1. everything RF
  2. RF Newsletters
more
PREV 1 April, 2020 NEXT

New RF and Microwave Products this Week

1 April, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 1 April, 2020
 
Sponsored by PCB Directory
 
 
 
New RF & Microwave Products this Week
RF Mixer
Rad-Tolerant Double-Balanced Diode Mixer from 18 to 46 GHz

RF Mixer  from Teledyne e2v HiRel Electronics

The TDMX011037 from Teledyne e2v HiRel Electronics is a Double-Balanced Passive Diode Mixer with an LO/RF frequency from 18 to 46 GHz and an IF frequency from DC to 20 GHz. The device has a conversion loss of less than 12 dB and an LO to RF isolation of 35 dB. It has an LO power of up to 23 dBm and an RF/IF power of up to 20 dBm. This RoHS-compliant mixer is ideal for use in Ku/Ka-band orbital transmit/receive modules and satellite microwave communication applications.
Download Datasheet | Product Details
RF Mixer
GaAs MMIC Double Balanced Mixer from 5 to 12 GHz

RF Mixer  from Analog Devices

The HMC220B from Analog Devices is a double balanced GaAs MMIC mixer with an RF/LO Frequency from 5 to 12 GHz and an IF Frequency from DC to 4 GHz. It provides excellent LO to RF and LO to IF isolation due to an optimized balun structure and has an LO drive level as low as 7 dBm. This mixer is ideal for use in VSAT Equipment, Microwave and Military radios, Wireless Backhaul equipment, Radars and EW systems.
Download Datasheet | Product Details
Vector Network Analyzer
75 Ohm Compact USB VNA from 20 kHz to 3.0 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The S7530 is a 2 Port Compact VNA that operates up to 3 GHz. It has a wide dynamic range and can be operated with any Windows PC or laptop. Its small size makes it easy to carry around to test sites or to share within a team. In addition to S parameters (S11, S12, S21, S22) this VNA has a variety of analysis capabilities, including time-domain with gating and frequency offset modes.
Download Datasheet | Product Details
Band Pass Filter
Ceramic Band Pass Filter from 3300 to 4200 MHz

Band Pass Filter  from Johanson Technology

The 3750BP14A0900 from Johanson Technology is a Ceramic Band Pass Filter with a passband from 3300 to 4200 MHz. The filter has an insertion loss of less than 2.7 dB and provides over 20 dB of attenuation above and below the band. It can handle up to 3 watts of input power and is available in a surface-mount package.
Download Datasheet | Product Details
Fixed Attenuator
2 dB Coaxial Fixed Attenuator from DC to 50 GHz

Fixed Attenuator  from ERAVANT

The SCA-02-2M2F-S2 from Eravant is a Coaxial Fixed Attenuator that operates from DC to 50 GHz. The device provides an attenuation of 2 dB and can handle an input power of 1 watt. This RoHS-compliant attenuator is available with 2.4 mm Male / Female connectors and is ideal for use in mmWave systems, test labs, instrumentations, system integration, and coaxial band applications.
Download Datasheet | Product Details
Fixed Attenuator
100 W Fixed Attenuator from DC to 6 GHz

Fixed Attenuator  from JFW Industries

The 50HF-XXX-100/6 from JFW Industries is a Fixed Attenuator that operates from DC to 6 GHz. It is available in 3, 6, 10, 20, 30 and 40 dB attenuation configurations with a VSWR of less than 1.45:1. This 50-ohm attenuator can handle up to 100 Watts of average power, up to 1000 Watts of peak power, and is available with SMA, N, 4.3/10.0, or 7/16 connectors.
Download Datasheet | Product Details
RF Amplifier
750 W Solid-State Amplifier from 80 to 1000 MHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 750W1000B from AR RF/Microwave Instrumentation is a Solid-State Amplifier that operates from 80 to 1000 MHz. This self-contained, air-cooled amplifier when used with an RF sweep generator, provides more than 750 watts of power with a gain of over 58.8 dB. This class A amplifier has a Digital Control Panel (DCP) from where the gain and power level can be controlled.
Download Datasheet | Product Details
Block Up Converter
X-band GaN Block Upconverter for Satellite Uplink Applications

Block Up Converter  from Communications & Power Industries

The SB50XOA from CPI is an X-band GaN Block Upconverter that is designed for use in satellite uplink applications. This BUC converts an input frequency (IF) from 950 to 1450 MHz to an RF frequency from 7.9 to 8.4 GHz. It delivers a saturated output power of 100 watts with a gain of over 70 dB. The device supports both AC (90 to 264 V) and DC (40 to 60 V) input voltage options.
Download Datasheet | Product Details
RF Amplifier
10 W Power Amplifier from 5050 to 5250 MHz

RF Amplifier  from RFcore

The RCA5053H40D1 from RFcore is a High Power Amplifier that operates from 5050 to 5250 MHz. The amplifier provides a saturated output power of more than 10 watts with a gain of over 40 dB. It operates over a DC supply voltage from 26 to 30 V and consumes less than 2 Amps of current. This RF amplifier is available in a module that measures 110 x 90 x 25 mm with SMA (F) connectors.
Download Datasheet | Product Details
RF Amplifier
41 W GaN Power Amplifier from 1 to 6 GHz

RF Amplifier  from Microwave Systems JSC

The MS010620 from Microwave Systems is a Multi-Octave High Power GaN Amplifier that operates from 1 to 6 GHz. It provides a saturated output power of 41 Watts with a small signal gain of over 55 dB which can be controlled digitally. The amplifier is suitable for applications such as communications systems, radar systems, test instrumentation, broadband RF telemetry, point-to-point radio, and fiber optics.
Download Datasheet | Product Details
Directional Coupler
10 dB Directional Coupler from 6 to 18 GHz

Directional Coupler  from UMCC

The DC-N000-10S from UMCC is a Directional Coupler that operates from 6 to 18 GHz. This 10 dB coupler has an insertion loss of less than 1.2 dB and directivity of more than 13 dB. It can handle 10 watts of CW power and 0.5 kW of average peak power. This 50-ohms coupler is available in a module with SMA (F) connectors.
Download Datasheet | Product Details
90 Degree Hybrid Coupler
2x2 Hybrid Coupler from 617 to 5925 MHz for Small Cell Applications

90 Degree Hybrid Coupler  from Microlab

The CA-141E from Microlab is a 2x2 Hybrid Coupler that operates from 617 to 5925 MHz. This 90-degree hybrid coupler provides isolation of more than 18 dB. It can handle up to 100 watts of average power and has a VSWR of less than 1.30:1. The device has a low PIM of -161 dBc and comes with an IP67 rating. This RoHS-compliant coupler is ideal for UWB, small cell and D-RAN applications.
Download Datasheet | Product Details
Sponsored by PCB Directory
 
 
 
Power Divider
4-Way Power Divider from 1 to 18 GHz

Power Divider  from VidaRF

The VPD10180A4 from VidaRF is a 4-way Power Divider that operates from 1 to 18 GHz. This divider has an insertion loss of 2.9 dB and an isolation of over 15 dB. It has an amplitude balance of ±0.8 dB and a phase balance of ±10 degrees. The divider is available in a module with connectors.
Download Datasheet | Product Details
RF Over Fiber Module
RF-over-Fiber Transceiver Module from 2 to 40 GHz

RF Over Fiber Module  from RFOptic

The RFoF-40GHz-Q0-Mini-P from RFOptic is an RF over Fiber Transceiver Module that operates from 2 to 40 GHz. The module provides a spurious-free dynamic range (SFDR) of 112 dB/Hz. It has a noise figure of 34 dB and phase noise of -100 dBc/Hz at 10 kHz offset. The module is suitable for distributed antenna, SATCOM, radio telescopes, telecommunication (antenna remoting and long RF links via fiber), and EW applications.
Download Datasheet | Product Details
RF Switch
6 GHz to 18 GHz SPDT Solid State Switch

RF Switch  from Planar Monolithics Industries

The P2T-6G18G-40-R-570-TFF-1D6KW is an SPDT solid-state switch that operates from 6 GHz to 18 GHz. It can handle up to 1.6 kW of power, has a duty cycle of 8% and a pulse width of 250 uS. The switch has a low insertion loss of under 2.2 dB and an isolation of over 40 dB with a 200 nS switching speed. It requires a DC operating voltage of +5 VDC / -70 VDC.
Download Datasheet | Product Details
RF Switch
GaAs SPDT Non-Reflective Switch from DC to 12 GHz

RF Switch  from arQana Technologies

The AWA4400-QA from arQana Technologies is a GaAs SPDT Switch that operates from DC to 12 GHz. This non-reflective MMIC switch has an insertion loss of under 1.5 dB, an isolation of over 35 dB, and a switching time of less than 50 ns. The device is available in a QFN package that measures 3 x 3 mm and is ideally suited for use in radar applications and point-to-point transceiver modules.
Download Datasheet | Product Details
Wireless SoC
Bluetooth 5.2 SoC with Built-in USB for BLE, Bluetooth Mesh, Thread and Zigbee

Wireless SoC  from Nordic Semiconductor

The nRF52820 from Nordic Semiconductor is a System-on-Chip (SoC) offering USB and advanced wireless connectivity in a small package, for HID, smart home, commercial, and industrial applications. The 2.4 GHz multi-protocol radio provides up to 8 dBm output power and has receiver sensitivity of -95 dBm. It supports all Bluetooth Low Energy features, including Direction Finding, high-throughput 2 Mbps, Long Range, and all Bluetooth 5.2 features.
Download Datasheet | Product Details
RF Module
2x2 MIMO Dual Band WiFi Module for Access Points

RF Module  from Compex Systems

The WLE600VX from Compex is a 2x2 MIMO WiFi Module designed for dual-band wireless access points. The 802.11ac and backward compatible (802.11a/b/g/n) module is based on Qualcomm's Atheros QCA9982 chipset. This module provides 21 dBm of output power at 2.4 GHz and 20 dBm of power at 5 GHz (per chain). It provides data rates of up to 867 Mbps.
Download Datasheet | Product Details
Waveguide Circulator
High Power Waveguide Circulator for S-Band Applications

Waveguide Circulator  from EM Design

The 102885 from EM Design is a 3-port Waveguide Circulator with a center frequency of 2.856 GHz (it can be optimized for other frequencies). This S-band circulator has an insertion loss of less than 0.25 dB and an isolation of more than 35 dB. It can handle an average power of 35 kW and has a VSWR of less than 1.10:1. The device measures 29.3-inches in length and is available with a CPR284F waveguide flange.
Download Datasheet | Product Details
In Series RF Adapter
2.92 mm Plug-to-Jack Adapter from DC to 40 GHz

In Series RF Adapter  from Rosnol

The ADL-K1K25A/9XX-9X from Rosnol is a 2.92 mm Plug to Jack Adapter that operates from DC to 40 GHz. This in-series adapter has an insertion loss of less than 0.05 dB and a VSWR of 1.25:1. This 50-ohm RoHS-compliant adapter can operate at a temperature from -55 to 100 degrees Celsius.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]