1. everything RF
  2. RF Newsletters
more
PREV 25th Dec, 2019 NEXT

Top RF & Microwave Products of 2019 - Part 2

25 Dec, 2019 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
Date: 25 Dec, 2019
 
Sponsored by PolyPhaser
 
 
 
Top Products of 2019 - Part 2
Front End Module
28 GHz GaN Front End Module for Fixed Wireless 5G Base Stations

Front End Module  from Qorvo

The QPF4001 is a GaN front-end module (FEM) for 28 GHz phased array 5G base stations and terminals. It integrates a high linearity LNA, a low loss transmit/receive switch and a high-gain, high-efficiency multi-stage PA in a single MMIC. The FEM operates from 26 GHz to 30 GHz. The receive path (LNA + TR SW) is designed to provide a gain of 17 dB and a noise figure of 3.5 dB.
Download Datasheet | Product Details
RF & Microwave Isolator
X-Band Space-Qualified Isolator from 7.90 to 8.40 GHz

RF & Microwave Isolator  from DiTom Microwave

The DS1007 from DiTom Microwave is an X-band space-qualified isolator that operates from 7.90 to 8.40 GHz. It has an insertion loss of less than 0.4 dB and an isolation of more than 20 dB. The isolator can handle up to 10 W of forward power and 30 W of peak power. This isolator is available in a module that measures 0.50 x 0.70 x 0.50 inches with SMA (F) connectors.
Download Datasheet | Product Details
RF Test Set
Customizable All-in-One RF Test System up to 20 GHz

RF Test Set  from Elite RF

The S-Series Pro from Elite RF is an All-in-One RF Test System that operates up to 20 GHz. The test setup can be customized to contain a range of test equipment including a Real-Time Spectrum Analyzer, Vector Network Analyzer, Signal Generator, RF Power Meter and other devices.
Download Datasheet | Product Details
Beamforming IC
Ku-Band SATCOM Transmitter IC from 12.5 to 15 GHz

Beamforming IC  from Integrated Device Technology

The F6501 from IDT is an 8-channel transmitter (TX) silicon IC designed for Ku-Band SATCOM phased array applications from 12.5 to 15 GHz. The core IC has 360° 6-bit phase control coupled with 35 dB 6-bit gain control on each channel to achieve fine beam steering and gain compensation between radiating channels. The device has 25 dB of nominal gain and an OP1dB of over 13 dBm.
Download Datasheet | Product Details
Vector Network Analyzer
2-Port Computer Controlled Metrology-Grade VNA from 300 kHz to 18 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The M5180 is a 2-port compact metrology-grade performance VNA from Copper Mountain Technologies that operates from 300 kHz to 18 GHz. This VNA is available in a more economical package that excludes a number of advanced features. It has a dynamic range of 130 dB and can measure up to 200,001 test points with a speed of 30 µs per point.
Download Datasheet | Product Details
RF Spectrum Analyzer
Real-Time Spectrum Analyzer and RF Recorder from 9 kHz to 6 GHz

RF Spectrum Analyzer  from Signal Hound

The BB60C is a Real-Time Spectrum Analyzer and RF Recorder that operates from 9 kHz to 6 GHz. It has a realtime bandwidth of 27 MHz and a resolution bandwidth of up to 10 MHz. It has good spectral purity, wide temperature range operation, broadband I/Q streaming capability, open source code spectrum analysis software.
Download Datasheet | Product Details
Sponsored by PolyPhaser
PolyPhaser
PolyPhaser – We Ship Same-Day!
PolyPhaser engineers and designs innovative lightning and surge protection solutions for RF applications, ensuring reliable operation of critical systems. Click here to learn more.
 
RF Amplifier
GaAs Distributed Low Noise Amplifier from DC to 40 GHz

RF Amplifier  from Custom MMIC

The CMD242K4 from Custom MMIC is a wideband GaAs MMIC distributed low noise amplifier that operates from DC to 40 GHz. The amplifier delivers greater than 10.5 dB of gain with a corresponding noise figure of 5 dB and output output P1dB of 17.5 dBm at 20 GHz. It is available in a leadless surface SMT package that measures 4 x 4 mm.
Download Datasheet | Product Details
Wireless SoC
Multi-Protocol Bluetooth 5.0/Bluetooth Low Energy/ANT/2.4 GHz SoC

Wireless SoC  from Nordic Semiconductor

The nRF52832 is a powerful, highly flexible ultra-low power multiprotocol SoC that supports Bluetooth low energy, ANT and 2.4 GHz applications. It is built around a 32-bit ARM Cortex-M4F CPU with 512 kB + 64 kB RAM. This SoC requires a supply between 1.7 V - 3.6 V and has a comprehensive system of automated and adaptive power management features.
Download Datasheet | Product Details
GNSS Module
GNSS Location IC with an Integrated Sensor Hub

GNSS Module  from Broadcom

The BCM47755 from Broadcom is a single-chip device that combines location awareness capabilities with the typical functions of a sensor hub. The combination provides synergistic benefits that cannot be achieved with multiple ICs, such as low power consumption, higher accuracy, reduced footprint and a smaller BOM.
Download Datasheet | Product Details
RF Variable Attenuator
31.5 dB MMIC Digital Attenuators from 0.1 to 40 GHz

RF Variable Attenuator  from API Technologies - Weinschel

The 4209 Series from API Technologies - Weinschel are MMIC digital attenuators that operate from 0.1 to 40 GHz. They have an attenuation range of 0 to 31.5 dB in 0.5 dB steps and can handle an input power of up to 28 dBm. These attenuators can be controlled using parallel (TTL compatible), I2C, SPI, UART, or USB interfaces making them ideal for ATE systems.
Download Datasheet | Product Details
RF Amplifier
5 W Solid State Power Amplifier from 10 kHz to 1000 MHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 5U1000 from AR RF/Microwave Instrumentation is a solid-state, self-contained, air-cooled, broadband amplifier that operates from 10 KHz to 1000 MHz. The amplifier provides an output power of more than 5 watts when used with a sweep generator and a gain of over 37 dB. This amplifier is designed for applications where instantaneous bandwidth, high gain, and linearity are required.
Download Datasheet | Product Details
RF Transceiver
Single RF Transceiver for 2G/3G/4G/5G Applications

RF Transceiver  from Analog Devices

The ADRV9009 is a highly integrated RF transceiver that supports all existing cellular standards and is tunable over a range of 75 MHz to 6 GHz. The 200 MHz bandwidth IC has integrated dual transmitters and receivers, integrated synthesizers, and digital signal processing functions. The device can be powered directly from 1.3 V and 1.8 V regulators and is controlled via a standard 4 wire serial port.
Download Datasheet | Product Details
Sponsored by PolyPhaser
 
 
 
Base Station Antenna
Dual Band (Twin) Base Station Antenna from 1710 to 2690 MHz

Base Station Antenna  from Rosenberger

The S-Wave EW/EW-65-18DV10 from Rosenberger is a Base Station Antenna that operates from 1710 to 2690 MHz. It is available in a twin configuration, so two antennas that cover the frequency range are integrated in to the panel. The antennas deliver a gain of up to 18 dBi and can handle an input power of 300 watts. The antenna panel measures 1250 x 295 x 115 mm is available with 7-16 DIN female connectors.
Download Datasheet | Product Details
RF Amplifier
Broadband L & S-Band LNA from 1 to 3 GHz

RF Amplifier  from NuWaves Engineering

The HILNA LS from NuWaves is a broadband L & S-band low noise amplifier that operates from 1 to 3 GHz. It delivers 50 dB of gain with a noise figure of less than 2 dB and OIP3 of +33 dBm. The HILNA LS is also usable from 500 MHz to 3.75 GHz with 40 dB of gain. The amplifier requires a supply voltage of 5 to 15 V.
Download Datasheet | Product Details
90 Degree Hybrid Coupler
100 W, 90 Degree Hybrid Coupler from 1 to 8 GHz

90 Degree Hybrid Coupler  from Werlatone Inc

The QH10828 from Werlatone is a 90 Degree Surface Mount Hybrid Coupler that operates from 1 to 8 GHz. It can handle up to 100 watts of CW power, has an insertion loss of under 0.9 dB, isolation of over 17 dB and a VSWR of 1.40:1. This 3 dB surface mount coupler has a phase balance of +/- 5 degrees and amplitude balance of +/- 0.7 dB.
Download Datasheet | Product Details
DC Block
Inner-Outer DC Block from 400 to 4000 MHz

DC Block  from MECA

The 502-1B from MECA is an Inner/Outer DC block that operates from 0.4 GHz to 4 GHz. It has an insertion loss of 0.5, a VSWR of 1.25:1 and can handle a power of up to 100 W. It is ideal for eliminating unwanted DC voltages or surges to tower top amplifiers and sensitive lab equipment. The 502-1B has brass nickel-plated connectors and is available in BNC configuration.
Download Datasheet | Product Details
RF Amplifier
3.4 to 3.6 GHz Hybrid GaN PA for 5G Massive MIMO Applications

RF Amplifier  from RFHIC

The RTH343610X is a GaN hybrid power amplifier module that operates from 3400 to 3600 MHz. It has been designed for 5G Massive MIMO systems, small cells, base station and low power remote radio head applications. This fully matched 2-staged Doherty GaN power amplifier module can deliver up to 10 Watts of power with a gain of 28.5 dB and an efficiency of 42%. It is available in a 15.8 x 10.8 x 4.2 mm surface mount package which provides excellent thermal dissipation.
Download Datasheet | Product Details
RF Transistor
35 W, 9 to 11 GHz GaN MMIC HEMT for Radar & CW Applications

RF Transistor  from Wolfspeed, A Cree Company

The CMPA901A035F from Wolfspeed is an X-band GaN on SiC HEMT transistor that operates from 9 to 11 GHz. It provides an output power up to 35 W with a small signal gain of 31 dB and power gain of over 22.7 dB. It has an efficiency of 35% and requires a 28 V power supply. It is ideal for Military Radar, Marine Radar, Weather Radar, and Medical applications.
Download Datasheet | Product Details
Block Up Converter
1000W X-Band GaN SSPA/BUC for Military Applications

Block Up Converter  from Advantech Wireless

The Taurus-Line X-Band 1000W from Advantech Wireless is an X-Band GaN BUC/SSPA that upconverts an input frequency from 950-1450 MHz to 7.9-8.4 GHz. It delivers an output power of 1000 watts with a gain of more than 70 dB. This BUC is perfectly suited for harsh environments and is both designed and manufactured to meet stringent military requirements.
Download Datasheet | Product Details
RF Variable Attenuator
DC to 2500 MHz Dual Rotary Attenuator

RF Variable Attenuator  from JFW Industries

The 50DR-046 from JFW Industries is a Dual Rotary Attenuator that operates from DC to 2500 MHz. This manual step attenuator has an attenuation range from 0 to 50 dB which can be adjusted in 1 dB steps using a small knob and 10 dB steps using the larger knob. It can handle up to 2 watts of power and is available with BNC, N or SMA connectors.
Download Datasheet | Product Details
RF Switch
High Power SPDT Switch for 28 GHz, 37 GHz and 39 GHz 5G Applications

RF Switch  from MACOM

The MASW-011098 is a high power SPDT PIN switch that operates from 26 to 40 GHz. The switch can handle up to 7 watts of power while maintaining low insertion loss and high isolation. Its frequency range makes it ideal for 5G Applications in the 28 GHz, 37 GHz and 39 GHz bands. It is available in a SMT 5 x 5 mm laminate package.
Download Datasheet | Product Details
RFID Reader IC
RAIN RFID UHF Reader Module with Four Antenna Ports

RFID Reader IC  from Impinj

The Indy RS2000 is a RAIN RFID UHF reader module that has a receiver sensitivity of -74 dBm and provides output power from 10 to 31.5 dBm. It has four antenna ports that enable a diverse range of fixed and mobile readers for inventory management, asset tracking, logistics, and industrial automation. The module is available in a 38 x 52 x 4 mm package and has a 10 meters read range.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We have created a series of 3 newsletters that cover the most popular products on everything RF in 2019. This newsletter is Part 2. Click here to see Part 1.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]