Datasheet | Product Details
RF Amplifier
5 W GaN Power Amplifier Module from 0.05 to 10 GHz

RF Amplifier  from AMCOM Communications

The AM00010037MD-1H from AMCOM is a broadband GaN power amplifier module that operates from 0.05 to 10 GHz with TTL control. It provides 5 watts (37 dBm) of saturated output power, a small signal gain of 12 dB, and a noise figure of 7 dB. This amplifier has an I/O return loss of 10 dB and requires a supply voltage of 32 volts.
Download Datasheet | Product Details
RF Amplifier
L & S-Band Bi-directional Amplifier from 1 to 2.5 GHz

RF Amplifier  from NuWaves Engineering

The NW-BA-12C04A from NuWaves Engineering is a bi-directional amplifier that operates from 1 to 2.5 GHz covering the L & S Bands. It provides 15 watts of output power at the Tx port (5% EVM at 34 dBm) and a gain of 13 dB at the Rx port. This compact and light weight bi-directional amplifier is ideal for extending the communication range of half duplex L or S-band transceivers with constant-envelope waveforms or near-constant-envelope waveforms.
Download Datasheet | Product Details
Sponsored by Coilcraft
Coilcraft 0805HP Series
New Chip Inductors Offer the Highest Q Available in an 0805 Package
Coilcraft 0805HP Series ceramic chip inductors offer the industry’s highest Q factors in an 0805 size at frequencies up to 3 GHz. Choose from 23 inductance values ranging from 2.6 to 820 nH, with 2% tolerance available for most values. Click here for Free samples!
 
RF Amplifier
150 W Solid State Amplifier from 10 kHz to 1000 MHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 150/150AW1000 from AR RF/Microwave Instrumentation is a solid-state, self-contained, air-cooled CW Amplifier that operates from 10 kHz to 1000 MHz. This broadband amplifier is ideal for applications where instantaneous bandwidth, high gain and linearity are required. It provides over of 150 watts of RF power with a gain of more than 52 dB.
Download Datasheet | Product Details
RF Amplifier
100 W Solid State Pulsed Power Amplifier from 9 to 10 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP3010P from Exodus Advanced Communications is a solid state pulsed power amplifier that operates from 9 to 10 GHz. This amplifier has been developed for X-band pulse applications and delivers a peak output power of over 100 watts with a 20% duty cycle and a pulse width of 100 µsec. It provides a gain of more than 50 dB with 2 dB flatness across the frequency band.
Download Datasheet | Product Details
Antenna
Multi-Beam, Phase Array Antenna from 5.2 to 5.875 GHz

Antenna  from ET Industries

The 6ET2P56 from ET Industries is a Multi-Beam Antenna that operates from 5.2 to 5.875 GHz. This phase array antenna incorporates beam forming and beam shaping technology that produce six beams, each with a 90 deg beamwidth.
Download Datasheet | Product Details
RF Switch
High-Power SP4T Switch from 0.7 to 3.8 GHz

RF Switch  from Skyworks Solutions

The SKY13597-684LF from Skyworks is a SP4T RF Switch that operates from 0.7 to 3.8 GHz. It can handle up to 40 dBm of power, has a low insertion loss and high isolation of 23 dB at 2.7 GHz. Switching is controlled by two CMOS/TTL compatible control voltage inputs. The SKY13597-684LF is available in a small size, 10-pin, 1.1 x 1.5 x 0.5 mm QFN package and is ideal for cellular systems, 2G/3G/4G LTE systems, pre-PA and post-PA switching applications.
Download Datasheet | Product Details
RF Switch
SPDT Antenna Diversity Switch from 0.05 to 6 GHz

RF Switch  from Infineon Technologies

The BGS12WN6 from Infineon is a Wideband, Antenna Diversity SPDT switch that operates from 0.05 to 6 GHz with CMOS/ TTL control logic. It has an insertion loss of less than 0.16 dB, provides isolation of over 35 dB and can handle up to 26 dBm of input power where any of its two ports can be used for the termination of the diversity antenna.
Download Datasheet | Product Details
RF Variable Attenuator
Solid State USB Programmable Attenuator from 0.1 to 18 GHz

RF Variable Attenuator  from JFW Industries

The 50P-2068 from JFW Industries is a solid-state programmable attenuator that operates from 0.1 to 18 GHz. It has an attenuation range of 0 to 31 dB with 1 dB steps. The attenuator has a fast switching speed of 1 microsecond and can handle an input power of up to 20 dBm. It is available in a module with SMA female connectors and has a USB port for power/control.
Download Datasheet | Product Details
Sponsored by Coilcraft
 
 
 
Frequency Synthesizer
8 to 20 GHz Low Phase Noise Benchtop Frequency Synthesizer

Frequency Synthesizer  from Micro Lambda Wireless, Inc.

The 8020 Micro Lambda Wireless is a low phase noise benchtop frequency synthesizer that operates from 8 to 20 GHz with a step size of 10 Hz. The synthesizer has a phase noise of up to -80 dBc/Hz @ 10 kHz offset. It provides a minimum output power of 10 dBm and has switching speed of up to 7 ms.
Download Datasheet | Product Details
Power Divider
3-Way Power Divider from 138 to 960 MHz

Power Divider  from RF Industries

The RFPSW-3PS-NF from RF Industries is a 3-way Wilkinson power splitter that operates from 138 to 960 MHz. It has an insertion loss of less than 1.6 dB, a split loss of 4.8 dB and can handle an input power of up to 50 watts. The splitter has a VSWR of 1.30:1. It is available in a module with N-type female connectors and has been designed specifically for public safety DAS applications.
Download Datasheet | Product Details
Power Divider
4-Way Power Divider from 2.4 to 6 GHz

Power Divider  from Amtery

The PDV40206B from Amtery is a 4-way power divider that operates from 2.4 to 6 GHz. It has an insertion loss of less than 1.6 dB, isolation of over 19 dB and can handle an input power of more than 10 watts. The divider has a typical I/O VSWR of 1.20:1, an amplitude balance of 0.2 dB, and a phase balance of 2 degrees. It is available in a module with SMA (F) connectors.
Download Datasheet | Product Details
Directional Coupler
20 dB Directional Coupler from 2 to 40 GHz

Directional Coupler  from VidaRF

The VDC-20400A20 from VidaRF is a directional coupler that operates from 2 to 40 GHz. The coupler has a coupling value of 20 dB with directivity of over 12 dB and an insertion loss of less than 1.6 dB. It can handle up to 20 watts of input power and is available in a module with 2.92 mm female connectors.
Download Datasheet | Product Details
Band Pass Filter
40 to 46 GHz Combline Band Pass Filter

Band Pass Filter  from Electro-Photonics LLC

The FBP-CML-4300-24FF from Electro-Photonics is a Combline Band Pass Filter with a passband from 40 to 46 GHz. The filter has an insertion loss of under 1.7 dB and more than 45 dB of rejection above and below the passband. It can handle up to 5 watts of power and is available in a module with 2.4 mm female connectors.
Download Datasheet | Product Details
RF Switch
SPDT Switch from 10 MHz to 40 GHz

RF Switch  from Sigatek

The PWW2R-51 from Sigatek is a Pin diode SPDT reflective switch that operates from 10 MHz to 40 GHz. It has an insertion loss of less than 5 dB and an isolation of more than 35 dB. The switch has a switching time of 70 ns and can handle up to 23 dBm of input power. It requires -5 to +5 V of supply voltage with TTL control and is available in a module with 2.92 mm (F) connectors.
Download Datasheet | Product Details
Voltage Controlled Oscillator
Voltage Controlled Oscillator from 4187 to 4188 MHz

Voltage Controlled Oscillator  from Z-COMM

The CRO4187E-LF from Z-communications is a Voltage Controlled Oscillator which can be tuned to a frequency from 4187 to 4188 MHz. The VCO provides a spectrally clean signal with a phase noise as low as -108 dBc/Hz at 10 kHz offset (1 Hz BW). It has a tuning voltage from 0.5 to 4.5 V and requires a supply voltage of 8 V to operate.
Download Datasheet | Product Details
RFID Reader
UHF RAIN RFID Reader for Vehicle Access Control Applications

RFID Reader  from Feig Electronic

The ID LRU500i from Feig Electronic is a UHF RAIN RFID Long Range Reader with an integrated antenna for vehicle access control applications. Operating from 865 to 868 MHz (EU variant) / 902 to 928 MHz (FCC variant), it provides an output power of up to 1 watt.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, upcoming events, articles, white papers and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]