1. everything RF
  2. RF Newsletters
more
PREV 20 August, 2014 NEXT

New RF & Microwave Products this Week

20 August, 2014 - everything RF Newsletter
 
everything RF
Date: 20 August, 2014
 
New Waveguide Section
 
 
 
New RF & Microwave Products this Week
Front End Module
5 GHz WLAN Front End Module for PC Cards and Routers

Front End Module from Skyworks

The SKY85710-11 is a 5 GHz WLAN Front End Module that has been developed for PC Cards and routers. This module has been used by NETGEAR in their Night Hawk routers. The FEM consists of a SPDT switch, low noise amplifier and a power amplifier for high power 802.11 ac applications.
 
Download Datasheet | Product Details
 
Front End Module
2 GHz WLAN Front End Module for PC Cards and Routers

Front End Module from Skyworks

The SKY85309-11 is a 2 GHz WLAN Front End Module that has been developed for PC Cards and routers. This module has been used by NETGEAR in their Night Hawk routers. The FEM consists of a SPDT switch, low noise amplifier and a power amplifier for high power 802.11 ac applications.
 
Download Datasheet | Product Details
 
Front End Module
ISM Band 915 MHz Transmit / Receive Module - PA, LNA with SP3T Switch

Front End Module from RFMD

The RFFM6903 is a Front End Module designed for Smart Energy, Advanced Metering Infrastructure, portable battery-powered equipment, and general 868 / 915MHz ISM band systems. It integrates a 30.5 dBm power amplifier with a harmonic filter in the transmit path, Tx path bypass mode with harmonic filter, and a LNA with bypass mode in the receive path.
 
Download Datasheet | Product Details
 
RF Amplifier
14 to 18 GHz GaN Power Amplifier Die

RF Amplifier from Custom MMIC

The CMD216 from Custom MMIC is a 14 to 18 GHz GaN power amplifier die that has been developed for Ku Band, radar, military, space and test instrumentation. It delivers 16 dB of gain across the entire 14 to 18 GHz bandwidth, an output P1dB of 37 dBm, and saturated output power of 38 dBm.
 
Download Datasheet | Product Details
 
Band Pass Filter
C Band and X Band Filters with a Low Loss and High Rejection

Band Pass Filter from Networks International Corporation

The CV Series of Band Pass Filters from NIC have been designed for C Band and X Band applications. They can have a center frequency from 5 GHz to 15 GHz with a bandwidth from 1 to 10%. The filters have a 6-pole Chebyshev response and are available in a package with SMA Female connectors.
 
Download Datasheet | Product Details
 
RF Cable Assembly
26.5 GHz Low Loss Ultra Flexible Cable Assemblies with Good Phase Stability

RF Cable Assembly from HASCO Components

The HSFL42 Series are 26.5 GHz low loss flexible cable assemblies with good phase stability. They are RoHS compliant, have a low loss and VSWR. The cables have a phase stability vs flexure of ± 3° and amplitude stability of less than 0.3 dB at 26.5 GHz. The assemblies are available in various lengths with SMA Male and Female stainless steel connectors.
 
Download Datasheet | Product Details
 
RF Connector
6 GHz SMB Connectors Available in Multiple Colors and Rotate 360 Degrees

RF Connector from MOLEX

The FAKARA II and FAKRA SMB Connectors from MOLEX that operate up to 6 GHz. They have a secondary locking latch that enables easy cable routing between antennas and multi-media units. They can be used for SDARS, Cellular, GPS navigation, satellite radio and key-less entry applications.
 
Download Datasheet | Product Details
 
RF Detector
600 MHz to 15 GHz RF Power Detector with Ultra Fast Response Time

RF Detector from Linear Technology

The LTC5564 is a fast RF Power Detector with a built in comparator that operates from 600 MHz to 15 GHz. This temperature compensated Schottky RF Peak Detector has a wide power range from -24 dBm to 16 dBm. It has an ultra fast response time of 7 ns and a 75 MHz demodulation bandwidth. The detector is available in a 16 lead 3 x 3 mm QFN package.
 
Download Datasheet | Product Details
 
Power Divider
30 Watts, 2 Way Power Divider from 698 to 2700 MHz

Power Divider from VidaRF

The VPD-0627A2 is a 2 way rf power divider that operates from 0.698 to 2.7 GHz for all wireless applications from cellular through UMTS. It can handle up to 30 Watts of power, has an insertion loss of less than 0.6 dB and an isolation over 20 dB. The power divider is available with SMA, QMA or alternative connector options.
 
Download Datasheet | Product Details
 
RF Amplifier
2620 to 2690 MHz GaN Power Amplifier for LTE and DPD Infrastructure Applications

RF Amplifier from RFHIC

The RTP26070-20 from RFHIC is a GaN Power Amplifier that operates from 2620 to 2690 MHz. It has been developed for LTE and DPD infrastructure applications and provides an output power of 48.5 dBm. The amplifier has an efficiency of 40%.
 
Download Datasheet | Product Details
 
RF Amplifier
0.8 to 2.0 GHz, 500 Watts, Linear Power RF Amplifier

RF Amplifier from Ophir RF

The 5136A from Ophir RF is a 500 W broadband amplifier system which operates from 800 MHz to 2 GHz. It provides 300 W of power (P1dB) with a flatness of +/- 2.5 dB and has a gain of 58 dB. It has harmonics of -20 dBc, spurious of -60 dBc and a VSWR of 2:1. The system operates on 180 to 264 V of AC Voltage and consumes 3000 W of AC power.
 
Download Datasheet | Product Details
 
RF Amplifier
2 to 20 GHz Amplifier in a Laser Sealed Housing Optimized for Environmental Protection

RF Amplifier from API Technologies

The BXHF1084 is an amplifier from API Technologies that operates from 2 to 20 GHz. It has a high gain of 26 dB and is available in a laser sealed housing which is optimized for environmental protection. The amplifier can also be ordered in a screened MIL-STD-883 (Model SXHF1084).
 
Download Datasheet | Product Details
 
Coaxial Termination
0.698 to 2.7 GHz Low PIM 50 Watt Termination

Coaxial Termination from MECA

The LPT50 Series are low PIM 50 Watt Terminations that operate from 0.698 to 2.7 GHz. They have a PIM of less than -155 dBc and a VSWR of 1.1:1. The terminations are available with a number of connector options - 7/16 DIN, Type N & 4.1/9.5 (mini-DIN) connectors.
 
Download Datasheet | Product Details
 
Coaxial Termination
DC to 6 GHz Coaxial Terminations Handle up to 500 Watts

Coaxial Termination from Aeroflex - Inmet

The Series PCX are high power coaxial terminations from Aeroflex / Inmet that operate from DC to 6 GHz. The terminations can handle power levels up to 500 watts and are available with SMA or N Type Male/Female connectors. They are available in a number of frequency and power configurations.
 
Download Datasheet | Product Details
 
GPS/GNSS Module
High Performance Low Power, Compact GNSS Module for Mobile Devices

GPS/GNSS Module from Maestro Wireless

The A5100-A from Maestro Wireless is a compact, sensitive GNSS module that is based on CSR’s SiRFstarV platform. The module supports GLONASS, GPS, QZSS and SBAS measurements simultaneous. The A5100-A has been developed for the GPS L1 Band (1575 MHz) with tracking sensitivity of -165 dBm and acquisition sensitivity of -147 dBm.
 
Download Datasheet | Product Details
 
New Waveguide Section
Waveguide Components
RF & Microwave Waveguides on everything RF
Find & Compare Waveguide Components using the parametric search tools on everything RF. There are over 6000 Products listed from more than 20 Manufacturers in 10 Categories. Download datasheets, get quotations and discovery new products based on your requirement.
 
 
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.