1. everything RF
  2. RF Newsletters
more
PREV 11 Dec, 2019 NEXT

New RF & Microwave Products this Week

11 Dec, 2019 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
Date: 11 Dec, 2019
 
Sponsored by Digikey
 
 
 
New RF & Microwave Products this Week
RF Variable Attenuator
Relay Controlled Programmable Attenuators from DC to 2 GHz

RF Variable Attenuator  from Fairview Microwave

The FMAT Series from Fairview Microwave are relay controlled programmable attenuators that operate from DC to 2 GHz. These attenuators have 6 to 8 relay bits and can provide attenuation from 0 to 127 dB in steps ranging from 0.25 to 64 dB. They have an insertion loss of less than 3.5 dB and can handle 1 W of CW input power.
Download Datasheet | Product Details
RF Mixer
20 to 32 GHz (K and Ka-band) GaAs Sub-Harmonic Mixer

RF Mixer  from Custom MMIC

The CMD310C3 from Custom MMIC is a GaAs Sub-Harmonic Mixer with an RF/LO frequency from 20 to 32 GHz and IF Frequency from DC to 7 GHz. The mixer has an integrated LO amplifier and can be used as an upconverter or downconverter. The device has a low conversion loss of 8.5 dB and excellent LO to RF Isolation of 36 dB eliminating the need for additional filtering.
Download Datasheet | Product Details
Tunable Filter
Manually Tunable Band Pass Filter from 6.2 to 6.8 GHz

Tunable Filter  from Wainwright Instruments

The WTBW2-6200-6800-1-40-20SSK from Wainwright Instruments is a bandpass filter with a manually tunable passband of 1 to 3 MHz. The center frequency (Fo) can be selected by the customer to be between 6.2 and 6.8 GHz. This filter has an insertion loss of less than 8 dB and provides more than 20 dB of attenuation above and below the band.
Download Datasheet | Product Details
RF Switch
SP7T Reflective Switch from 2 to 18 GHz

RF Switch  from UMCC

The SR-S200-7S from Universal Microwave Components is an SP7T reflective PIN switch that operates from 2 to 18 GHz. This switch has an insertion loss of less than 3.3 dB, isolation of over 45 dB, and has an on/off time of 60 nsec. It can handle an average CW power of up to 30 dBm and requires -12 / 5V of DC supply. The switch is available in a module with SMA (F) connectors.
Download Datasheet | Product Details
Digital Phase Shifter
Programmable Phase Shifter Assembly from 1.5 to 3 GHz

Digital Phase Shifter  from JFW Industries

The 50PSA-102 from JFW Industries is a solid-state programmable phase shifter assembly that operates from 1.5 to 3 GHz. The assembly has up to 9 individually controlled phase shifters with a phase range from 0 to 358.6 degrees in 1.4 degrees steps. The center frequency is selectable in 10 MHz steps for better phase accuracy across the desired band and each phase shifter can be assigned a different center frequency.
Download Datasheet | Product Details
TCXO
100 MHz High Stability TCXO with LVPECL Output

TCXO  from Dynamic Engineers

The TCXO914AW-100MHz-A from Dynamic Engineers is a high stability TCXO that operates at 100 MHz. It has a phase noise of -170 dBc/Hz @100 kHz and frequency stability of up to ±0.5 ppm over a temperature range of -40 to 85 degrees Celsius. This TCXO provides an LVPECL output while operating on a supply voltage of 3.3 V.
Download Datasheet | Product Details
Sponsored by Digi-Key
Amphenol
Amphenol Sine Ecomate Family Available Now from Digi-Key
The ecomate family of connectors consists of circular plastic, rugged metal, high amperage and waterproof connectors in a wide variety of arrangements. These connectors offer a wide variety of applications and are typically used in the fields of machine building, agriculture, lighting or robotic. Click here to learn more.
 
RF Amplifier
C-Band Solid State Bi-Directional Amplifier from 5125 to 5875 MHz

RF Amplifier  from NuWaves Engineering

The NW-BA-C-10-RX03-C037 from NuWaves is a C-Band Solid State Bi-Directional Amplifier module that operates from 5125 to 5875 MHz. It provides a gain of 10 dB with an RF power of more than 10 watts while operating with 20% efficiency. The BDA has autosense transmit / receive (T/R) mode selection for automatic transmit/receive switching.
Download Datasheet | Product Details
RF Amplifier
2-Stage Dual LDMOS Power Amplifier from 1805 to 2200 MHz

RF Amplifier  from Wolfspeed, A Cree Company

The PTMC210124MD from Wolfspeed is an LDMOS power amplifier that operates from 1805 to 2200 MHz.This amplifier has two inputs and two outputs that provide an output power of 6 Watts each. The amplifier requires a supply voltage of 28 V and is available in a 14-lead plastic overmold package with gull-wing leads.
Download Datasheet | Product Details
RF Amplifier
Ku-Band Waveguide Low Noise SATCOM Amplifier

RF Amplifier  from AmpliTech

The APTW6-10701275-75K10-WR75-D6 from AmpliTech is a high gain, low noise SATCOM amplifier that operates from 10.7 to 12.75 GHz. It delivers a gain of more than 60 dB with a noise figure of 0.88 dB and an output power of 15 dBm. This amplifier is pressurizable to 5 psi and has an inbuilt reverse voltage protection.
Download Datasheet | Product Details
DC Block
Inner DC Block from 250 kHz to 40 GHz

DC Block  from MECA

The 500-1K from MECA is an Inner DC Block that operates from 250 kHz to 40 GHz. The DC block provides an insertion loss of less than 1.25 dB and an Input/Output VSWR of up to 1.65:1. This connectorized DC Block has 2.92 mm M/F connectors with a breakdown voltage of 75 V and can handle up to 10 Watts of average power.
Download Datasheet | Product Details
Limiter
RF Power Limiter from 10 MHz to 2.5 GHz

Limiter  from Teledyne e2v HiRel Electronics

The TDLM025100 from Teledyne e2v HiRel Electronics is a drop-in limiter that operates from 10 MHz to 2.5 GHz. This limiter has a threshold level configuration from 7 to 13 dBm and can limit up to 50 dBm (100 W) of peak power with a fast response time of less than 1 ns. It is qualified for operating in harsh environments, including military, space, avionics and medical applications.
Download Datasheet | Product Details
SATCOM Amplifier System
Ka-Band SATCOM Low Noise Amplifier from 17.7 to 20.2 GHz

SATCOM Amplifier System  from Orbital Research

The WB Ka LNA is a Ka-Band Low Noise Amplifier that operates from 17.7 to 20.2 GHz. The amplifier provides a P1dB of over 13 dBm with gain of 55 dB, and has a low noise temperature of 120 K. It is ideal for use in SATCOM, satellite teleports, gateways, telemetry, tracking and command applications.
Download Datasheet | Product Details
Sponsored by Digi-Key
Cable Assemblies
Amphenol Sine C091 (M16) AISG/RET Connectors and Cable Assemblies Available Now from Digi-Key
C091 (M16) AISG/RET connectors and cable assemblies for wireless infrastructure are built for outdoor use and have extreme requirements. System coupling integrity, temperature resistance, salt mist resistance, and UV resistance are a few of the important criteria these connectors meet. Click here to learn more.
 
RF Amplifier
15 W Ultra Wide Band Power Amplifier from 18 to 45 GHz

RF Amplifier  from RF-Lambda

The RFLUPA18G45G32CDK from RF-Lambda is a wide-band power amplifier that operates from 18 to 45 GHz. The amplifier provides a saturated output power of 42 dBm (40 dBm P1dB) with a gain of 45 dB. It requires a supply voltage of 15 V and consumes up to 12 A of current.
Download Datasheet | Product Details
Band Pass Filter
Band Pass Hairpin Filter from 6.9 to 7.4 GHz

Band Pass Filter  from Networks International Corporation

The TR-102 from NIC is a Bandpass Hairpin Filter with a passband from 6900 to 7400 MHz. The filter has an insertion loss of less than 1 dB and more than 50 dBc of rejection above and below the passband. This low profile filter is available in a surface-mount package that measures 0.92 x 0.32 x 0.170 inches and is a perfect fit for front end receiver applications.
Download Datasheet | Product Details
Cellular IoT Module
Multi-Band Compact LTE Cat NB2 Module

Cellular IoT Module  from Quectel

The BC66-NA from Quectel is a multi-band LTE Cat NB2 module, designed to be compatible with Quectel GSM/GPRS and LTE Cat NB1 modules providing a flexible and scalable platform for upgrading from a GSM/GPRS to an NB-IoT network. The module also supports band 71 and band 85 to accommodate more operators.
Download Datasheet | Product Details
OCXO
200 MHz to 6 GHz OCXOs with Sine Wave Output

OCXO  from MtronPTI

The XO9095 series from Mtron PTI are high-frequency OCXOs with an oscillation frequency from 200 MHz to 6 GHz. The OCXOs have exceptional stability, low-g sensitivity and low phase noise of -135 dBc/Hz at 1 kHz offset. These oscillators require a supply voltage of 5 V and provide a Sinewave waveform output.
Download Datasheet | Product Details
RF Switch
High-Power SPST Switch from 2.5 to 3.1 GHz

RF Switch  from Daico Industries

The DSW16285 from Daico Industries is a high-power SPST switch that operates from 2.5 to 3.1 GHz. It has an isolation of over 50 dB and can handle an RF input power of up to 15 Watts. The switch has a switching speed of 1µS and draws a current of 70 mA from a positive supply of 15 Vdc.
Download Datasheet | Product Details
RF Shielded Test Enclosure
RF Shielded Enclosure from 300 MHz to 13 GHz

RF Shielded Test Enclosure  from DVTest

The dbSAFE DUO from DVTEST is a shielded RF enclosure with a double-wall design that operates from 300 MHz to 13 GHz. It provides isolation of up to 100 dB and has a custom RF absorber foam that eliminates unwanted reflections within the RF enclosure. The dbSAFE DUO can be customized to any size required by a customer.
Download Datasheet | Product Details
Directional Coupler
20 dB Directional Coupler from 5 to 1000 MHz

Directional Coupler  from RF Bay

The DCR-20-4 from RF Bay is a Directional Coupler that operates from 5 to 1000 MHz. It has a coupling value of 20 dB and directivity of 21 dB. This 50-Ohm coupler can handle up to 30 dBm of input power and has a VSWR of 1.2:1. The DCR-20-4 is available in a module that measures 1.250 x 1.250 x 0.563 inches with SMA Female connectors.
Download Datasheet | Product Details
RF Capacitor
Multi-Layer Ceramic Capacitor with 0.1µF Capacitance

RF Capacitor  from Murata

The GRM011R60J104M from Murata is a multi-layer ceramic capacitor with a maximum capacitance of 0.1μF. This capacitor has a rated voltage of 6.3 Vdc and can be used at a temperature range from -55°C to 85°C. It is available in 008004 (0.25 x 0.125 x 0.125 mm) package and is ideal for 5G mobile device applications.
Product Details
RF Inductor
Conical Surface Mount Inductor up to 0.170 µH

RF Inductor  from Piconics

The CC20T44K240G5-C from Piconics is a Conical Inductor that operates from DC to 65 GHz with inductance up to 0.170 µH. The inductor has a DCR up to 0.3 Ohms and can handle an input current of under 325 mA. This RoHS compliant surface mount inductor is ideal for fiber-optic applications.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news stories, information on new product releases, upcoming events, articles, white papers and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]