1. everything RF
  2. RF Newsletters
more
PREV 27th Nov, 2019 NEXT

New RF and Microwave Products this Week

27 Nov, 2019 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
Date: 27 Nov, 2019
 
Sponsored by Fairview Microwave
 
 
 
New RF and Microwave Products this Week
RF Spectrum Analyzer
Portable Monitoring Receiver from 8 kHz to 8 GHz

RF Spectrum Analyzer  from Rohde & Schwarz

The R&S PR200 is a portable monitoring receiver that operates from 8 kHz to 8 GHz (extended up to 18 GHz with R&S HF907DC SHF handheld antenna). It is an indispensable tool for regulatory authorities, mobile network operators, police forces, military units, and other security organizations. This portable receiver can be used to search for and analyze known and unknown radio emissions and to localize signal sources.
Download Datasheet | Product Details
RF Amplifier
0.1 to 40 GHz Low Noise Amplifier

RF Amplifier  from L3Harris Narda-MITEQ

The LNA-30-00104000-75-15P from L3Harris Narda-Miteq is a low noise amplifier that operates from 0.1 to 40 GHz. It provides a gain of more than 30 dB with a noise figure of 7.5 dB and a P1dB of over 15 dBm. The amplifier requires a supply of 15 V and consumes up to 500 mA of current.
Download Datasheet | Product Details
RF Variable Attenuator
High Power Coaxial Attenuator from 925 MHz 1.225 GHz

RF Variable Attenuator  from ARRA Inc.

The 2-3487-30A from ARRA is a continuously variable coaxial attenuator that operates from 925 MHz to 1.225 GHz. This attenuator has an attenuation range of 30 dB and an insertion loss of less than 0.5 dB. It can handle up to 50 watts of average input power and is available in a module with SMA or N-Type connectors.
Download Datasheet | Product Details
Quadplexer
250 W Quadplexer for 700/850/PCS/AWS Applications

Quadplexer  from Microlab

The BK-962 from Microlab is a Quadplexer that allows combination and separation of the signals in frequency bands: 698-798 MHz, 817-894 MHz, 1850-2000 MHz (PCS), and 1695-1780/2110-2180 MHz (AWS). It has low-PIM of less than -161 dBc, insertion loss of under 0.5 dB and isolation of more than 50 dB between the bands.
Download Datasheet | Product Details
RF Amplifier
80 W Power Amplifier from 3400 to 3800 MHz

RF Amplifier  from RFcore

The RCA3438H49D0 from RFcore is a High-Power Amplifier that operates from 3400 to 3800 MHz. It provides a saturated output power of 80 Watts and a power gain of over 49 dB while operating from a 28 V DC supply. The amplifier is available in a module that measures 170 x 135 x 25 mm with SMA female connectors.
Download Datasheet | Product Details
Tunable Filter
Tunable Band-Pass Filter from 9.75 to 22 GHz

Tunable Filter  from Analog Devices

The ADMV8420 is a tunable MMIC band-pass filter with a passband from 9.75 to 22 GHz. The filter has a 3 dB bandwidth of approximately 20% of the center frequency. The center frequency (fc) of the filter can be varied between 11 and 20 GHz by applying a tuning voltage from 0 V to 15 V.
Download Datasheet | Product Details
Sponsored by Fairview Microwave
Fairview Microwave
The Right RF Parts. Right Away
Fairview Microwave is a leading supplier of on-demand RF and microwave products, offering immediate shipment of RF components including attenuators, adapters, coax cable assemblies, connectors, terminations and much more. All products are shipped same-day from the company’s ISO 9001:2015 certified production facilities in Lewisville, Texas. Click here to learn more.
 
RF Amplifier
2.5 GHz Low Power Amplifier Module

RF Amplifier  from NXP Semiconductors

The AFLP5G25641 from NXP is a power amplifier module that operates from 2300 to 2700 MHz. It has three stages of amplification and supports circuitry to work at 3.3 V or 5 V with very low power consumption. This device delivers a P1dB of 25 dBm at 3.3 Vdc and a P1dB of 29 dBm at 5 Vdc with a gain of 32 dB while operating at 2500 MHz.
Download Datasheet | Product Details
RF Amplifier
24 to 27.5 GHz Doherty MMIC Power Amplifier

RF Amplifier  from ICONIC RF

The ICD2629 from ICONIC RF is a two-stage Doherty MMIC power amplifier (PA) that operates from 24 to 27.5 GHz. It provides a saturated output power of 28.5 dBm with a gain of 13 dB and an efficiency of 20% at 8 dB output power backoff (OBO). It is suitable for 5G Phased array antenna systems applications.
Download Datasheet | Product Details
RF Surge Protector
4.3-10 Bulkhead Coaxial RF Surge Protector from 698 to 2700 MHz

RF Surge Protector  from PolyPhaser

The TSX-4310FF-P from PolyPhaser is a 4.3-10 F/F Bulkhead Coaxial RF Surge Protector that operates from 698 MHz to 2.7 GHz. It has a low PIM of -173 dBc and VSWR as low as 1.12:1. The device can handle an input power of up to 500 W and has the multi-strike capability. It can handle surge currents of up to 40 kA.
Download Datasheet | Product Details
GNSS Module
High Precision GNSS Module for UAV Applications

GNSS Module  from u-blox AG

The ZED-F9P is a multi-band GNSS module with integrated multi-band Real Time Kinematics (RTK) technology for machine control, ground robotic vehicles, and high precision unmanned aerial vehicles (UAV) applications. This module concurrently uses GNSS signals from all four GNSS constellations (GPS, GLONASS, Galileo, and BeiDou) plus QZSS satellites.
Download Datasheet | Product Details
Wireless SoC
Fully Compliant Wi-Fi 6 SoC for WLAN Applications

Wireless SoC  from Broadcom

The BCM6710 is a 3x3 Wi-Fi 6 system-on-a-chip (SoC) designed for WLAN applications including Wi-Fi routers, residential gateways, wireless range extenders, and set-top boxes. This SoC is fully compliant to IEEE and Wi-Fi Alliance (WFA) Wi-Fi 6 (802.11ax) requirements and supports three transmit and three receive streams in 2.4 GHz, 5 GHz and future 6 GHz bands.
Download Datasheet | Product Details
Bias Tee
Pick-off Tee from 5 kHz to 8 GHz

Bias Tee  from Werbel Microwave

The PT-1080-30 from Werbel Microwave is an internally-matched Pick-off Tee that provides a flat response while operating from 5 kHz to 8 GHz. The Pick-off tee has a coupling value of 30 dB, an insertion loss of less than 1 dB, and can handle a CW input power of up to 20 W.
Download Datasheet | Product Details
Sponsored by Fairview Microwave
 
 
 
Power Divider
2-Way SMT Power Divider from 10 to 1800 MHz

Power Divider  from MiniRF

The MRFSP8725 from MiniRF is a 2-Way Power divider that operates from 10 to 1800 MHz. The power divider has an insertion loss of less than 1.2 dB and an isolation of 25 dB. It can handle 33 dBm of input power. This 75 ohm divider is available in a small surface-mount package.
Download Datasheet | Product Details
RF Amplifier
3.3 to 3.6 GHz Power Amplifier for 4G/5G-NR Small Cell Applications

RF Amplifier  from Skyworks Solutions

The SKY66318-11 from Skyworks is a high-efficiency power amplifier (PA) that operates from 3.3 to 3.6 GHz. It provides a P1dB of 33 dBm with a gain of 36 dB and an efficiency of 20%. The PA offers a wide instantaneous bandwidth of 100 MHz and is fully input/output matched with high gain and efficiency. It operates from a single supply voltage of 5 V. This amplifier is ideal for 4G LTE and 5G NR systems, small cells, and Macro/ Massive MIMO applications.
Download Datasheet | Product Details
Termination
Coaxial Termination from DC to 18 GHz

Termination  from Mesa Microwave

The MMCT466 from Mesa Microwave is a Coaxial Termination that operates from DC to 18 GHz. This medium power termination can handle 150 watts of average input power and is available with an N-type connector.
Download Datasheet | Product Details
RF Switch
SP6T Electro-Mechanical Switch from DC to 18 GHz

RF Switch  from Renaissance Electronics Corporation

The RSM-6D-L-TTL-12-B from Renaissance Electronics is an electromechanical switch that operates from DC to 18 GHz. This SP6T switch has an insertion loss of less than 0.5 dB and an isolation of over 60 dB. It has a switching speed of under 20 ms. This latching switch has excellent repeatability and long-term reliability and is ideal for use in test & measurement applications.
Download Datasheet | Product Details
RF Shielded Test Enclosure
Stand Alone RF Tunnel Shielded Box from 20 MHz to 6 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-3590 from RF Electronics is a Stand Alone RF Tunnel Shielded Box that operates from 20 MHz to 6 GHz. This fully portable design is equipped with caster wheels for ease of movement. The interior of this enclosure measures 650 mm (W) X 650 mm (H) X 2050 (L). It has a thick RF absorbing foam that provides an isolation of more than 120 dB @ 3 GHz.
Download Datasheet | Product Details
Directional Coupler
30 dB Low PIM Directional Coupler from 0.8 to 2.5 GHz

Directional Coupler  from MECA

The LP715-30-1.650W from MECA is a low PIM directional coupler that operates from 0.8 to 2.5 GHz. It has a coupling value of 30 dB and can handle up to 500 Watts of power. The coupler has an insertion loss of less than 0.1 dB and directivity of more than 25 dB.
Download Datasheet | Product Details
Base Station Antenna
6 dBi, 4-Port OMNI Antenna from 2.5 to 2.7 GHz

Base Station Antenna  from Radio Waves

The POMNQX-2.7 from Radiowaves is a 4-port Omni-directional Antenna that operates from 2.5 to 2.7 GHz. It provides a gain of up to 6 dBi and has a 45-degree slant polarization. The antenna can handle up to 100 watts of power and has a port to port isolation of 23 dB.
Download Datasheet | Product Details
Base Station Antenna
2.4 - 2.5 GHz & 5.1 - 5.9 GHz Flat Panel, Multi MIMO Antenna

Base Station Antenna  from ITELITE

The PAT2450G13XP is a multi MIMO flat panel antenna that operates from 2.4 to 2.5 GHz and 5.1 to 5.9 GHz. This directional antenna delivers a gain of up to 14 dBi with port isolation of over 20 dB and front to back ratio of more than 30 dB. It is ideal for 2.4 GHz Wireless LAN, 5 GHz Wireless LAN, IEEE 802.11a/b/g/n and Point to Multipoint Applications.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide users with the latest news, information on new product releases, upcoming events, articles, white papers, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]