1. everything RF
  2. RF Newsletters
more
PREV 29 Jan, 2020 NEXT

New RF and Microwave Products this Week

29 Jan, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 29 Jan, 2020
 
Sponsored by Rohde & Schwarz
 
 
 
New RF & Microwave Products this Week
RF Transistor
2000 W LDMOS Power Transistor from 1.8 to 400 MHz

RF Transistor  from Ampleon

The ART2K0FE from Ampleon is an LDMOS Power Transistor that operates from 1.8 to 400 MHz. It provides an output power of 2000 Watts with a power gain of 27 dB and a drain efficiency of 78%. It is ideal for use in plasma generators, MRI systems, CO2 lasers, radio and VHF TV broadcast transmitters, radars and HF communication applications.
Download Datasheet | Product Details
RF Amplifier
GaN Power Amplifier MMIC from 7.75 to 12.25 GHz

RF Amplifier  from AMCOM Communications

The AM07512041WN-SN-R from Amcom Communications is a GaN Power Amplifier MMIC that operates from 7.75 to 12.25 GHz. It provides a P1dB of 37.5 dBm with a small signal gain of over 22 dB. It is ideal for instrumentation, commercial telecom transmission equipment, and fixed microwave backhaul applications.
Download Datasheet | Product Details
Vector Network Analyzer
1-Port Modular Vector Network Analyzers from 1 MHz to 8/20/43.5 GHz

Vector Network Analyzer  from Anritsu

The ShockLine MS46131A series from Anritsu are modular 1-Port Vector Network Analyzers that operate from 1 MHz to 8/20/43.5 GHz.These PC-controlled VNAs are ideally suited for 1-port RF and microwave applications in engineering, manufacturing, and education. The VNA models have fast sweep speed times and excellent corrected directivity (>42 dB).
Download Datasheet | Product Details
Vector Network Analyzer
Vector Network Analyzer from 10 MHz to 1.5 GHz

Vector Network Analyzer  from Teledyne LeCroy

TheT3VNA1500 from Teledyne LeCroy is a Vector Network Analyzer (VNA) that operates from 10 MHz to 1.5 GHz. This VNA has a resolution bandwidth from 1 Hz to 1 MHz and an amplitude accuracy of 1.2 dB. The analyzer has a phase noise of -98 dBc/Hz @10 kHz offset and provides a displayed average noise level (DANL) of -156 dBm/Hz.
Download Datasheet | Product Details
RF Spectrum Analyzer
Handheld Spectrum Analyzer from 9 kHz to 6 GHz

RF Spectrum Analyzer  from Bird

The SH-60S-TC from Bird is a compact hand-held spectrum analyzer that operates from 9 kHz to 6 GHz. It is part of the Signal Hawk Series of analyzers from Bird. The user interface of the analyzer has been built on Android making it easy to use. The analyzer has a resolution bandwidth of up to 5 MHz with a sweep time of 1.1 ms.
Download Datasheet | Product Details
RF Module
Dual-Band 4x4 MU-MIMO 802.11ac Wave 2 Module for Access Points

RF Module  from Compex Systems

The WLE1216VX from Compex is a dual-band 4x4 MU-MIMO 802.11ac wave 2 module built on Qualcomm's Atheros QCA9984 chipset. This module provides 20 dBm of output power at 2.4 GHz and 19 dBm of power at 5 GHz (per chain). It uses multi-user beamforming technology to provide data rates of up to 1733 Mbps.
Download Datasheet | Product Details
Sponsored by Rohde & Schwarz
Rohde & Schwarz
The next generation of 5G NR test solutions - R&S®CMX Communication tester series
Testing 5G NR products requires innovative test and measurement approaches. New technologies such as massive MIMO, bandwidths and data rates substantially higher than in 4G and the use of mmWave make over-the-air measurements compulsory. Learn more about 5G testing and discover the R&S®CMX series. Click here to learn more.
 
Directional Coupler
10 dB Directional Coupler from 2 to 18 GHz

Directional Coupler  from Mesa Microwave

The MMC-DC-20180-10 from MESA Microwave is a Directional Coupler that operates from 2 to 18 GHz. This 10 dB coupler has a directivity of over 15 dB and an insertion loss of less than 1.1 dB. It can handle up to 50 watts of average power, 1kW of peak power and has a VSWR of 1.5:1.
Download Datasheet | Product Details
Limiter
RF Signal Limiters from 0.02 to 40 GHz

Limiter  from Fairview Microwave

The High Power Signal Limiters from Fairview Microwave operate from 0.02 GHz to 40 GHz. These broadband limiters provide low leakage power circuit protection from 10 to 18 dBm. They also exhibit a fast recovery time of 10 to 100 ns and high CW power handling up to 5 W and peak power handling up to 200 W.
Download Datasheet | Product Details
RF Amplifier
GaAs Low Noise Amplifier from 16 to 31 GHz

RF Amplifier  from arQana Technologies

The ALA6701 from arQana Technologies is a GaAs Low Noise Amplifier that operates from 16 to 31 GHz. This MMIC provides an output power of 10 dBm (P1dB) with a gain of over 27 dB, and a noise figure of less than 2 dB. It is ideal for AESA-Radars, radios, VSAT, military, space and repeaters/boosters/DAS applications.
Download Datasheet | Product Details
SATCOM Amplifier System
250 W TWT Power Amplifier for V-Band Applications

SATCOM Amplifier System  from Comtech Xicom Technology

The XTD-250QV from Comtech Xicom Technology is a V-Band Antenna Mount High Power TWT Amplifier that operates from 47.2 to 51.4 GHz. The amplifier provides up to 250 Watts of peak power with a gain of over 60 dB. A pre-distortion linearizer is also included to optimize linear power at the HPA flange.
Download Datasheet | Product Details
RFID Tag
UHF RFID Tag for Global Use

RFID Tag  from Invengo

The XCTF-8038-C09-FSI from Invengo is an EPC Class 1 Gen 2, ISO 18000-63 RFID Tag that operates from 860 to 960 MHz. The tag is based on the Impinj Monza 4U IC and is designed to enable end-users to reach and sustain high levels of performance in all global RAIN RFID (UHF) frequency regions. The tag is suitable for industry and supply chain management applications.
Download Datasheet | Product Details
RF Surge Protector
N-Type Coaxial RF Surge Protector from DC to 6 GHz

RF Surge Protector  from PolyPhaser

The GT-NFM-AL from PolyPhaser is a coaxial RF Surge Protector that operates from DC to 6 GHz. This N-Type F/M Bulkhead device incorporates gas discharge tube technology with a VSWR of less than 1.4:1 and can handle surge currents of up to 20 kA. It is ideal for use in land mobile radios, WiFi, and GPS applications.
Download Datasheet | Product Details
Sponsored by Rohde & Schwarz
 
 
 
Block Up Converter
Ku-Band VSAT Block-Up Converter for SATCOM Applications

Block Up Converter  from Agilis

The ALB128 Series from Agilis is a Ku-Band VSAT Block-Up Converter for satellite communication. The BUC upconverts an input frequency from 950 - 1700 MHz to an output frequency from 12.75 - 14.80 GHz. It delivers 8 W of output power with a gain of 64 to 72 dB. It can be used for both data and voice communication operating in different modulation formats.
Download Datasheet | Product Details
Waveguide Bend
90 Degree Waveguide Bends from 90 to 220 GHz

Waveguide Bend  from Pasternack Enterprises Inc

The PEW Series from Pasternack are Waveguide Bends that operate from 90 to 220 GHz and are available in 3 waveguide bands (90-140/110-170/140-220 GHz). They include E-Plane and H-Plane configurations with a bend angle of 90 degrees. These waveguide bends have a low VSWR of 1.15:1.
Download Datasheet | Product Details
Antenna
Shark Fin Antenna for LTE, GNSS, and WiFi Applications

Antenna  from Amphenol Procom

The ProFin Plus from Amphenol Procom is a 2x2 MIMO LTE and WiFi multi-purpose shark fin antenna for GNSS, GPS, 2G/3G/4G/5G and dual WiFi 2.4/5.8 GHz applications. This vertically polarized antenna delivers a gain of 7 dBi and can handle up to 25 W of input power for 4G/5G/ WiFi applications. This antenna also supports an external whip antenna.
Download Datasheet | Product Details
Antenna
LTE CAT-M1 Antenna from 698-868 MHz/1850-2690 MHz

Antenna  from Raltron

The RST-TA4-TB3-13380063-4-X-001 from Raltron is a magnet mount antenna for LTE CAT-M1 applications from 698-868 MHz and 1850-2690 MHz. This linearly polarized antenna provides a gain of 2 dBi and has a VSWR of 2:1. The antenna measures 133.8 (L) x 6.3 (D) mm and is available with RG174 cable and MCX connector.
Download Datasheet | Product Details
Power Divider
30 W, 3 Way Power Divider from 698 to 2700 MHz

Power Divider  from VidaRF

The VPD-0627A3 is a 3-way RF power divider that operates from 0.698 to 2.7 GHz for all wireless applications from cellular through UMTS. It can handle up to 30 Watts of power, has an insertion loss of less than 0.9 dB and isolation over 20 dB. The power divider is available with SMA, QMA or alternative connector options.
Download Datasheet | Product Details
90 Degree Hybrid Coupler
90 Degree Hybrid Coupler from 2 to 4 GHz

90 Degree Hybrid Coupler  from Anaren Inc

The XMC0204F1-03G from Anaren is a 90º Hybrid Coupler that operates from 2 to 4 GHz. This low profile, high-performance 3 dB hybrid coupler has an insertion loss of less than 0.30 dB, isolation of over 17 dB and can handle an average CW power of 40 Watts.
Download Datasheet | Product Details
RF Tapper
RF Tappers from 130 to 1000 MHz for UWB Public Safety

RF Tapper  from Comprod

The 26-13-0X-NF Series from Comprod are RF Tappers for UWB Public Safety applications that operate from 130 to 1000 MHz. They can handle an average power of up to 300 W and peak power of up to 1kW. These 50-ohms tappers feature an airline design and have an insertion loss of less than 1.65 dB.
Download Datasheet | Product Details
RF Mixer
Image-Reject Mixer from 0.6 to 2.2 GHz

RF Mixer  from Polyphase Microwave

The IRM0622B from Polyphase Microwave is an Image-Reject mixer with an RF/LO frequency from 0.6 to 2.2 GHz and IF frequency from 10 to 90 MHz. It achieves up to 35 dB of image rejection and delivers high LO-RF isolation of 60 dB. The mixer is available in a module with SMA female connectors and is ideal for high-performance microwave down converters and receivers.
Download Datasheet | Product Details
RF & Microwave Circulator
Surface Mount Circulator from 2.49 to 2.69 GHz

RF & Microwave Circulator  from Skyworks Solutions

The SKYFR-001803 from Skyworks is a single-junction circulator that operates from 2.49 to 2.69 GHz. It has an insertion loss of less than 0.33 dB, isolation of more than 20 dB, and a return loss of more than 22 dB. The circulator can handle an average input power of up to 20 W and a peak power of 160 watts.
Download Datasheet | Product Details
RF Mixer
2 to 14 GHz Up or Downconverting Mixer

RF Mixer  from Lotus Communication Systems

The MIX2G14G500M6G from Lotus Communication is an active upconverting or downconverting mixer with an RF/LO frequency from 2 to 14 GHz and IF frequency from 0.5 to 6 GHz. It has a conversion loss of 8 dB and an IP3 from 22.8 to 28.2 dBm. It requires 3.3 volts of power supply and is available in a module with SMA (F) connectors.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, articles, white papers, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]