1. everything RF
  2. RF Newsletters
more
PREV 29th July, 2019 NEXT

Latest News & White Papers this Week

29 July, 2019 - everything RF Newsletter

RF & Microwave industry updates.

 
Date: 29 July, 2019
 
Featured Event
 
 
 
Latest News this Week
More 5G Spectrum Required to Support the Increase in Mobile Data Traffic
World's First Filters Designed to Supress Noise in the 5GHz Wi-Fi Band - Murata
Keysight Now Supports 5G RF Conformance Test Cases for mm-Wave (FR2) Spectrum - Keysight Technologies
Skyworks Expands its 5G Wireless Infrastructure Portfolio - Skyworks Solutions
Apple to Acquire Intel’s Smartphone Modem Business for $1 Billion - Apple
Qualcomm Opens New Lab for End-to-End Over-the-Air 5G mmWave Testing in Europe - Qualcomm
Amkor Brings its Cutting Edge Antenna-in-Package Technology to 5G mm-Wave Devices - Amkor
SiTime Unveils Ruggedized MEMS Timing Solutions for Aerospace & Defense - SiTime
Nextivity Introduces Cost-Effective RF Site Surveying and Installation Tool - Nextivity
Industry’s First RF Conformance System for 5G NR mm-Wave Testing - Anritsu
3D Smith Chart Tool Now Available with More Features - 3D Smith Chart
Orbital Micro & Georgia Tech Develop SiGe Based MMIC for Radiometry Instruments - OMS
More News
New White Papers & Articles
Antenna Impedance Matching - An Introduction - Abracon LLC
LoRaWAN and NB-IoT: Competitors or Complementary? - ABI Research
Exploring 5G Fronthaul Network Architecture Intelligence Splits and Connectivity - Intel
Using Modeling and Simulation to Assess Challenges and Solutions for 5G Fixed Wireless Access - Remcom
Over-The-Air Testing of Receive Diversity and MIMO Capable Terminals - Microwave Vision Group
More White Papers
Upcoming Event
Event Image
V2X Americas 2019
Date: 10 & 11 September, 2019
Location: Santa Clara Convention Center, California
More Events
Featured Content
RF Community
To Cancel or to Synchronize – That’s the 5G Question
The frequency spectrum has been divided by the regulators into bands. Each band, in turn, is divided into channels. In general, radios are designed to operate in any channel within a particular band. In many parts of the world, the 3.5 GHz band has been allocated to future 5G networks. Click here to learn More
 
Featured Products this Week
RF Amplifier
GaN Solid-State Narrowband Power Amplifier from 8.5 to 9.8 GHz

RF Amplifier  from CTT Inc

The AGN/098-5864-P from CTT is a GaN Solid-State Narrowband Power Amplifier (Pulsed) which operates from 8.5 to 9.8 GHz. They provide an output power of 600 watts with a gain of over 64 dB and noise figure of 7 dB. The amplifier requires a 50 V supply voltage and draws a current of 58 A. It is available in a compact hermetically sealed package which has SMA Connectors and can operate up to 60 Degree C.
Download Datasheet | Product Details
GNSS Module
Multi-Channel GPS Module with Integrated Antenna

GNSS Module  from OriginGPS

The ORG1410 from OriginGPS is an ultra-low profile and ultra-low weight multi-channel GPS module with integrated antenna. It also supports SBAS, QZSS and other regional overlay systems to continuously track all satellites in view, providing real-time positioning data in standard NMEA format.
Download Datasheet | Product Details
SATCOM Antenna
Ku-Ka Band Convertible Maritime VSAT Antenna System

SATCOM Antenna  from Intellian

The v85NX from Intellian is an 85 cm Ku-Ka Convertible Maritime VSAT Antenna System that supports full 2.5 GHz wide Ka-band networks and is ready for future NGSO (non-geostationary satellite orbit) constellations. The antenna provides a transmit gain of 40.7 dBi @ 14.25 GHz and a receive gain of 38.9 dBi @ 11.7 GHz.
Download Datasheet | Product Details
Signal Generator
High Performance, Affordable Vector Signal Generators

Signal Generator  from SRS

The SG390 Series is a range of high performance, affordable vector signal generators that operate from DC to 6.075 GHz (available in 2 GHz, 4 GHz and 6 GHz models). The generators support both analog and vector modulation.They offer wide variety of analog modulation capabilities including amplitude modulation (AM), frequency modulation (FM), phase modulation, and pulse modulation.
Download Datasheet | Product Details
RF Spectrum Analyzer
Low Cost, Software-Upgradeable Spectrum Analyzer from 5 kHz to 3 GHz

RF Spectrum Analyzer  from Rohde & Schwarz

The FPC1000 from Rohde & Schwarz is a software-upgradeable spectrum analyzer that operates from 5 kHz to 1 GHz, which can be expanded to 2 GHz or 3 GHz via software upgrades (keycode upgrade concept). The device provides a low noise floor level of -150 dBm, which can be further extended to -165 dBm with an optional, keycode-activated preamplifier.
Download Datasheet | Product Details
PLDRO
Dual Loop Phase-Locked DRO from 7 to 18 GHz

PLDRO  from AMG Microwave

The AMG026-001 from AMG Microwave is a Dual Loop Phase Locked DRO that operates from 7 to 18 GHz. It provides an output power of up to 10 dBm requires a 15 V supply voltage. The device has a phase noise of -90 dBc/Hz @ 10 kHz offset at 10 GHz. The PLDRO is available in a module that measures 61 x 89 x 15.7 mm with SMA female connectors.
Download Datasheet | Product Details
RFID Reader IC
HF Reader / NFC Initiator IC for Payment Applications with 1 W Output Power

RFID Reader IC  from STMicroelectronics

The ST25R3913 is a highly integrated NFC Initiator / HF Reader IC. This IC is ideal for payment applications with up to 1 W of output power. The presence of a card can be detected by performing a measurement of amplitude or phase of the signal on the antenna LC tank and comparing it to the stored reference.
Download Datasheet | Product Details
Base Station Antenna
698 to 960 MHz / 1710 to 2690 MHz Multi Port Base Station Antenna

Base Station Antenna  from GAMMA NU, INC

The EOO16X65V12D6 from GAMMA NU is a Multi band, Multi port Base Station Antenna that operates from 698 to 960 MHz / 1710 to 2690 MHz. It provides a gain from 15.3 - 17.9 dBi and can handle up to 250 watts of effective power per port. The antenna measuring 2000 x 350 x 160 mm is available with 6 x 7-16 DIN female or 4.3-10 DIN female connectors.
Download Datasheet | Product Details
RF Module
Secure Low-Power Wireless IPv6 Module for IoT Applications

RF Module  from Integrated Device Technology

The ZWIR4532 is a programmable low-power secure IPv6 communication module for internet of things (IoT) device networks. This FCC certified module serves as a universal secure radio communication module for applications with low bandwidth requirements. It incorporates an Arm microcontroller, a Sub-GHz radio transceiver, and optional license-free IDT firmware download.
Download Datasheet | Product Details
Waveguide Attenuator
Waveguide Attenuators from 1.12 to 40 GHz

Waveguide Attenuator  from L-3 Narda-ATM

This series of rectangular waveguide fixed attenuators from  L-3 Narda-ATM operates from 1.12 to 40 GHz covering waveguide sizes WR-28 through WR-650. The attenuators have a fixed attenuation level of 3, 6, 10, 20 and 30 dB. They have a VSWR of above 1.15:1 and can handle up to 11 watts of power. The waveguide attenuators are available with multiple flange options with a length from 3 to 25 inches.
Download Datasheet | Product Details
Voltage Controlled SAW Oscillator
Voltage Controlled SAW Oscillator from 5 to 7 GHz

Voltage Controlled SAW Oscillator  from Vectron International

The VS-403 from Vectron International is a Voltage Controlled SAW Oscillator (VCSO) that can be tuned to a frequency from 5 to 7 GHz with a tuning voltage from 0 to 3.3 V. It provides a 14 fs rms jitter in the 12 kHz to 20 MHz integration bandwidth and has a low phase noise. The VCSO requires a 3.3 V supply and provides a sinewave output.
Download Datasheet | Product Details
RF Relay
Hi-Rel Electro-Mechanical Relay Switch from DC to 26.5 GHz

RF Relay  from Fairview Microwave

The FMSW6383 is a SP6T electromechanical relay switch that operates from DC to 26.5 GHz. It has an insertion loss of less than 0.15 dB, isolation of greater than 80 dB and can handle up to 90 Watts of CW input power in a break before make condition. The design has a normally open actuator and is rated for 2M life cycles for high reliability operation.
Download Datasheet | Product Details
RF & Microwave Isolator
Dual Junction Isolator from 1.3 to 2.8 GHz

RF & Microwave Isolator  from MCLI

The ISDJ-12/ NF from MCLI is a dual junction isolator that operates from 1.3 to 2.8 GHz. It has an insertion loss of less than 1.2 dB and provides an isolation of more than 34 dB. The isolator can handle 50 watts of forward input power and has a VSWR of 1.35:1. It is available in a module with N Type connectors.
Download Datasheet | Product Details
RF Amplifier
240 W Dual Band Power Amplifier from 0.8 to 6 GHz

RF Amplifier  from MILMEGA

The AS0860A-200/50 from MILMEGA is a solid state dual-band power amplifier that operates from 0.8 to 2.7 GHz and 1.8 to 6 GHz. It provides more than 240 watts of saturated output power and a gain of over 49 dB with a noise figure of less than 8 dB. This amplifier requires a 90 to 132 V power supply and can handle up to 15 dBm of input power.
Download Datasheet | Product Details
Delay Line
Dual-Channel Programmable Delay Line from DC to 18 GHz

Delay Line  from Colby Instruments

The PDL-200A-625PS from Colby Instruments are a series of dual-channel programmable delay line that operates from DC to 18 GHz. These delay lines provide a delay from 0 to 625 ps on both channels with a resolution of 0.50 picoseconds (ps). This delay line can handle up to 10 watts of power and is available as a module with SMA Connectors.
Download Datasheet | Product Details
Featured Event
 
 
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, white papers, articles and much more.