1. everything RF
  2. RF Newsletters
more
PREV 7th Aug, 2019 NEXT

New RF & Microwave Products this Week

7 Aug, 2019 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
Date: 7 Aug, 2019
 
RF Filters Design Tool
 
 
 
New RF and Microwave Products this Week
Signal Generator
9 kHz to 3/6 GHz Vector Signal Generator for IoT Applications

Signal Generator  from Keysight Technologies

The N5166B CXG from Keysight is an RF Vector Signal Generator that operates from 9 kHz to 3/6 GHz with up to 120 MHz of RF modulation bandwidth covering most consumer wireless application testing requirements. It provides an output power of 18 dBm and has a phase noise of -119 dBc/Hz (20 kHz offset) at 1 GHz.
Download Datasheet | Product Details
Signal Generator
24 to 40 GHz Handheld Signal Generator

Signal Generator  from SAF Tehnika

The J0SSAG14 from SAF Tehnika is a Handheld Signal Generator that operates from 24 to 40 GHz. It has an output power range of -3 to 5 dBm. This generator is ideal for carrying out different microwave system analysis and measurement applications like LOS Verification, Antenna alignment, etc. It has a touch screen intuitive interface that can be used even when wearing gloves.
Download Datasheet | Product Details
RF Switch
0.4 to 2.7 GHz SP6T LTE Transmit/Receive Switch

RF Switch  from Skyworks Solutions

The SKY13525-646LF from Skyworks is an SP6T antenna switch with a Mobile Industry Processor Interface (MIPI) controller. Operating from 0.4 to 2.7 GHz, it maintains a low insertion loss and high isolation, which makes it an ideal choice for UMTS, CDMA2000, EDGE, and LTE applications.
Download Datasheet | Product Details
RF Variable Attenuator
80 dB Variable Attenuator from DC to 2.55 GHz

RF Variable Attenuator  from JFW Industries

The 50R-137 from JFW Industries is a variable attenuator that operates from DC to 2.55 GHz. It has an attenuation range from 0 to 80 dB with 10 dB steps. The attenuation level can be controlled manually using a single knob. This attenuator has an insertion loss of less than 1 dB and can handle up to 2 W of average input power and a peak power of up to 1 kW. It is available in a module with N/ SMA/ TNC (F) connectors.
Download Datasheet | Product Details
Band Stop Filter
Waveguide Band Stop Filter from 5850 to 5925 MHz

Band Stop Filter  from Anatech Electronics

The AE5887WN2284 from Anatech is a waveguide bandstop filter with a stopband from 5850 to 5925 MHz. In the stop band, the filter has an attenuation of over 50 dB and has an insertion loss of 2.5 dB in the passband. It can handle an input power of up to 30 W. The filter is available in a module that measures 141 x 25 x 16 mm with SMA (F) connectors.
Download Datasheet | Product Details
RF & Microwave Isolator
Drop-in Isolators from 10 MHz to 26.5 GHz

RF & Microwave Isolator  from UIY Inc.

The drop-in Isolators from UIY operate from 10 MHz to 26.5 GHz. They have an insertion loss of less than 1.5 dB, isolation of over 14 dB, and can handle up to 500 watts of forward power. These isolators are available in a module with TAB connectors as standard products and can also be ordered as a custom module. They are suitable for Military, Space & Commercial applications.
Download Datasheet | Product Details
Front End Module
2.4 GHz Wi-Fi 6 Integrated Front End Module (iFEM)

Front End Module  from Qorvo

The QPF7219 is an integrated front end module (iFEM) designed for Wi-Fi 6 (802.11ax) systems. It integrates a 2.4 GHz power amplifier (PA) with power detector, FCC bandedge BAW filter, regulator, transmit-receive switch (SPDT) and bypassable low noise amplifier (LNA) into a single device.
Download Datasheet | Product Details
RF Amplifier
125 W Amplifier from 0.7 to 6 GHz for EMC Test Applications

RF Amplifier  from AR RF/Microwave Instrumentation

The 125S1G6 from AR RF/Microwave Instrumentation is a solid-state, Class A, self-contained, air-cooled, broadband amplifier that operates from 0.7 to 6 GHz. It is designed for applications where instantaneous bandwidth, high gain, and linearity are required. This broadband amplifier provides 125 W of output power with a gain of 52 dB when used with a sweep generator.
Download Datasheet | Product Details
RF Amplifier
C-Band Solid State Bidirectional Amplifier from 4.4 to 5.1 GHz

RF Amplifier  from NuWaves Engineering

The NW-BA-C-10-RX03 from NuWaves is a C-Band Solid State Bidirectional Amplifier module that operates from 4.4 to 5.1 GHz. The BDA has an auto-sense transmit/receive (T/R) control, with an extremely fast T/R mode switch time of under 2 uS. In Tx mode, it provides an output power of up to 10 watts with a gain of 12 dB and power efficiency of 20%. In Rx mode, it provides a gain of 10 dB with a noise figure of 3 dB.
Download Datasheet | Product Details
Balun
729 to 960 MHz Surface Mount Balun

Balun  from Johanson Technology

The 0845BL05A0100 is a 1:2 impedance ratio balun (Unbalanced to Balanced Transformer) that operates from 729 to 960 MHz. It has an unbalanced port impedance of 50 ohms and a balanced port impedance of 100 ohms. The balun has an insertion loss of under 0.85 dB, return loss of over 9.5 dB and can handle an input power of up to 2 watts.
Download Datasheet | Product Details
Block Up Converter
150 W Linear X-Band SSPA Block Upconverter

Block Up Converter  from Comtech Xicom Technology

The XTSLIN-150X-B1 from Xicomtech is a Solid State Block Up Converter that operates in the X-band with an input frequency from 950 MHz to 1450 MHz and an RF frequency from 7.9 to 8.4 GHz. It provides a linear output power of over 150 watts and a factory configurable small-signal gain of 65 to 75 dB while consuming only 875 VA of power.
Download Datasheet | Product Details
Diplexer
14.4 to 14.83 GHz / 15.15 to 15.35 GHz Ku-Band Diplexer

Diplexer  from MtronPTI

The UFDX9999 from MtronPTI is a Ku-band diplexer with Passband 1 from 14.4 to 14.83 GHz and Passband 2 from 15.15 to 15.35 GHz. It has an insertion loss of under 1 dB, isolation of more than 80 dB, and return loss of over 15 dB. The Diplexer can handle up to 50 watts of power. It is available in a module that measures 2.4 x 2.485 x 0.71 inches with SMA connectors and is ideal for Satcom and electronic warfare applications.
Download Datasheet | Product Details
RF Filters Design Tool
 
 
 
Signal Generator
Microwave Signal Generator from 0.05 to 30 GHz

Signal Generator  from DS Instruments

The SG30000 is an ultra-wideband microwave signal generator that operates from 0.05 to 30 GHz. It can generate signals with power levels from -60 to 10 dBm that have very low phase noise. This RF generator is fully programmable via SCPI commands, or the front panel interface. It has an Ethernet port for remote control and an integrated RMS power meter.
Download Datasheet | Product Details
RF Amplifier
47 dBm GaN Power Amplifier from 2 to 6 GHz

RF Amplifier  from Linwave

The LW10-793605 from Linwave Technology is a solid-state GaN amplifier that operates from 2 to 6 GHz. This Class AB broadband amplifier provides a CW output power of 47 dBm with a small signal gain of 59 dB and a noise figure of less than 15 dB. It consumes less than 15 watts of input power and requires 28 volts of power supply.
Download Datasheet | Product Details
RFID Tag
UHF Gen2 Printable Mount on Metal Tag

RFID Tag  from GAO RFID

The 116083 is a UHF Gen2 printable RFID tag that can be mounted on metal surfaces. It uses Alien Higgs 3 chip optimized for use at 915 MHz. This is a surface-independent tag that uses a patented inlay design and passive RFID technology to obtain excellent read ranges regardless of the surface metal, plastic, even wood.
Download Datasheet | Product Details
RF Transistor
11 to 12 GHz GaN on SiC Transistor for X-Band Radars

RF Transistor  from Integra Technologies, Inc.

The IGT1112M90 from Integra is an X-Band Radar Transistor that operates from 10.8 to 11.8 GHz. This GaN-on-SiC RF power transistor supplies more than 90 watts of peak output power under 150µs, 10% duty cycle pulse conditions, with an associated 9 dB of gain and 35% efficiency. It operates from a 50 V supply voltage. The transistor is housed in a metal-based package with epoxy sealed ceramic lid and is best suited for X-band radar applications.
Download Datasheet | Product Details
RF Transistor
LDMOS Transistor from 2700 to 3100 MHz for Radar Applications

RF Transistor  from Ampleon

The BLS9G2731L-400 is an LDMOS power transistor that operates from 2700 to 3100 MHz. It delivers an output power of 400 watts with a gain of 13 dB and has a drain efficiency of 47%. The transistor is available in a flanged ceramic package with integrated dual-sided ESD protection and is compliant to Directive 2002/95/EC, regarding Restriction of Hazardous Substances (RoHS). It is ideal for S-band radar applications.
Download Datasheet | Product Details
RF Amplifier
LO Buffer Amplifier from 20 to 55 GHz

RF Amplifier  from Marki Microwave

The AMM-6702 from Marki Microwave is broadband MMIC LO buffer amplifier that operates from 20 to 55 GHz. It is designed to provide a strong, flat output power response when driven with an input power at 0 dBm. The amplifier provides a saturated output power of 22 dBm and a gain of 28 dB with a noise figure of 6 dB. It is available as a bare die or a connectorized module.
Download Datasheet | Product Details
Diplexer
80-2690 MHz and 3300-5925 MHz Diplexer with No DC Pass

Diplexer  from Radio Frequency Systems

The FDFX55020S4-NC from RFS is a Diplexer with a low passband from 80 to 2690 MHz and a high passband from 3300 to 5925 MHz (CBRS/LAA). It has an insertion loss of under 0.5 dB, an attenuation of 50 dB, and a return loss of over 16 dB. The Diplexer can handle up to 160 watts of power and is available in a module that measures 96 x 79 x 30 mm with 4.3-10 connectors.
Download Datasheet | Product Details
Power Divider
2-Way Wideband Power Divider from 2 to 19 GHz

Power Divider  from ENGIN-IC

The ENGPD00014 from ENGIN-IC is a 2-way wideband power divider that operates from 2 to 19 GHz. It has an insertion loss of less than 2.5 dB, isolation of more than 12 dB, and a return loss of over 20 dB. This power divider can handle an input power of up to 27 dBm and has an amplitude balance of 0.1 dB and a phase balance of 1 degree.
Download Datasheet | Product Details
Antenna
Helical GNSS Antenna for UAV Applications

Antenna  from Tallysman Wireless

The HC871 is a lightweight helical antenna covering the GPS L1/L2, GLONASS G1/G2, Galileo E1, and BeiDou B1 frequency bands, designed and crafted for precision positioning. It has a precision-tuned helix element that provides excellent axial ratios and operates without the requirement of a ground plane, making it ideal for a variety of high-precision Unmanned Aerial Vehicle (UAV) applications.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, upcoming events, white papers, articles and much more. We also have created a parametric search tool which helps engineers find products based on their requirement.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]