1. everything RF
  2. RF Newsletters
more
PREV 27 August, 2014 NEXT

New RF & Microwave Products

27 August 2014 - everything RF Newsletter
 
everything RF
Date: 27 August 2014
 
Sponsored by Aeroflex / Inmet
 
 
 
New RF & Microwave Products this Week
RF Amplifier
2.4 GHz High Power Amplifier with low EVM and Current Consumption for 256-QAM

RF Amplifier from Microchip Technology Inc.

The SST12CP21 from Microchip is a 2.4 GHz 256-QAM RF high-power amplifier with a low EVM and current consumption for 256-QAM and 802.11n systems. It delivers high linear output power of up to 23 dBm at 1.75% dynamic EVM.
 
Download Datasheet | Product Details
 
Diplexer
900 to 1450 (Lower Pass Band) and 1650 to 2200 MHz (Upper Pass Band) Ceramic Diplexer

Diplexer from Johanson Technology

The 1175DP41B1925 from Johanson Technology is a ceramic diplexer. It can handle up to 500 mW of CW power and has an insertion loss of 1.62 dB. The diplexer provides a return loss of over 9.5 dB and an attenuation of 30 dB. It is available in surface mount package.
 
Download Datasheet | Product Details
 
Band Pass Filter
1920 to 1980 MHz Band Pass Filter for Base Station Applications

Band Pass Filter from K&L Microwave

The WSF-00172 from K&L Microwave is a Band Pass Filter with passband from 1920 to 1980 MHz. This small filter has an insertion loss 0.8 dB, return loss of 15 dB and rejection levels over 40 dB. It can used in Picocell, Microcell and Macrocell base station installations as well as for handset testing.
 
Download Datasheet | Product Details
 
Band Pass Filter
400 MHz to 6000 MHz Ceramic Band Pass Filters

Band Pass Filter from Networks International Corporation

The ceramic resonator filters from NIC are designed for applications which need high performance in small packages. They can be used in both environmentally benign and rugged conditions. These filters operate from 400 to 6000 MHz (Configurable based on the requirement) and can handle power up to 10 W. They matched to 50 Ohms and have a VSWR of 1.5:1.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
Surface Mount 6864 MHz Frequency Synthesizer

Frequency Synthesizer from Z-COMM

The SFS6864A-LF from Z-COMM is a Frequency Synthesizer that generates a frequency of 6864 MHz. The synthesizer has an output power of 6 dBm and has a setting time of 0.3 ms. It is available in surface mount package and can be used in SATCOM, Test Equipment and point to point transmission applications.
 
Download Datasheet | Product Details
 
Limiter
30 to 38 GHz GaAs MMIC Limiter Handles 1 W of Power

Limiter from Triquint

The TGL2203 from Triquint is a wideband MMIC GaAs VPIN limiter that operates from 30 to 38 GHz. It has a low insertion loss of 1 dB and can handle up to 1 W of incident power with a low flat leakage of 20 dBm. The TGL2203 is ideally suited to support both commercial and defence related applications.
 
Download Datasheet | Product Details
 
Sponsored by Aeroflex / Inmet
Aeroflex - Inmet
Meet the New Magic Number for 2 Watt Temperature Variable Attenuators
Push the limits of frequency without sacrificing performance. Aeroflex/Inmet’s new DC to 12 GHz Powerfilm surface mount attenuators vary with temperature and are the perfect balance of price, power, and dependability. To learn more, download the data sheet.
 
 
 
Front End Module
Front End Module for Mobile & Portable 802.11ac Applications

Front End Module from Skyworks

The SKY85712-21 is a Front End Module with an integrated SPDT (Tx/Rx) Switch, Low Noise amplifier and Power Amplifier developed for mobile/portable 802.11ac applications in the 5 GHz Band. The FEM has a transmit gain of 28 dB and a receive gain of 12 dB. It is available in a 3 x 3 mm QFN package.
 
Download Datasheet | Product Details
 
RF Transistor
20 Watt, DC to 3.5 GaN Transistor for Military Radar & Radio applications

RF Transistor from Triquint

The TGF2819-FL from Triquint is a GaN transistor that operates from DC to 3.5 GHz. It provides 20 W of power and has a gain of 14 dB. The transistor requires a 32 V supply and draws 12 A of current. It can be used in military radar, civilian radar, military radio communications, wideband/narrowband amplifiers and jammer applications.
 
Download Datasheet | Product Details
 
RF Transistor
DC to 3.5 GHz GaN Pulsed Power Transistor Provides 15 Watts

RF Transistor from MACOM

The MAGX-000035-015000 from MACOM is a DC to 3.5 GHz Pulsed Power Transistor. It has been developed using GaN on SiC and requires a 50 V supply. It has been designed for commercial wireless infrastructure applications like LTE, WCDMA etc. and can also be used for Military, SATCOM and other general purpose applications.
 
Download Datasheet | Product Details
 
RF Amplifier
Linear Power Amplifier from 2.5 to 6 GHz Provides 50 Watts Saturated Power

RF Amplifier from Ophir RF

The 5304043 from Ophir RF is a lightweight broadband, power amplifier module which operates from 2.5 to 6 GHz. The amplifier provides up to 50 W of saturated power, a gain of over 50 dB with a noise figure of 10 dB, harmonics of -20 dBc, spurious of -60 dBc and requires a 24 V DC supply. It can accept CW/AM/FM/PM/Pulse input signal formats and operates in a class A/AB mode.
 
Download Datasheet | Product Details
 
RF Amplifier
2620 to 2690 MHz GaN Power Amplifier for LTE Applications

RF Amplifier from RFHIC

The RTP26030-22 from RFHIC is a GaN on SiC HEMT power amplifier that operates from 2620 to 2690 MHz. It provides 55 dB of gain and an output saturation power of 53 W. The power amplifier requires a 48 V supply for operation and draws 1.6 A of current. It is matched to 50 Ohms at the input and output. The RTP26030-22 can be used in LTE, WiMAX DPD and general purpose RF amplifier applications.
 
Download Datasheet | Product Details
 
Coaxial Termination
0.698 to 2.7 GHz Low PIM 50 Watt Termination

Coaxial Termination from MECA

The LPT50 Series are low PIM 50 Watt Terminations that operate from 0.698 to 2.7 GHz. They have a PIM of less than -155 dBc and a VSWR of 1.1:1. The terminations are available with a number of connector options - 7/16 DIN, Type N & 4.1/9.5 (mini-DIN) connectors.
 
Download Datasheet | Product Details
 
Coaxial Isolator
25 W, Low Loss 0.50" Coaxial Isolator from 6 to 40 GHz

Coaxial Isolator from VidaRF

The VCI Series of Isolators from VidaRF are 0.5&rdquo coaxial isolators that are available in frequency configurations from 6 to 40 GHz. The isolators have a low insertion loss and isolation of over 17 dB. They can handle 25 W of forward power and 1 Watt of reverse power. This series of coaxial isolators are available with N Type, SMA and K Type connectors. Custom configurations are available on request.
 
Download Datasheet | Product Details
 
Fixed Attenuator
DC to 12.4 GHz Chip Attenuators from 0 to 20 dB

Fixed Attenuator from Aeroflex - Inmet

The PCAL Series from Aeroflex - Inmet are tabbed fixed attenuator that operate from DC to 12.4 GHz with attenuation options available from 0 to 20 dB. Each attenuator can handle up to 1.5 W of power. The attenuators are available in a chip package.
 
Download Datasheet | Product Details
 
Between Series Coaxial Adapter
Low PIM DIN Male to Type N Female Adapter up to 6 GHz

Between Series Coaxial Adapter from HASCO Components

The MDP-NJ-SLP from HASCO is a low PIM DIN Male to Type N Female adapter. It can operate up to 6 GHz with a VSWR of 1.2:1. The adapter is matched to 50 Ohms and has a PIM less than -168 dBc (at 1800 MHz, 43 dBm per tone). It has a silver plated BeCu inner conductor and a PTFE dielectric.
 
Download Datasheet | Product Details
 
Drop-In Circulator
690 to 1100 MHz Drop-In Circulator Handles up to 350 W CW Power

Drop-In Circulator from Renaissance Electronics Corporation

The 3G2BG from Renaissance Electronics is a wideband drop-in circulator that operates from 690 to 1100 MHz. It can handle up to 350 W of CW power with an insertion loss of 0.5 dB. The 3G2BG has a VSWR of 1.40:1 and comes in a compact size of 2 x 2 x 0.6 inch drop-in package.
 
Download Datasheet | Product Details
 
Modulator
85 MHz to 18 GHz Vector Modulator

Modulator from Planar Monolithics Industries

The PIQ-85M18G-360/20-CD-2 from PMI is a vector modulator that operates from 85 MHz to 18 GHz. It has an insertion loss of 3dB ± 4dB and return loss of 10 dB. The vector modulator requires a single 2.7 V to 3.6 V supply and has SMA Female connectors.
 
Download Datasheet | Product Details
 
RF Switch
1 to 2 GHz SPDT Absorptive Switch with 90 dB Isolation

RF Switch from Pasternack Enterprises Inc

The PE71S5002 from Pasternack is a SPDT high isolation absorptive switch that operates from 1 to 2 GHz. It offers a port-to-port isolation of 90 dB, an insertion loss of 1 dB with a switching speed of 75 ns. This pin diode switch can handle power up to 32 dBm and has a VSWR of 1.3:1.
 
Download Datasheet | Product Details
 
RF Switch
2 to 6 GHz SP4T Reflective Switch with 80 dB Isolation

RF Switch from Pasternack Enterprises Inc

The PE71S5003 from Pasternack is a SP4T high isolation reflective switch. It offers a port-to-port isolation of 80 dB, an insertion loss of 1.8 dB with a switching speed of 35 ns. This pin diode switch can handle power up to 27 dBm and has a VSWR of 1.5:1. It can be used for test & measurement, military communications, space, electronic warfare and GaAs MMIC-based applications.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.