PREV 26 Feb, 2020 NEXT

New RF and Microwave Products this Week

26 Feb, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 26 Feb, 2020
 
Sponsored by IMS 2020
 
 
 
New RF & Microwave Products this Week
RF Module
Dual-Band Wi-Fi 6E/Bluetooth 5 Combo Chip

RF Module  from Broadcom

The BCM4389 from Broadcom is a Wi-Fi 6E and Bluetooth 5.0 Combo Chip designed for low-power mobile devices and AR/VR devices. Wi-Fi 6E extends the Wi-Fi 6 standard to support the soon-to-be-operational 6 GHz band with wider 160 MHz channel bandwidths that double Wi-Fi speeds and cut latency in half compared to Wi-Fi 5.
Download Datasheet | Product Details
RF Amplifier
Wi-Fi Tx/Rx Booster Amplifier from 5150 to 5925 MHz

RF Amplifier  from Becker Nachrichtentechnik GmbH

The AMP51505925-TRX from Becker Nachrichtentechnik GmbH is a Wi-Fi Tx/Rx Booster Amplifier for the 5 GHz Wi-Fi band from 5150 to 5925 MHz. This amplifier consists of a high linearity Tx power amplifier and a low noise Rx amplifier path. The default setting of the internal Tx/Rx switch is Rx (LNA path). The amplifier requires a supply voltage of 12 to 28 V and consumes 4.8 watts of power in Tx mode.
Download Datasheet | Product Details
RF Amplifier
200 W GaN-Based Pulsed Amplifier from 9.3 to 9.5 GHz

RF Amplifier  from RFHIC

The RRM9395200-56A from RFHIC is a GaN-Based Pulsed Amplifier that operates from 9.3 to 9.5 GHz. This amplifier provides a pulsed output power of 200 watts (100µs, 10% duty cycle) with a power gain of over 55 dB and has a PAE of 20%. It requires a supply voltage of 50 volts and is available in a module with SMA connectors. This amplifier is ideal for use in marine and weather radar systems.
Download Datasheet | Product Details
Power Divider
2-Way Ku-Band Isolated Splitters for Space Applications

Power Divider  from Smiths Interconnect

The SpaceNXT MWC Series from Smiths Interconnect are 2-Way Ku-Band Isolated Splitters that operate from 10.7 to 12.8 GHz. This MWC Series is ideally designed for providing the commercial satellite uplink band (downlink also available) with specific attention to achieving phase-stable output amplitude characteristics.
Download Datasheet | Product Details
RF Amplifier
X-Band Waveguide Low Noise SATCOM Amplifier from 7.1 to 8.5 GHz

RF Amplifier  from AmpliTech

The APTW5-07100850-40K10-WR112-D6 from AmpliTech is an X-Band Waveguide Low Noise Amplifier that operates from 7.1 to 8.5 GHz. It provides a P1dB of 14 dBm with a gain of over 50 dB and noise temperature of 40 K. The device is ideal for use in SATCOM applications, radars, weather and speed monitoring devices, and civil applications, such as traffic control and law enforcement.
Download Datasheet | Product Details
Cellular IoT Module
Multi-Band CAT-M and NB-IoT Module for Asset Tracking and Wearables

Cellular IoT Module  from SIMCom

The SIM7090G from SIMCom is a Multi-Band CAT-M and NB-IoT Module. It is ideal for low power, low latency and low throughput applications like smart metering, asset tracking, wearable products, remote control, smart homes, smart cities, smart agriculture and other Internet of Things industries. It provides 21 dBm of output power and requires a supply voltage of 2.7 to 4.8 V.
Download Datasheet | Product Details
RF High Pass Filter
18 GHz Suspended Stripline High Pass Filter

RF High Pass Filter  from Anatech Electronics

The AE18000SSH6580 from Anatech is a suspended stripline high pass filter with a cutoff frequency of 18 GHz and a passband from 18 to 40 GHz. The filter has an insertion loss of less than 2 dB with attenuation of more than 50 dB at 15 GHz. It can handle an input power of up to 15 dBm. The high pass filter is available in a module that measures 12.7 x 12.7 x 10.0 mm with SMA female connectors.
Download Datasheet | Product Details
Diplexer
Diplexer from 617-2180/2300-2700 MHz for Small Cell Applications

Diplexer  from Microlab

The BK-693E from Microlab is a Diplexer with a low passband from 617 to 2180 MHz and a high passband from 2300 to 2700 MHz. It has a low-PIM of -161 dBc, insertion loss of less than 0.5 dB and an isolation of over 60 dB. The diplexer can handle up to 200 watts of input power. It is ideal for use in small cells, coaxial distributed in-building cellular networks or D-RAN applications.
Download Datasheet | Product Details
Sponsored by IMS 2020
IMS 2020
IEEE MTT International Microwave Symposium (IMS)
The IEEE MTT International Microwave Symposium (IMS) is the premier annual international meeting for technologists involved in all aspects of microwave theory and practice. It consists of a full week of events, including technical paper presentations, workshops, and tutorials, as well as numerous social events and networking opportunities. IMS 2020 will be held from 21-26 June 2020 in Los Angeles, California. Click here to learn more.
 
RF Variable Attenuator
100 dB Continuously Variable Attenuator / Directional Coupler from 960 MHz to 1.215 GHz

RF Variable Attenuator  from ARRA Inc.

The 2-3954-100 from ARRA is a continuously variable attenuator/directional coupler that operates from 960 MHz to 1.215 GHz. This variable attenuator/coupler has a unique configuration - it consists of a directional coupler with a mainline insertion loss of 1.5 dB and has a variable attenuator to control the output of the coupled line.
Download Datasheet | Product Details
Antenna
5G-NR/4G LTE/3G/2G Ultra Wideband Waterproof Antenna

Antenna  from 2J Antennas

The 2JW1483 from 2J Antennas is a 5G-NR Connector Mount Antenna that operates in three bands (617-960 / 1427-2690 / 3300-3800 MHz). Supporting 5G, 4G, 3G, and 2G technologies, this antenna provides a peak gain of over 0.4 dBi and can handle up to 25 watts of input power. It supports 5G-NR, LTE, FirstNet, CBRS, LPWA, CAT-x, CAT-Mx, CAT-NBx, and NB-IoT standards.
Download Datasheet | Product Details
Antenna
Multi-Band Miniature Chip Antenna for 5G and IoT Applications

Antenna  from Fractus Antennas

The ONE mXTEND (NN02-201) from Fractus Antennas is a Multi-Band Miniature Chip Antenna that operates from 824 to 5000 MHz, covering 2G, 3G, 4G, and 5G frequency bands. This ultra-compact antenna (the size of a grain of rice) has been specifically designed for 5G and cellular IoT applications as it covers multiple frequency bands.
Download Datasheet | Product Details
Vector Network Analyzer
2-Port PXI Based Vector Network Analyzer from 300 kHz to 9 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The PXIe-S5090 is a metrology-grade VNA that has been developed for the National Instruments PXI platform. This high-performance vector network analyzer operates from 300 kHz to 9 GHz and allows testing of two-port devices from the bench to the production floor in a compact, modular form factor. It can be used to measure all four S parameters (S11, S21, S12, and S22).
Download Datasheet | Product Details
RF Spectrum Analyzer
Handheld Spectrum Analyzer for 5G-NR Applications

RF Spectrum Analyzer  from Deviser

The E8900A from Deviser is a Handheld Spectrum Analyzer that operates from 9 kHz to 9 GHz. It performs standard spectrum analysis up to 9 GHz and 5G NR analysis up to 6 GHz. The analyzer has an IF span of 100 MHz and can conduct over 3 Full Sweep scans/second. It also has a range of digital and analog test modes designed to provide a comprehensive picture of the signal environment.
Download Datasheet | Product Details
RF Amplifier
30 W Hybrid Power Amplifier from 1 to 6 GHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 30HM1G6AB-45 from AR RF/Microwave Instrumentation is a compact hybrid power amplifier module that operates from 1 to 6 GHz. When used with a sweep generator, it provides an output power of more than 30 watts with a gain of 48 dB and excellent flatness, noise figure and intermodulation distortion. This power amplifier can be used for both military and commercial applications.
Download Datasheet | Product Details
GNSS System on Chip
GNSS SoC for Asset Tracking and Fitness Applications

GNSS System on Chip  from Qualcomm

The SiRFstar V 5e B02 from Qualcomm is GNSS SoC that is optimized to enable highly accurate location positioning for devices including mobile phones, cameras, and health & fitness products. It supports fully-concurrent GPS, GLONASS, COMPASS, QZSS, Beidou, SBAS and, Galileo constellations.
Download Datasheet | Product Details
Wireless SoC
Wireless SOCs for ZigBee Green Power IoT Applications

Wireless SoC  from Silicon Labs

The EFR32MG22 Series from Silicon Labs are 2.4 GHz Wireless SOCs optimized for ZigBee Green Power IoT applications. These modules are based on Silicon Labs' Wireless Gecko Series 2 platform and are an ideal choice for Zigbee devices powered by coin cell batteries or energy-harvesting sources. Target applications include smart home sensors, lighting controls, and building and industrial automation.
Download Datasheet | Product Details
Sponsored by IMS 2020
 
 
 
Wireless SoC
Bluetooth 5.0 Wireless SoC for IoT, Sensing and Audio Applications

Wireless SoC  from Cypress Semiconductor

The CYW20721 from Cypress is a Baseband Processor SoC with an integrated 2.4 GHz transceiver. It has been developed for Bluetooth 5.0 and supports basic rate (BR), enhanced data rate (EDR), BLE, and adaptive frequency hopping (AFH). The low power SoC is intended for use in audio, IoT, sensors (medical, home, security, and so forth), and human interface device (HID) applications.
Download Datasheet | Product Details
RF Amplifier
DC to 10 GHz Gain Block for Backhaul and Instrumentation Applications

RF Amplifier  from Guerrilla RF

The GRF3016 from Guerrilla RF is a Broadband Gain Block that operates from DC to 10 GHz. This device provides a P1dB of 17 dBm with a gain of 13.5 dB and a noise figure of 5.2 dB while operating at 5 GHz. The resistively biased device uses an external resistor in series with VCC to set a nominal current of 80 mA.
Download Datasheet | Product Details
RF Transistor
2 KW LDMOS Power Transistor from 1.8 to 400 MHz

RF Transistor  from Ampleon

The ART2K0PE from Ampleon is an LDMOS Power Transistor that operates from 1.8 to 400 MHz. It provides a P1dB of 2000 watts with a power gain of 28.5 dB and a drain efficiency of 73%. The transistor has integrated dual-sided ESD protection which enables class C operation and complete switch-off of the transistor. It requires a 65 V power supply and is available in an over-molded plastic earless flanged package.
Download Datasheet | Product Details
OCXO
10 to 40 MHz OCXOs for Instrumentation and SATCOM Applications

OCXO  from MtronPTI

The XO9014 Series from MtronPTI are OCXOs with an oscillation frequency from 10 to 40 MHz. They provide a phase noise of -125 dBc/Hz at 100 Hz offset and have temperature stability of less than +/-10 ppb while operating from -20°C to +85°C. These IEEE 1588 Compliant oscillators require a supply voltage of 3.3 V and provide an LVCMOS waveform at the output.
Download Datasheet | Product Details
Base Station Antenna
20-Port Multi-Beam Base-Station Antenna for LTE Cell Site Deployment

Base Station Antenna  from MatSing

The MS-MBA-3.2-H4-L4 from MatSing is a Multi-Beam Base-Station (MBA) Antenna that utilizes a patented spherical lens design with three isolated high-frequency (1710 - 2690 MHz) cross-polarized beams and two isolated low-frequency (698 - 960 MHz) cross-polarized beams. Each beam is made of two independent antennas and has 4 ports.
Download Datasheet | Product Details
Base Station Antenna
4-Port OMNI Antenna from 2.5 to 2.7 GHz

Base Station Antenna  from Radio Waves

The POMNQX-2.7 from Radiowaves is a 4-port Omni-directional Antenna that operates from 2.5 to 2.7 GHz. It provides a gain of up to 6 dBi and has a 45-degree slant polarization. The antenna can handle up to 100 watts of power and has a port to port isolation of 23 dB. The antenna measures 2.33 ft. and is available with 4.3-­10 female connectors.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest RF & Microwave news, information on new product releases, upcoming events, articles, white papers and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]