1. everything RF
  2. RF Newsletters
more
PREV 25 March, 2020 NEXT

New RF and Microwave Products this Week

25 March, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 25 March, 2020
 
Sponsored by I-PEX
 
 
 
New RF & Microwave Products this Week
Balun
MMIC Balun Transformer from 10 to 24 GHz for SATCOM Applications

Balun  from Mini Circuits

The MTY2-243+ from Mini-Circuits is an MMIC Balun RF Transformer that operates from 10 to 24 GHz. Fabricated using HBT process technology, this transformer has an insertion loss of less than 2.2 dB, phase unbalance of 6 degrees and an amplitude unbalance of 0.7 dB. The device can handle an input power of up to 31 dBm and has a VSWR of 2:1.
Download Datasheet | Product Details
Cellular IoT Module
Global Multi-Band LPWA, LTE-M and NB-IoT Cellular Chipset

Cellular IoT Module  from u-blox AG

The UBX-R5 Series from u-blox is a Global Multi-Band Cellular Chipset that supports LPWA, LTE-M and NB-IoT technologies. It is optimized for IoT applications such as smart metering, telematics, tracking, security systems, building automation, as well as smart lighting solutions and connected health. It implements key features of 3GPP Release 14, answering the need for longevity in IoT solutions.
Download Datasheet | Product Details
Cellular Module
Multi-Band 5G NR/LTE-FDD/LTE-TDD and HSPA+ Module

Cellular Module  from SIMCom

The SIM8200G from SIMCom is a Multi-Band 5G NR/LTE-FDD/LTE-TDD and HSPA+ Module. It is suitable for high throughput data communication applications in a variety of radio propagation conditions. This LTE Cat22 module supports GPS/GLONASS/BeiDou/Galileo/QZSS services. The sub-6G module supports R15 5G NSA/SA modes and uplink 2 carrier aggregation (UL 2xCA) technology.
Product Details
RF Transceiver
UWB Wireless Transceiver IC from 3.1 to 6 GHz

RF Transceiver  from SPARK Microsystems

The SPARK SR1010 is a Bi-Directional Short Latency Wireless Transceiver IC that operates in the license-free UWB band from 3.1 to 6 GHz, enabling efficient and robust wireless communications. This UWB transceiver achieves 40x better energy efficiency, 60x lower latency, and 10x more data throughput as compared to BLE.
Download Datasheet | Product Details
RF Cable Assembly
Crush Resistant Coaxial Cable Assemblies up to 70 GHz

RF Cable Assembly  from Rosenberger

The LU5 Series from Rosenberger are Microwave Cable Assemblies that operate up to 70 GHz. These cable assemblies are designed in such a way that they can withstand pressures of up to 1000 N when subjected to harsh conditions. They can handle up to 59 watts of power and have a phase stability of up to 7 degrees.
Download Datasheet | Product Details
RF Cable
40 GHz Low Loss Cables with Triple Shielding

RF Cable  from MegaPhase

The NextPhase Cables from Megaphase are Low Loss Cables that operate up to 40 GHz. They are designed for general-purpose interconnect applications that require low loss and triple shielding. These cables provide over 90 dB of shielding effectiveness and can withstand up to 15 kV at 60 Hz.
Download Datasheet | Product Details
Sponsored by I-PEX
New 5G RF Connector from I-PEX
New 5G RF Connector from I-PEX
Introducing a new 5G solution, the MHF® 7S Micro-Coaxial RF Connector, from I-PEX. This innovative design gives unparalleled EMI performance in a small form factor. With a 1.5 VSWR max at 15 GHz, the MHF 7S solves 5G problems now. Click here to learn more.
 
RF Amplifier
5 W S-band SSPA form 2200 to 2500 MHz

RF Amplifier  from NuWaves Engineering

The NW-PA-S-5-Q01 from NuWaves is a Solid State Power Amplifier that operates from 2200 to 2500 MHz. This S-band amplifier delivers an output power of over 5 watts with a small signal gain of 27 dB. Based on the latest gallium nitride (GaN) technology, this amplifier offers 17 discrete, user-programmable, output options in 1 dB steps from the maximum RF output power level.
Download Datasheet | Product Details
RF Variable Attenuator
95.75 dB Solid State Programmable Attenuator from 0.3 to 8000 MHz

RF Variable Attenuator  from API Technologies - Weinschel

The 4205B-95.5 from API Technologies - Weinschel is a Solid State Programmable Attenuator that operates from 0.3 to 8000 MHz. It has an attenuation range from 0 to 95.75 dB with a step size of 0.25 dB and can handle up to 28 dBm of CW power. The attenuator can be controlled using parallel (TTL compatible), I2C, SPI, UART, or USB interfaces.
Download Datasheet | Product Details
RF & Microwave Circulator
Surface-mount Circulators from 290 MHz to 15 GHz

RF & Microwave Circulator  from UIY Inc.

The Surface Mount Circulators from UIY are operate from 290 MHz to 15 GHz. They have an insertion loss of below 0.6 dB, isolation of over 18 dB, and can handle up to 200 watts of forward power. These circulators are available in a module with SMT connectors as standard products and can also be ordered as a custom module. They are suitable for Military, Space & Commercial applications.
Download Datasheet | Product Details
90 Degree Hybrid Coupler
90-degree Hybrid Coupler from 1 to 4 GHz

90 Degree Hybrid Coupler  from VidaRF

The VHC1040A from VidaRF is a 90-degree Hybrid Coupler that operates from 1 to 4 GHz. The device has an insertion loss of 0.6 dB and an isolation of 22 dB. It has an amplitude balance of ±0.50 dB and a phase balance of ±5 degrees. This coupler can handle an input power of 50 watts and has a VSWR of 1.25:1. It is available in a module with connectors.
Download Datasheet | Product Details
Horn Antenna
mm-Wave Coaxial Horn Antenna from 6 to 67 GHz

Horn Antenna  from RFSpin

The QRH67 from RFspin is an mm-Wave Coaxial Horn Antenna that operates from 6 to 67 GHz. It can transmit and receive signals with high sensitivity across the full 61 GHz bandwidth. This dual-polarized antenna can handle input power levels as high as 5 W CW and 10 W peak. The compact antenna is available with a 1.85-mm coaxial connector for continuous frequency coverage with a low VSWR (less than 2.0:1) across its full frequency range.
Product Details
Front End Module
2.4 GHz Integrated FEM for Wi-Fi-6 Applications

Front End Module  from Qorvo

The QPF4216 from Qorvo is an integrated front end module (FEM) designed for Wi-Fi 6 (802.11ax) systems. It integrates a 2.4 GHz power amplifier (PA), regulator, a single pole two throw switch (SP2T), and a bypassable low noise amplifier (LNA) into a single device. This FEM also integrates a logarithmic power detector, which enables power control across the entire power spectrum.
Download Datasheet | Product Details
Sponsored by I-PEX
 
 
 
RF Mixer
0.1 to 5 GHz Downconverter Mixer for High-linearity Receivers

RF Mixer  from Guerrilla RF

The GRF7034 from Guerrilla RF is a Linear Downconverter Mixer with an integrated LO buffer and IF amplifier. The LO/ RF and IF frequencies of this Mixer can be tuned between 0.1 to 5 GHz. It has a conversion gain of 11.8 dB, an SSB noise figure of 8 dB, and an input IP3 of 11 dBm. The GRF7034 inputs and outputs are single-ended and internally matched to 50 ohms.
Download Datasheet | Product Details
Automotive Radar Chipset
24 GHz Transceiver MMIC for Automotive Radar Sensor

Automotive Radar Chipset  from STMicroelectronics

The STRADA431 from ST Microelectronics is a 24 GHz ISM-Band Transceiver MMIC for Automotive Radar sensor applications. This single-chip transceiver consists of one differential RF transmitter that delivers 13 dBm of power and three single-ended Rx channels. The device provides a programmable conversion gain of up to 60 dB and has an SSB noise figure of 11 dB.
Download Datasheet | Product Details
Signal Generator
10 MHz to 40 GHz, Phase Coherent, Multi-Channel RF Synthesizers

Signal Generator  from Holzworth Instrumentation

The HSX Series are broadband, phase-coherent frequency sources that are available in five frequency configurations from 10 MHz to 3 GHz, 6 GHz, 12 GHz, 24 GHz, and 40 GHz. They have industry-leading phase noise and spectral purity performance coupled with a highly accurate dynamic range from -110 to 20 dBm.
Download Datasheet | Product Details
RF Amplifier
32 W GaN Power Amplifier Module from 300 to 6000 MHz

RF Amplifier  from Triad RF Systems

The TA1216 from Triad RF Systems is a GaN Power Amplifier Module that operates from 300 to 6000 MHz. This class AB amplifier delivers an output power of 32 watts with a gain of 45 dB. It operates over a DC supply voltage from 12 to 28 V and draws 4 A of current. The amplifier is ideal for use in software-defined radios, general-purpose RF amplification, commercial/military radio systems.
Download Datasheet | Product Details
Block Up Converter
50 W Ka-Band Block Up-Converter from 30 to 31 GHz

Block Up Converter  from Wavestream Corporation

The JNB-KAM050 from Wavestream is a Ka-Band Deck Block Up-Converter that converts an input frequency from 1000 to 2000 MHz to an output frequency from 30 to 31 GHz. It provides a saturated output power of 50 watts (25 W of linear power) with a small signal gain of 62.5 dB. The device operates over an AC supply voltage of 90 to 264 VAC and draws up to 400 watts of power (at linear output power).
Download Datasheet | Product Details
Termination
15 W Termination from DC to 12.4 GHz

Termination  from MECA

The 403-8 from MECA is an RF Termination that operates from DC to 12.4 GHz. It can handle an average power of 15 watts and a peak power of 2 kW. This 50-ohm termination has a VSWR of less than 1.50:1 and is available in a connectorized package that measures 1.90 (Length) x 1.25 (Diameter) inches with an SMA (F) connector.
Download Datasheet | Product Details
RF Inductor
0.9 to 220 nH Surface Mount Ceramic Chip Inductors

RF Inductor  from Gowanda

The CC0402 Series from Gowanda are Ceramic Chip Inductors with inductance values from 0.9 to 220 nH. They have DCR values from 0.04 to 2 Ohms, Q values from 10 to 25, and self-resonant frequencies (SRF) from 190 to 6000 MHz. These surface-mount inductors have DC current ratings from 37.5 to 1020 mA.
Download Datasheet | Product Details
RF Spectrum Analyzer
Spectrum Analyzer + Vector Network Analyzer from 9 kHz to 7.5 GHz

RF Spectrum Analyzer  from SIGLENT

The SSA3075X from Siglent is a Spectrum Analyzer and Vector Network Analyzer that operates from 9 kHz to 7.5 GHz. The spectrum analyzer has a resolution bandwidth of 1 Hz to 3 MHz and an SSB phase noise of less than -98 dBc/Hz at 1 GHz with a 10 kHz offset. It has a Displayed Average Noise Level (DANL) of -165 dBm/Hz and supports AM, FM and ASK, FSK, PSK, MSK, QAM modulation analysis.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]