1. everything RF
  2. RF Newsletters
more
PREV 9th Oct, 2019 NEXT

New RF & Microwave Products this Week

9 Oct, 2019 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
Date: 9 Oct, 2019
 
Sponsored by Coilcraft
 
 
 
New RF & Microwave Products this Week
Front End Module
3.3 to 5 GHz Rx Front-End Module for 5G Massive MIMO

Front End Module  from NXP Semiconductors

The AFRX5G372 from NXP Semiconductors is an integrated multi-chip Rx front end module (FEM) designed for TD-LTE and 5G Massive MIMO applications. This module operates from 3300 to 5000 MHz and provides a gain of 34 dB and a noise figure of 1.6 dB at 5000 MHz in the receive mode.
Download Datasheet | Product Details
Vector Network Analyzer
2-Port USB Controlled VNA from 300 kHz to 6.5 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The SC5065 from Copper Mountain Technologies is a modular 2-port compact VNA for 2-path measurements that operates from 300 kHz to 6.5 GHz. It has a dynamic range of 140 dB, an output power of 15 dBm, and a typical measurement speed of 16 µs per point. The VNA has a directivity of 46 dB and can be used to measure all four S parameters (S11, S21, S12, and S22).
Download Datasheet | Product Details
RF Spectrum Analyzer
9 kHz up to 110 GHz Ultra-portable, Millimeter Wave Spectrum Analyzer

RF Spectrum Analyzer  from Anritsu

The Spectrum Master MS2760A is an ultra-portable, millimeter wave spectrum analyzer that can be used to verify high-frequency designs, including those used in 5G and E-band applications. It is available in multiple frequency options that vary from 9 kHz to 110 GHz (32 GHz, 44 GHz, 50 GHz, 70 GHz, 90 GHz and 110 GHz).
Download Datasheet | Product Details
Band Pass Filter
2300 to 2400 MHz Cavity Band Pass Filter

Band Pass Filter  from Anatech Electronics

The AB2350B490 from Anatech Electronics is a Cavity Band Pass Filter for Wi-Fi applications with a passband from 2300 to 2400 MHz. The filter has an insertion loss of less than 1.7 dB and 80 dB of rejection above and below the passband. It can handle up to 70 watts of power and is available in a module that measures 3.54 x 1.47 x 1.03 inches with SMA female connectors.
Download Datasheet | Product Details
RF Power Meter
10 MHz to 1000 MHz Battery Powered RF Power Meter

RF Power Meter  from BSRF

The PM-1 from BSRF is a Broadband CW Power Meter that operates from 10 MHz to 1000 MHz. The power meter has a dynamic range of 43 dB and can measure signals from -10 dBm to 33 dBm with an accuracy of 0.2 dB. This battery-operated benchtop device can display the power level in W or dBm.
Download Datasheet | Product Details
Signal Generator
USB Programmable Signal Generator from 1.5 to 6 GHz

Signal Generator  from Vaunix

The LSG-602 from Vaunix is a USB programmable signal generator that operates from 1.5 to 6 GHz (S and C-Band) with a resolution of 100 kHz and switching time of 10 microseconds. The signal generator provides calibrated power control from -40 dBm to 10 dBm in 0.5 dB steps. The generated signal has a phase noise of better than -95 dBc/Hz at 100 kHz offset, spurious lower than -70 dBc and harmonics less than -10 dBc.
Download Datasheet | Product Details
Sponsored by Coilcraft
0402 Sized Package
New Chip Inductors Offer Highest Q in an 0402 Sized Package
Coilcraft 0201HL Series chip inductors are available in seven inductance values ranging from 22 to 51 nH, the highest currently offered in a wirewound 0201 package. This range is fully optimized for impedance matching in 700 MHz band LTE and 5G applications. Click here for Free samples!
 
RF Variable Attenuator
8-Channel Programmable Attenuator System from 200 MHz to 6 GHz

RF Variable Attenuator  from JFW Industries

The 50PA-506 from JFW Industries is a Solid State Programmable attenuator system that operates from 200 MHz to 6 GHz. It has eight individually controlled attenuation channels that each provide a total attenuation range of 63 dB with 1 dB steps. Each attenuation channel has an insertion loss of less than 6.6 dB and can handle up to 33 dBm of input power.
Download Datasheet | Product Details
Waveguide Attenuator
6 dB Waveguide Attenuator from 58 to 67 GHz

Waveguide Attenuator  from Exceed Microwave

The ATN-W-62500-5000-6-15 from Exceed Microwave is a V-band waveguide attenuator that operates from 58 to 67 GHz. It has a nominal attenuation of 6 dB and a return loss of less than 12 dB. The attenuator has a WR-15 waveguide size and has a very short length of 0.250 inches.
Download Datasheet | Product Details
RF Switch
SPDT Non-Reflective Switch from DC to 26.5 GHz

RF Switch  from MACOM

The MASW-011107-DIE from MACOM is a GaAs-based SPDT non-reflective switch that operates from DC to 26.5 GHz. It has an insertion loss of 1.3 dB and high isolation of 46 dB when operating at 20 GHz. This switch is available as a bare die and is ideal for SATCOM, 5G, test and measurement (T&M), EW and microwave radio applications.
Download Datasheet | Product Details
RF Variable Attenuator
Continuously Variable Attenuator from 2 to 4 GHz

RF Variable Attenuator  from ARRA Inc.

The 4484-30 from ARRA is a continuously variable attenuator that operates from 2 to 4 GHz. This 1 channel attenuator has an attenuation range of 10 dB with an accuracy of ±0.75 dB and an insertion loss of 0.5 dB. It has a mechanical dial through which the attenuation level can be regulated.
Download Datasheet | Product Details
OCXO
Low Power, High Stability OCXO from 8 to 100 MHz

OCXO  from Dynamic Engineers

The OCXO3317AW Series of OCXOs from Dynamic Engineers are very low power, high stability, low phase noise oven-controlled crystal oscillators that operate from 8 MHz to 100 MHz. They consume up to 70 mW of power and have a stability of less than ±10 ppb over the temperature range from -40°C to +85°C.
Download Datasheet | Product Details
Voltage Controlled SAW Oscillator
Low Phase Noise VCSOs with 800 MHz, 1 GHz, 1.6 GHz and 2 GHz Frequencies

Voltage Controlled SAW Oscillator  from Rakon

The RSV2522 series are Voltage Controlled SAW Oscillators (VCSO) that generate frequencies of 800 MHz, 1 GHz, 1.6 GHz and 2 GHz. The VCSOs use high performance SAW resonators to generate 800 MHz and 1 GHz frequency outputs, and have a frequency doubler to reach 1.6 GHz and 2 GHz frequencies, respectively.
Download Datasheet | Product Details
Sponsored by Coilcraft
0201 Sized Package
New Chip Inductors Offer Highest L in an 0201 Sized Package
Coilcraft 0201HL Series chip inductors are available in seven inductance values ranging from 22 to 51 nH, the highest currently offered in a wirewound 0201 package. This range is fully optimized for impedance matching in 700 MHz band LTE and 5G applications. Click here for Free samples!
 
Front End Module
5 GHz Front End Module for Wi-Fi 802.11ax Systems

Front End Module  from Qorvo

The QPF4530 from Qorvo is an integrated front end module (FEM) designed for Wi-Fi 802.11ax systems. It operates from 5150 to 5925 MHz and integrates a 5 GHz power amplifier (PA), regulator, SPDT switch, and a low noise amplifier (LNA) with bypass. The FEM provides a transmit gain of over 30 dB, receive gain of 15 dB and has a noise figure of 2 dB while operating over a 3.3 V supply.
Download Datasheet | Product Details
RF Amplifier
Ultra-Low Noise Cryogenic Amplifier from 65 to 115 GHz

RF Amplifier  from Low Noise Factory

The LNF-LNC65_115WB from Low Noise Factory is an ultra-low noise cryogenic amplifier that operates from 65 to 115 GHz. The amplifier provides a gain of 23 dB with a noise figure of 0.4 dB. It requires a supply voltage of 1 V and is available in a waveguide module that measures 14.92 x 23 x 19.2 mm with a WR10 waveguide, UG387/U flange on one end and a Nano-D connector on the other end.
Download Datasheet | Product Details
RF Amplifier
125 W Solid State Amplifier from 1 to 2.5 GHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 125S1G2z5 from AR RF/Microwave Instrumentation is a solid-state, self-contained, air-cooled CW Amplifier that operates from 1 to 2.5 GHz. This broadband amplifier is ideal for applications where instantaneous bandwidth, high gain and linearity are required. When used with a sweep generator, the amplifier provides a minimum of 125 watts of RF power.
Download Datasheet | Product Details
RF Amplifier
130 W GaN Power Amplifier from 700 MHz to 6 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP2070C from Exodus Advanced Communications is a solid-state power amplifier that operates from 0.7 to 6 GHz. This class A/AB GaN amplifier produces over 130 watts of power with a gain of over 50 dB. The amplifier has excellent gain flatness, optional monitoring parameters for Forward/Reflected power, voltage, current & temperature sensing for superb reliability and ruggedness.
Download Datasheet | Product Details
RF Amplifier
C-Band Super Low Noise Amplifier with Fault Detection

RF Amplifier  from AmpliTech

The APT3-05400590-1010-LS-D4-FAC is a Low Noise amplifier that operates from 5.4 to 5.9 GHz. It provides a P1dB of 12 dBm and a gain of 28 dB with a noise figure of less than 0.9 dB. An internal limiter at the input provides protection of up to 2W CW of RF input power over the full band.
Download Datasheet | Product Details
Termination
30 W Low PIM Termination from 0.38 to 2.7 GHz

Termination  from MECA

The LPT30-4310M from MECA is a Low PIM Termination that operate from 0.38 to 2.7 GHz. It is matched to 50 ohms and can handle an average power up to 30 watts and peak power up to 5 KW. The termination has PIM values as low as -155 dBc and is thermally compensated to handle full rated power to 85 degrees C.
Download Datasheet | Product Details
Antenna
6 in 1 Adhesive Mount Antenna for GNSS, 5G/4G and WiFi Applications

Antenna  from Taoglas

The MA931.A.LBICGH.008 from Taoglas is a low profile 6-in-1 wall mount antenna that designed for IoT Gateway and Router devices. This antenna includes two 5G/4G MIMO antennas (617-5925 MHz), three dual-band 2.4/5.8GHz Wi-Fi antennas and one GNSS antenna supporting GPS-GLONASS-GALILEO-BeiDou for location accuracy.
Download Datasheet | Product Details
RF Surge Protector
4.3-10 F/F Bulkhead Coaxial RF Surge Protector from 698 MHz to 2.7 GHz

RF Surge Protector  from L-COM

The LCSP1061 from L-Com is a 4.3-10 F/F Bulkhead Coaxial RF Surge Protector that operates from 698 MHz to 2.7 GHz. It has a low PIM of -173 dBc and VSWR as low as 1.12:1. The device can handle an input power of up to 500 W and has multi-strike capability. It can handle surge currents of up to 20 kA for DC and 40kA for RF.
Download Datasheet | Product Details
GNSS Module
High-Performance IRNSS+GPS+GAGAN Module

GNSS Module  from Navika Electronics

The Navika-550 is a GNSS module that supports IRNSS and GPS signals with GAGAN Satellite-Based Augmentation System (SBAS). It has acquisition and tracking sensitivity of -145 dBm and -160 dBm respectively. The module operates over a single 3.3V supply voltage.
Download Datasheet | Product Details
RFID Tag
UHF RFID Tag for Metal Surfaces with a 1.6 Meter Range

RFID Tag  from Abracon LLC

The ART915X100202TO-IC from Abracon is an ISO 18000-6C/EPC Class1 Gen2 compliant RFID tag that operates from 866 to 868 MHz and 902 to 928 MHz. It utilizes the Alien H3 RFID chipset and has a read range of up to 1.6 m. The tag is available in a package that measures 10 x 2.5 x 2.5 mm and is compatible with any material, including metal.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]