PREV 6 August, 2014 NEXT

New RF & Microwave Products this Week

6 August, 2014 - everything RF Newsletter
 
everything RF
Date: 6 August, 2014
 
Sponsored by Mouser
 
 
 
New RF & Microwave Products this Week
Power Sensor
High Accuracy Power Sensor from 9 kHz to 8 GHz

Power Sensor from LadyBug Technologies

The LB5908L from LadyBug is a high accuracy RF power sensor that operates from 9 kHz to 8 GHz. It is based on LadyBug’s patented No-Zero No-Cal technology which cuts of the need for calibration - you do not need to zero the sensors before use, simply connect and measure, even for high accuracy at very low power levels.
 
Download Datasheet | Product Details
 
RF Connector
Non-Magnetic Connectors for MRI Equipment Designed to Protect Against Image & Magnetic Field Distorton

RF Connector from Isotec

The Non-Magnetic Connectors from ISOTEC have been specifically designed for medical systems to protect against image and magnetic field distortion. They are available in MMCX, MCX, SMB and SMA configurations. The MMCX and the MCX connectors operate up to 6 GHz, SMB connectors up to 4 GHz and the SMA connectors operate up to 18 GHz.
 
Download Datasheet | Product Details
 
Power Divider
3 Way DC Blocking Power Divider from 700 MHz to 2700 MHz

Power Divider from In Stock Wireless

The PD5030 from In Stock Wireless is 3 Way DC blocking Power Divider/Combiner that operates from 700 to 2700 MHz. It has a 0.4 dB insertion loss, 18 dB of isolation and can handle up to 40 watts of input power when operating as a splitter or combiner. The PD5030 is available as a module with N Type female connectors matched to 50 Ohms. It can be used for a wide range of wireless applications.
 
Download Datasheet | Product Details
 
90 Degree Hybrid Coupler
20 to 1000 MHz 90 Degree Hybrid Coupler

90 Degree Hybrid Coupler from Innovative Power Products

The IPP-2247 is a 90 degree hybrid coupler that operates from 20 to 1000 MHz. It has an isolation of greater than 16 dB, VSWR of 1.3:1 and can handle up to 150 W of CW power. The hybrid coupler is available is surface mount package that measures 2.2 x 3 inches.
 
Download Datasheet | Product Details
 
RF Switch
450 MHz to 4 GHz UltraCMOS SP5T Switch for 3G/4G Wireless Infrastructure Applications

RF Switch from Peregrine Semiconductor

The PE42452 is an UltraCMOS SP5T switch that operates from 450 to 4000 MHz. This switch has been designed for use in 3G/4G wireless infrastructure applications. It has a five symmetric RF absorptive ports with an isolation of over 40 dB at 4 GHz.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
Mouser: STEVAL-IDB002V1
Mouser Stocks New Bluetooth® SMART Board Based on BlueNRG
STMicroelectronics STEVAL-IDB002V1 contains an RF daughter board featuring the BlueNRG device, SMA connector for an antenna or measuring instruments and SPI connector for an external microcontroller. Motherboard is based on the STM32L, acting as external microcontroller driving the BlueNRG device. Click to learn more.
 
 
 
Modulator
Low Power IQ Modulator for Next-Generation Wireless Communications

Modulator from Integrated Device Technology

The IDTF1650 from IDT is a Zero/Complex IF modulator with an RF frequency range from 600 to 2400 MHz. The modulator is based on IDT’s Zero-Distortion technology which lowers power consumption and provides a better ACLR at high IP2 and IP3. It interfaces directly to a Tx DAC.
 
Download Datasheet | Product Details
 
RF Amplifier
800 MHz to 6 GHz Compact Amplifier Module Series

RF Amplifier from MILMEGA

The Series 2000 Broadband Amplifiers from MILMEGA are a range of amplifier kits and modules that operate from 800 MHz to 6 GHz with an output power ranging from 1 W to 230 W. The amplifiers can be customized to meet customer requirements.
 
Download Datasheet | Product Details
 
Low Noise Amplifier
2 to 6 GHz Gallium Nitride LNA for Commercial and Military Applications

Low Noise Amplifier from Triquint

The TGA2611-SM is a GaN Low Noise Amplifier from TriQuint that operates from 2 to 6 GHz. The amplifier has a small signal gain of 22 dB with a noise figure of 1 dB. It has an IP3 of 30 dBm, P1dB of 18 dBm and a Psat of 26 dBm. The LNA is available in a 4 x 4 mm QFN package.
 
Download Datasheet | Product Details
 
RF Cable Assembly
Semi-Custom Coaxial Cable Assembly Series from DC to 70 GHz

RF Cable Assembly from High Speed Interconnects

The FL Series of Coaxial Cable Assemblies from High Speed Interconnects are semi-custom assemblies that are available that have 0.047, 0.086 and 0.141 inch cable options with 1.85 mm, 2.4 mm, 2.92 mm, 3.5 mm, SMA, TNC or Type N connectors.
 
Download Datasheet | Product Details
 
Low Pass Filter
Harmonic Low Pass Filters with Cut-off Frequency from 400 MHz to 18 GHz

Low Pass Filter from Anatech Electronics

The LPH Series of harmonic low pass filters have a cut-off frequency from 400 to 18000 MHz. The filters have low loss and can handle up to 50 Watts of power. They have a sharp transition to rejection and are designed to remove interference as well as harmonics.
 
Download Datasheet | Product Details
 
Clock Oscillator
Hermetically Sealed Clock Oscillator from 4 to 54 MHz with a 3.3 V Supply

Clock Oscillator from IQD Frequency Products

The IQXO-445 is a clock oscillator that operates from 4 to 54 MHz. It requires a 3.3V supply and has a CMOS output with a 15 pF drive capability. The oscillator has a frequency stability of ±10ppm to ±20ppm and can operate at a temperature range from -20 to 70°C. The oscillator is available in a 2.5 x 2 mm hermetically sealed package.
 
Download Datasheet | Product Details
 
OCXO
10 MHz High Performance OCXO for Vehicle Mounted Applications

OCXO from KVG Quartz Crystal Technology GmbH

The O.30.803954-LF is a 10 MHz compact, high performance OCXO with a low phase noise and good frequency stability. The OCXO requires a 12 V supply and is available in a small hermetically sealed CO8 metal package that enables it to perform in humid climates.
 
Download Datasheet | Product Details
 
Microwave Absorber
Thin and Flexible EMI Absrober Sheets

Microwave Absorber from INTERMARK USA, Inc.

The MG-11A from Intermark is a very thin and flexible EMI suppression sheet. It can be used to reduce emissions from CPUs, cables or enclosures. It supresses the interface between antennas and metals in the vicinity. The sheets are available with a thickness of 0.05, 0.1, 0.2, 0.3 or 0.5 mm and have a magnetic permeability of 100u/1 MHz and volume resistivity of 106 Ohm.cm. The sheet is available in a standard size of 220 x 315 mm.
 
Download Datasheet | Product Details
 
Laminate
Low Loss Laminate for High Speed Digital Applications Beyond 100 Gb/s

Laminate from Isola Group

The Tachyon is a very low loss laminate material designed for high speed digital applications beyond 100 Gb/s. This material has excellent electrical properties and is very stable over a broad frequency and temperature range. It has a dielectric constant (Dk) of 3.02, dissipation factor (Df) of 0.0021 and is stable at temperatures from -55°C and +125°C up to 40 GHz.
 
Download Datasheet | Product Details
 
Fixed Attenuator
DC to 65 GHz, 20 dB Fixed Attenuator with 1.85mm Male to Female Connectors

Fixed Attenuator from Pasternack Enterprises Inc

The PE7403-20 is a 20 dB Fixed Attenuator that operates from DC to 65 GHz. The attenuator is has a 1.85mm Male to Female stainless steel connector interface. It is matched to 50 Ohms and can handle up to 1 Watt of power with a VSWR of 1.65:1. The Attenuator is available in multiple attenuation configurations.
 
Download Datasheet | Product Details
 
RF Mixer
10 MHz to 18 GHz, Two Tone Terminator Mixer Compatible with Sine or Square-Wave

RF Mixer from Marki Microwave

The T3H-18 from Marki Microwave is a two tone terminator mixer with an RF/LO frequency from 10 MHz to 18 GHz and an IF frequency from 10 MHz to 18 GHz. The T3H-18 is available in connectorized, surface mount, and drop-in packages making it suitable for any type of system level integration.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.