1. everything RF
  2. RF Newsletters
more
PREV 11 March, 2020 NEXT

New RF and Microwave Products this Week

11 March, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 11 March, 2020
 
Sponsored by Digi-Key
 
 
 
New RF and Microwave Products this Week
RF Spectrum Recording and Playback System
500 MHz to 18 GHz Multi-Channel Playback & Acquisition System for EW Applications

RF Spectrum Recording and Playback System  from Giga-tronics

The GT-COMPASS-18A from Giga-tronics is a Coherent Multi-Channel Playback Acquisition & Storage System (COMPASS) for Electronic Warfare applications with up to 4 coherent RF channels covering 500 MHz to 18 GHz. It supports any combination of upconversion from IF and down conversion to IF and has excellent spectral purity, phase noise, noise figure and high dynamic range.
Download Datasheet | Product Details
RF & Microwave Circulator
Surface Mount Circulator from 27.5 to 28.35 GHz

RF & Microwave Circulator  from MOLEX

The 0735910552 from Molex is a surface mount circulator that operates from 27.5 to 28.35 GHz. It has an insertion loss of less than 1 dB, isolation of more than 17 dB, and a return loss of 16 dB. The circulator can handle an input power of up to 4 W. It is available in a drop-in surface mount package.
Download Datasheet | Product Details
RF Transceiver
LoRa Transceiver Module with Integrated Low Power Wi-Fi and GNSS Scanner

RF Transceiver  from Semtech

The LR1110 from Semtech is an ultra-low power platform that integrates a long-range LoRa® transceiver, multi-constellation GNSS scanner and a passive Wi-Fi AP MAC address scanner targeting asset management applications. The low power high-sensitivity LoRa/(G)FSK Half-Duplex RF Transceiver supports worldwide ISM frequency bands from 150 to 960 MHz.
Download Datasheet | Product Details
RF Switch
6-Channel SPST Micro-Mechanical Switch from DC to 3 GHz

RF Switch  from Menlo Micro

The MM3130 device is a high power 6-channel SPST micro-mechanical switch offered in a 36 mm2 BGA package. It is a derivative of the MM3100, removing the internal SPI controller and providing direct Gate access for each of the six switches. The MM3130 can be used to replace multiple electro-mechanical relays or PIN diodes in a variety of end applications.
Download Datasheet | Product Details
Band Pass Filter
Band Pass Filter with Passband from 9998 to 10002 MHz

Band Pass Filter  from Wainwright Instruments

The WBWP5-9976-9998-10002-10024-50 from wainwright Instruments is a Band Pass Filter with a passband from 9998 to 10002 MHz. The device has an insertion loss of less than 4 dB and provides an attenuation of more than 50 dB. It can handle up to 100 watts of CW power and is available in a module that measures 135 x 32.2 x 21.6 mm with SMA/N/BNC type male or female connectors.
Download Datasheet | Product Details
Waveguide Isolator
Faraday Rotation Waveguide Isolator from 50 to 75 GHz

Waveguide Isolator  from Micro Harmonics

The FR148 from MicroHarmonics is a Faraday Rotation Isolator that operates from 50 to 75 GHz. It has an insertion loss of less than 1.5 dB and an isolation of over 19 dB. The device can handle an input power of up to 1.7 watts and has a VSWR of less than 1.4:1. This isolator has a WR-15 waveguide size interface.
Download Datasheet | Product Details
Sponsored by Digi-Key
Amphenol RF 18 GHz N-Type Connectors
Amphenol RF 18 GHz N-Type Connectors Available Now from Digi-Key
The 18 GHz N-Type connectors are an expansion of the popular N-Type product line and offer all the same features and benefits with an extended frequency range. These connectors are designed to offer excellent low PIM performance in a reliable medium-sized package. Click here to learn more.
 
RF Amplifier
W-Band Power Amplifier from 92 to 96 GHz

RF Amplifier  from QuinStar Technology Inc

The QPP-94043335-00 from QuinStar is a GaAs W-Band Solid State Power Amplifier that operates from 92 to 96 GHz in CW or variable pulsed modes. It provides a P1dB of 33 dBm with a gain of 35 dB. The millimetre-wave (MMW) amplifier has a rise and fall time of less than 25 ns and a duty cycle between 1 and 100%. Its dual-mode operation supports rigorous and dynamic testing protocols.
Download Datasheet | Product Details
RF Switch
120 W Reflective SPDT Switch from 6 to 18 GHz

RF Switch  from Planar Monolithics Industries

The P2T-6G18G-40-R-570-TFF-120WCW from PMI RF is a reflective SPDT switch that operates from 6 to 18 GHz. This switch has an insertion loss of 2.2 dB, isolation of 40 dB and can handle up to 120 Watts of CW Power. It has a VSWR of 1.50:1 and a switching speed of 1.25 usec. The switch has a Single TTL control interface and requires a 5 V/-70V Supply.
Download Datasheet | Product Details
Mechanical Phase Shifter
Motorized Phase Shifter from DC to 18 GHz

Mechanical Phase Shifter  from ARRA Inc.

The 9428A-28 from ARRA is a Motorized Phase Shifter that provides a phase shift of 60°/GHz from DC to 18 GHz. This phase shifter has an insertion loss of less than 1 dB and a minimum insertion delay of 0.85 ns. It can handle up to 100 watts of average power and 5 kW of Peak power. The 9428A-28 measuring 9 x 7.890 inches is available with SMA (F) or N-Type connectors.
Download Datasheet | Product Details
Frequency Synthesizer
12 GHz Fixed PLL Frequency Synthesizer

Frequency Synthesizer  from Z-COMM

The RFS12000C-LF from Z-COMM is a 12 GHz Fixed PLL Frequency Synthesizer that delivers up to 3 dBm of output power. It incorporates a 10 MHz TCXO ref oscillator, has a phase noise of -86 dBc/Hz at 10 kHz offset and a settling time of 1 ms. The synthesizer module requires a 3.3 V of power supply while drawing 15 mA of current for the PLL.
Download Datasheet | Product Details
Phase Noise Analyzer
10 MHz to 26 GHz Real-Time Phase Noise Analyzer

Phase Noise Analyzer  from Holzworth Instrumentation

The HA7062D from Holzworth is a real-time phase noise analysis system that operates from 10 MHz to 26 GHz (optional to 40 GHz). It provides measurement offsets from 0.1 Hz to 100 MHz. It is available in a fully shielded, fan-less 1U chassis that completely eliminates ground loops and troublesome microphonics for uncompromised performance and repeatability.
Download Datasheet | Product Details
RF & Microwave Isolator
Dual-Junction Isolator for Ultra-low Temperature Physics Research

RF & Microwave Isolator  from Low Noise Factory

The LNF-ISISC8_12A from Low Noise Factory is a Dual-Junction Isolator that operates from 8 to 12 GHz. It has an insertion loss of 0.2 dB, an isolation of 40 dB, and can handle up to 30 dBm of power. This isolator has been designed from the ground up to meet the strict requirements of ultra-low temperature physics research.
Download Datasheet | Product Details
Sponsored by Digi-Key
Amphenol RF SMA Panel Mount Receptacles
Amphenol RF SMA Panel Mount Receptacles Available Now from Digi-Key
The SMA panel mount receptacles offer excellent VSWR performance up to 18 GHz. Various panel mounting options, including 2-hole and 4-hole flanges configurations, make the connector suitable for a wide variety of microwave component applications. Click here to learn more.
 
RF Amplifier
50 W Solid State Power Amplifier from 1 to 6 GHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 50HM1G6AB-47 from AR RF/Microwave Instrumentation is a compact hybrid power amplifier module that operates from 1 to 6 GHz. When used with a sweep generator, it provides an output power of more than 40 watts with a gain of 48 dB and excellent flatness, noise figure, and low intermodulation distortion.
Download Datasheet | Product Details
RF Amplifier
1 Watt Linear Solid State Power Amplifier from 26.5 to 40 GHz

RF Amplifier  from Exodus Advanced Communications

The MPA3013 from Exodus Advanced Communications is a Power Amplifier that operates from 26.5 to 40 GHz. This rugged class A amplifier provides a P1dB of over 30 dBm with a linear gain of more than 36 dB. The device requires a DC supply voltage of 8 VDC and consumes up to 4.6 A of current. It is available in a module that measures 60 x 60 x 15 mm with 2.92 mm K-type female connectors.
Download Datasheet | Product Details
RF Shielded Test Enclosure
RF Shielded Test Box from 20 MHz to 6 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-1970-D from RF Electronics is an RF Shielded Test Box that operates from 20 MHz to 6 GHz. It is designed for WLAN, Bluetooth, RFID, and 3G device testing. This enclosure has a thick RF absorbing foam that provides an isolation of more than 120 dB @ 3 GHz. It has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
Download Datasheet | Product Details
RF Cable Assembly
DC to 22 GHz Coaxial Cable Assemblies for Space Applications

RF Cable Assembly  from W. L. Gore & Associates

The Type 8S Spaceflight Microwave RF Assemblies from GORE are ideally suited for space applications. They operate from DC to 22 GHz and transmit uninterrupted signals with low insertion loss (less than 2.83 dB/m), and excellent phase stability. These coaxial cable assemblies are ESCC 3408-Qualified and on the ESA Qualified Parts List (QPL).
Download Datasheet | Product Details
Block Up Converter
27.5 to 31 GHz GaN BUC for Ka-band Military SATCOM Systems

Block Up Converter  from ACORDE

The ACTX-Ka4W-Ex-V6 from Acorde is a Low Power GaN Block-Up Converter (BUC) that up-converts an Input frequency from 950 to 2000 MHz to an output frequency from 27.5 to 31 GHz. This BUC has been designed for Ka-band professional & military satellite communication systems (ground, SOTP, SOTM, maritime, etc.). It delivers a saturated output power of 36 dBm with a gain of more than 60 dB.
Download Datasheet | Product Details
Front End Module
C-Band Radar Front End MMIC from 5.2 to 5.6 GHz

Front End Module  from VIPER RF

The VRFC0127-BD from Viper RF is a C-Band Single-Chip Radar Front End MMIC that operates from 5.2 to 5.6 GHz. This MMIC consists of a low noise amplifier, high power amplifier and a transmit-receive switch. In the Tx mode, it delivers a saturated output power of 47 dBm with a small signal gain of 31 dB (@5.4 GHz) and has a PAE of over 40%.
Download Datasheet | Product Details
RFID Tag
Battery-Free RFID Tag with Built-in Temperature Monitoring

RFID Tag  from Omni-ID, Ltd

The DS004342-01 from Omni-ID is a battery-free RFID Tag with a built-in temperature sensor. It operates from 866-868 MHz (EU) and 902-928 MHz (US). This RFID tag has a read range of up to 3.5 m (Fixed reader) and up to 2 m (Handheld reader). It has an EPC and user memory of 128 bits, and a TID memory of 64 bits.
Download Datasheet | Product Details
Power Divider
2-Way Power Splitter/Combiner from 2 to 26.5 GHz

Power Divider  from Atlanta Micro

The AM4008 from Atlanta Micro is a 2-Way Power Splitter/Combiner that operates from 2 to 26.5 GHz. It has an insertion loss of less than 6.3 dB, isolation of over 14 dB, and can handle up to 27 dBm of input power. The device has an amplitude unbalance of 0.1 dB and a phase unbalance of 0.5 degrees. It is matched to 50-ohms and is available in a 1.3 x 2 mm DFN package.
Download Datasheet | Product Details
Base Station Antenna
10-Port Omni-directional Canister Antenna from 1695 to 5925 MHz

Base Station Antenna  from Galtronics Corporation Ltd

The GQ2410-06892 from GALTRONICS is a 10-Port Pseudo Omni-directional Canister Antenna that operates from 1695 to 5925 MHz. It has 4x ports for AWS/PCS/WCS/BRS bands from 1695 to 2690 MHz with Remote Electrical Tilt (RET) and individual panel down tilt control, 4x ports for the CBRS band from 3400 to 3800 MHz, and 2x ports for U-NII band from 5150 to 5925 MHz.
Download Datasheet | Product Details
Antenna
Small & Light Ceiling Mount Antenna from 150 to 6000 MHz for DAS Applications

Antenna  from Fractal Antenna Systems

The UACM-V from Fractal Antenna is an Omni Antenna designed for ceiling-mounted in-building Public Safety & DAS applications that require VHF coverage. The antenna operates from 150 to 6000 MHz with a gain of up to 10 dBi and can handle an input power of up to 20 Watts. The super wide-band antenna is built using Fractal’s proprietary and patented technologies.
Download Datasheet | Product Details
Base Station Antenna
Collinear Omni-Directional Antenna from 450 to 470 MHz

Base Station Antenna  from Sinclair Technologies

The Aurora SC34A-SF3SNF(DXX) from Sinclair is a Collinear Omni-Directional Antenna that operates from 450 to 470 MHz. It provides a gain of 10 dBd and can handle an average input power of up to 250 watts. This vertically-polarized antenna features a rugged design and UV protected radome for operation in harsh environments.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, articles, white papers and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]