New products this week. View it in your browser
New RF & Microwave Products this Week |
|
|
|
|
|
32 GHz Waveguide Band Pass Filter |
Band Pass Filter
from Anatech Electronics
|
The AE32000WB11560 from Anatech Electronics is a Waveguide Band Pass Filter with a center frequency of 32 GHz and bandwidth of 0.5 GHz. The filter has an insertion loss of less than 2 dB and more than 50 dB of rejection above and below the passband. This through-hole mounted bandpass filter can handle up to 10 watts of power and is available in a module that measures 80 x 15 x 8.5 mm with 2.92 mm female connectors. |
Download Datasheet |
Product Details
|
|
|
|
Sponsored by IMS 2020 |
IEEE MTT International Microwave Symposium (IMS) |
The IEEE MTT International Microwave Symposium (IMS) is the premier annual international meeting for technologists involved in all aspects of microwave theory and practice. It consists of a full week of events, including technical paper presentations, workshops, and tutorials, as well as numerous social events and networking opportunities. IMS 2020 will be held from 21-26 June 2020 in Los Angeles, California. Click here to learn more. |
|
|
|
|
UHF RAIN RFID Inlay for Asset Tracking Applications |
RFID Tag
from Zebra
|
The ZBR4000 from Zebra is a UHF RAIN RFID Inlay that operates from 865 to 868 MHz (ETSI) and 902 to 928 MHz (FCC). It has a read range of up to 20 meters and can be read from almost any angle. This inlay has a read sensitivity of up to -23 dBm and a write sensitivity of up to -18 dBm. The inlay is based on NXP’s UCODE 8 chip and has an EPC memory of 128 bits and a TID memory of 96 bits (48 bit unique). |
Download Datasheet |
Product Details
|
|
|
|
|
60 MHz Low Phase Noise OCXO |
OCXO
from Dynamic Engineers
|
The OCXO5050AN-60MHz-A-V from Dynamic Engineers is a Low Phase Noise OCXO that operates at 60 MHz without internal multiplication. It has a phase noise of less than -160 dBc/ Hz @10 kHz and frequency stability of 50 ppb over a temperature range from 0 to 50 degrees Celsius. This OCXO provides a Sine waveform at the output while operating on a supply voltage of 12 V. |
Download Datasheet |
Product Details
|
|
|
|
|
GaAs Driver Amplifier MMIC from DC to 24 GHz |
RF Amplifier
from Eclipse MDI
|
The EMD1706QFN4 from Eclipse MDI is a GaAs Driver Amplifier MMIC that operates from DC to 24 GHz. This pHEMT amplifier provides a P1dB of up to 23 dBm with a gain of over 13 dB and has a noise figure of 6.5 dB. It requires a supply voltage of 8V and draws a current of 130mA. This RoHS-compliant device is available in a 4 mm QFN leadless package and is ideal for commercial and industrial applications. |
Download Datasheet |
Product Details
|
|
|
|
|
DC to 67 GHz Broadband Pick-off Tee |
Pick-off Tee
from HYPERLABS Inc.
|
The HL9468M is a Matched pair of Broadband Pick-off Tees that boasts low levels of insertion loss from DC to 67 GHz on the thru line and from DC to 55 GHz on the pick-off line. It can be used as a trigger source with minimum perturbation of the through signal path. The Pick-off tee has a thru insertion loss of 4 dB, a pick-off insertion loss of 10 dB, and can handle an input power of up to 30 dBm. |
Download Datasheet |
Product Details
|
|
|
|
|
100 nF Broadband Ceramic Capacitor |
RF Capacitor
from Passive Plus Inc
|
The 01005BB104MW6R3 from Passive Plus is a Broadband Ceramic Capacitor that can be used from 16 kHz to 40 GHz. It has a capacitance of 100 nF, a working voltage (WVDC) of 6.3 V, and an insertion loss of less than 1 dB. The dielectric can withstand a voltage of up to 250% of the working voltage for 5 seconds. This capacitor is 100% RoHS compliant and is available with TIN, Gold or Tin/Lead terminations. |
Download Datasheet |
Product Details
|
|
|
|
| About everything RF | everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new products, articles, white papers, interviews and much more. |
|
To unsubscribe please click here | [Sender_Name] [Sender_Address], [Sender_City], [Sender_State], [Sender_Zip] |
|