1. everything RF
  2. RF Newsletters
more
PREV 2nd Oct, 2019 NEXT

New RF & Microwave Products this Week

2 Oct, 2019 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
Date: 2 Oct, 2019
 
Sponsored by ANSYS
 
 
 
New RF & Microwave Products this Week
RF Transistor
400 W GaN MMIC HEMT from 3600 to 3800 MHz

RF Transistor  from Wolfspeed, A Cree Company

The GTRA384802FC from Wolfspeed is a high power GaN on SiC HEMT transistor that operates from 3600 to 3800 MHz. It provides an output power up to 400 W with gain of 13.7 dB and efficiency of 62%. The transistor requires a 48 V power supply and is available in a thermally enhanced package with earless flange. It is ideal for multi-standard cellular power amplifier applications.
Download Datasheet | Product Details
RF Spectrum Analyzer
Handheld Spectrum Analyzer from 9 kHz to 54 GHz

RF Spectrum Analyzer  from Anritsu

The Field Master Pro MS2090A from Anritsu is a handheld RF spectrum analyzer that operates up to 54 GHz and has a real-time spectrum analysis bandwidth of up to 100 MHz. It has a Displayed Average Noise Level (DANL) of less than -160 dBm and Third Order Intercept (TOI) of +20 dBm, for more accurate spectrum clearing, radio alignment, and harmonic and distortion measurements.
Download Datasheet | Product Details
RF Switch
SPDT Non-Reflective Switch from DC to 26.5 GHz

RF Switch  from MACOM

The MASW-011107-DIE from MACOM is a GaAs-based SPDT non-reflective switch that operates from DC to 26.5 GHz. It has an insertion loss of 1.3 dB and high isolation at 46 dB when operating at 20 GHz. This switch is available as a bare DIE and is ideal for SATCOM, 5G wireless, test and measurement (T&M), EW and microwave radio applications.
Download Datasheet | Product Details
RF Module
Pre-Certified Zigbee, Thread and Bluetooth Mesh Module

RF Module  from Silicon Labs

The MGM210P is a pre-certified module that supports Zigbee, Thread, Bluetooth 5.1, Bluetooth Mesh or multi-protocol (Zigbee + Bluetooth 5.1) connectivity and networking capabilities. This multiprotocol module has an optimized form-factor with an integrated chip antenna and low profile for space-constrained IoT designs including smart lighting, HVAC, building, and factory automation systems.
Download Datasheet | Product Details
RF Connector
Solder End Launch SMPM Male Connector up to 65 GHz

RF Connector  from Cinch Connectivity Solutions

The 125-0701-811 from Cinch is an SMPM Male Connector that operates up to 65 GHz. This 50 ohm connector has end launch design with a Straddle Mount style and supports a 0.063” board thickness, with tighter tolerance spacing of 0.066”, ensuring a snug fit to the PCB. It has been designed for very high-frequency applications where space is limited and package density is critical.
Download Datasheet | Product Details
RF Amplifier
Power Amplifier from 10 to 40 GHz

RF Amplifier  from Millimeter Wave Systems

The200217-01 from Millimeter Wave Systems is a wideband medium power amplifier that operates from 10 to 40 GHz. It provides 25 dBm of saturated output power with a small signal gain of 20 dB at 20 GHz, and requires 15 VDC to operate. This amplifier is available in a module with 2.92 mm connectors.
Download Datasheet | Product Details
Sponsored by ANSYS
ANSYS
5G Antenna Solutions
ANSYS tools simulate antenna-to-antenna coupling and environmental effects on signal propagation to improve capacity and data rates for wireless applications. Download the white paper to learn more. Click here to learn more.
 
Block Up Converter
40 W Ku-Band Block Up Converters

Block Up Converter  from AnaCom, Inc

The mBUCs from AnaCom are Ku-Band Block Up Converters that provide output power from 4 to 40 W. They up-convert an input frequency from 950 to 1700 MHz to an output frequency from 13.75 to 14.50 GHz. These BUCs provide up to 71 dB of gain while operating from a supply voltage of 24 - 48 VDC and consume 45 to 720 of watts power.
Download Datasheet | Product Details
Satellite Link Emulator
950 to 1950 MHz Satellite Link Emulator with up to 200 MHz Bandwidth

Satellite Link Emulator  from Polaris

The PSLE-L-200D from Polaris is a Satellite Link Emulator for geostationary satellites that operates from 950 to 1950 MHz with a bandwidth of up to 200 MHz. It is an ideal solution for satellite modem testing, satellite to earth station RF link testing, spacecraft payload testing and in general testing systems using satellite communications.
Download Datasheet | Product Details
RF Quartz Crystal
Ceramic Quartz Crystal from 36 to 80 MHz

RF Quartz Crystal  from IQD Frequency Products

The IQXC-240 from IQD is a quartz crystal with a resonant frequency from 36 to 80 MHz. It has frequency stability of ±10ppm over the commercial temperature range from -20 to 70 degrees C and ±15ppm over the industrial temperature range of -40 to 85 degrees C. The crystal has a frequency tolerance of up to ±7ppm and the load capacitance of 5pF.
Download Datasheet | Product Details
OCXO
10 to 40 MHz High Stability Oven Controlled Crystal Oscillator

OCXO  from Vectron International

The OX-601 mini OCXO from Vectron operates from 10 to 40 MHz. It provides an extremely low phase noise of -155 dBc/Hz at 10 kHz offset with an LVCMOS output. The OCXO requires a 3.3 V supply voltage and has an excellent temperature stability of ±10ppb over –40 to 95°C.
Download Datasheet | Product Details
Horn Antenna
14.6 dBi Gain Horn Antenna from 26.5 to 40 GHz

Horn Antenna  from AH Systems Inc

The SAS-588 from AH Systems is a horn antenna that operates from 26.5 to 40 GHz. This linearly polarized antenna provides 14.6 dBi of gain and can handle up to 10 watts of CW Power. It has low VSWR, a constant antenna factor and can be used to generate fields in excess of 100 V/m. The antenna measures 2.9 x 0.6 x 0.9 inches and has a WR-28 waveguide interface.
Download Datasheet | Product Details
Antenna
GNSS/LTE/5G/WiFi Multi-Band Antenna for Rail Applications

Antenna  from PCTEL

The Coach II antennas combine precision multi-constellation GNSS with high-performance LTE, sub-6 GHz 5G, Bluetooth, and WiFi connectivity.They have four 5G elements compatible with the leading multi-carrier cellular routers that support 600 MHz to 3800 MHz frequencies.
Download Datasheet | Product Details
Sponsored by ANSYS
 
 
 
Antenna
3.3 to 3.7 GHz Omni-directional Antenna for Base Station Applications

Antenna  from MP Antenna

The 08-ANT-0892 from MP Antenna is an Omni-directional antenna for base station data communications that operates from 3.3 to 3.7 GHz. This multi-polarized antenna provides a gain of 8 dBi and can handle up to 50 W of input power. The antenna has built-in spatial diversity, which helps it to capture signals in any polarization allowing users to transmit and receive behind buildings, hills and in valleys.
Download Datasheet | Product Details
RF Amplifier
DC to 6 GHz High Dynamic Range Ceramic Amplifier

RF Amplifier  from Mini Circuits

The CMA-81+ from Mini-Circuits is a wideband monolithic amplifier that operates from DC to 6 GHz. It provides an output power of 19.5 dBm with a gain of 10 dB and has a high IP3 of 38 dBm. This high dynamic range amplifier uses a patented, Transient Protection Darlington Configuration circuit architecture and is fabricated using InGaP HBT technology.
Download Datasheet | Product Details
RF Amplifier
4 kW C-Band SSPA for Weather Radar Applications

RF Amplifier  from WAVICE

The WM0550574K from WAVICE is a GaN Solid State Power Amplifier that operates from 5.5 to 5.7 GHz. This C-band amplifier provides a saturated peak output power of 4 kW with a pulse width of 200μs and 10% duty cycle. It is available in a module that measures 17.72 x 19.68 x 11.81 inches with an N-type (F) connector at the input and a WG187 waveguide interface at the output.
Download Datasheet | Product Details
RF Amplifier
Linear Power Amplifier from 30 to 88 MHz

RF Amplifier  from AR Modular RF

The AR-5010 from AR Modular is a Class A amplifier designed with optimized performance to support linearly modulated, multicarrier waveforms with high crest factors. The amplifier operates from 30 to 88 MHz and delivers 500 W of output power with a gain of 68 dB, and has a noise figure of 12 dB.
Download Datasheet | Product Details
RF Amplifier
Push-Pull Amplifier MMIC from 50 to 1200 MHz

RF Amplifier  from ASB Inc.

The ABB817 from ASB is a Push Pull Amplifier MMIC designed for CATV Line Amplifiers, HFC Nodes, and Head End Equipment applications. It operates from 50 to 1200 MHz and has an output IP3 of 45 dBm with a gain of 17.3 dB @ 500 MHz and a noise figure of 3.7 dB. The amplifier requires a supply voltage of 12 V. It is available in a surface mount package that measures 7.8 x 6.4 mm.
Download Datasheet | Product Details
DRO
8 to 10.7 GHz Dielectric Resonant Oscillator with Electrical Tuning

DRO  from Raditek

The RDRO-A-8.0-10.7GHz from Raditek is a Dielectric Resonant Oscillator (DRO) with a frequency from 8 to 10.7 GHz. It has a low phase noise of -85 dBc at 10 kHz offset and frequency stability of up to 5 ppm/C over a temperature range from 0 to 50° C. The DRO provides an output power of 15 dBm while operating over a 6 - 18 volt supply.
Download Datasheet | Product Details
Power Divider
4 Way Power Divider from 4 to 18 GHz

Power Divider  from Werbel Microwave

The WMPD04-4-18-S-FS from Werbel Microwave is a 4-way power divider that operates from 4 to 18 GHz. The divider has an insertion loss of less than 1.3 dB, isolation of over 15 dB, and can handle up to 10 watts of input power. It is available in a module with SMA female connectors.
Download Datasheet | Product Details
90 Degree Hybrid Coupler
90° Hybrid Coupler from 2 to 18 GHz

90 Degree Hybrid Coupler  from Electro-Photonics LLC

The Q3XP-10000R-SMA from Electro-Photonics is a 90° Hybrid Coupler that operates from 2 to 18 GHz. It has a coupling value of 3 dB, an insertion loss of less than 1.2 dB, and isolation of over 20 dB. The coupler can handle up to 20 W of power and has an amplitude balance of +/-1 dB.
Download Datasheet | Product Details
RFID Tag
On-Metal UHF RFID Tag from 860 - 960 MHz (Global)

RFID Tag  from Xtreme RFID

The RF020 from Xtreme RFID is an EPC Class 1 Gen 2, ISO 18000-6C UHF RFID tag that operates from 860 - 960 MHz (Global). Based on Alien Technology Higgs 3 IC, this tag has a read range of 7.62 Meters (25 Feet), User Memory of 96 bit and EPC Memory 96 bit.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]