1. everything RF
  2. RF Newsletters
more
PREV 8 April, 2020 NEXT

New RF and Microwave Products this Week

8 April, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 8 April, 2020
 
Sponsored by Skyworks
 
 
 
New RF and Microwave Products this Week
RF Transistor
400 W Thermally-Enhanced LDMOS Transistor from 2620 to 2690 MHz

RF Transistor  from Wolfspeed, A Cree Company

The PXAE263708NB from Wolfspeed is a Thermally-Enhanced RF LDMOS FET that operates from 2620 to 2690 MHz. The transistor provides an output power of 400 watts with a gain of 15 dB and has an efficiency of 49% while operating from a 28 V supply. This pulsed / CW device has a pulse width of 10 µs and a duty cycle of 10%.
Download Datasheet | Product Details
RF Amplifier
5 W Broadband Power Amplifier from 81 to 86 GHz

RF Amplifier  from QuinStar Technology Inc

The QPW-81863741 from QuinStar Technology is an mm-Wave Broadband Power Amplifier that operates from 81 to 86 GHz. It provides a saturated output power of 5 Watts with a gain of 37 dB. The amplifier requires a 12 V supply voltage and consumes 12 amps of current. It is available in a module with customizable interconnect options.
Download Datasheet | Product Details
Switch Matrix
12x SP4T Switch Box from DC to 6 GHz for High-Volume RF Testing

Switch Matrix  from Ranatec

The RF2018B from Ranatec is ‘Plug-and-Play’ Switch System with 12 SP4T switch modules that operate from DC to 6 GHz. This solid-state switch box is designed for automation testing during the development and manufacturing of semiconductors and wireless devices. The switch system has an insertion loss of less than 1.9 dB (up to 3 GHz) and can handle up to 30 dBm of input power.
Product Details
RF Amplifier
X-Band Transmitter from 9.3 to 9.7 GHz for Radar Applications

RF Amplifier  from RFHIC

The RRP9397400-560 from RFHIC is an X-band Solid-State Transmitter designed for high power radar and weather radar applications. It operates from 9.3 to 9.7 GHz while providing up to 400 W of power with a gain of 56 dB and efficiency of 25%. This solid-state transmitter has a pulse droop of 1 dB and a duty cycle of 10%.
Download Datasheet | Product Details
Fixed Attenuator
Thin-Film Attenuators from DC to 40 GHz

Fixed Attenuator  from Passive Plus Inc

The PAT Series from Passive Plus are Thin-Film Attenuators that operate from DC to 40 GHz. They are available in attenuation values from 0.5 to 24.5 dB and power levels from 250 mW to 16 W based on the Thin Film Material used. These attenuators provide very little distortion of the signal, maintaining accuracy up to 40 GHz. The attenuators are available with or without center taps and are ideal for non-magnetic applications.
Download Datasheet | Product Details
TCXO
10 to 40 MHz Stratum 3 TCXO

TCXO  from MtronPTI

The M6071 series from MtronPTI is a Stratum 3 TCXO with an oscillation frequency from 10 to 40 MHz. This Stratum 3 TCXO has a phase noise of -97 dBc/Hz (@ 10 Hz offset @ 38.8 MHz) and has a stability as low as ±0.1ppm while operating from -40 to 105 degrees celsius. The RoHS compliant oscillator requires a supply voltage of 3.3 V and provides a CMOS or Clipped Sinewave output.
Download Datasheet | Product Details
Sponsored by Skyworks
SKY85747-11
High-Power Front-end Modules for Wi-Fi 6 Applications
Skyworks’ SKY85747-11 5 GHz FEM is designed for high-power Wi-Fi 6 (802.11ax) applications and systems. This highly integrated solution incorporates switching, low-noise amplifier with bypass and power amplifier for devices such as networking and WLAN-enabled wireless video streaming systems. Click here to learn more.
 
RF Amplifier
Military Grade Low Noise Amplifier from 8 to 18 GHz

RF Amplifier  from Mesa Microwave

The MMC-SSPA-0818-2125 from Mesa Microwave is a Low Noise Amplifier that operates from 8 to 18 GHz. The device provides a P1dB of more than 21 dBm with a gain of over 25 dB and has a noise figure of less than 6 dB. It operates over a DC supply voltage of 15 V and consumes 150 mA of current. This RoHS-compliant amplifier is available in a module with SMA (F) connectors.
Download Datasheet | Product Details
Signal Generator
Benchtop Signal Generator from 100 MHz to 20 GHz

Signal Generator  from Mercury Systems

The SIG-20 from Mercury Systems is a CW Signal Generator that operates from 100 MHz to 20 GHz in 1 Hz steps. It can generate a signal with an output power of 13 dBm and a phase noise of less than -134 dBc/Hz (@ 2.5 GHz output and 1 MHz offset). The generator has a switching speed of 200 ms. This benchtop device is available as a 2U, 1/2 rack with an SMA (F) connector.
Download Datasheet | Product Details
Phase Noise Analyzer
10 MHz to 26 GHz Real-Time Phase Noise Analyzer

Phase Noise Analyzer  from Holzworth Instrumentation

The HA7062D from Holzworth is a real-time phase noise analysis system that operates from 10 MHz to 26 GHz (optional to 40 GHz). It provides measurement offsets from 0.1 Hz to 100 MHz. A key component of the analog front end is a pair of Holzworth HSX Series RF Synthesizers as the test system’s internal LOs.
Download Datasheet | Product Details
RF Amplifier
0.1 to 18 GHz Low Noise Cryogenic Amplifier

RF Amplifier  from AmpliTech

The APTC4-00101800-2510-D4-T from Amplitech is a low noise cryogenic amplifier that operates from 0.1 to 18 GHz. This amplifier has a gain of 23 dB, flatness of 2.5 dB and a noise figure of less than 2.5 dB. It can provide an output power of 10 dBm. The amplifier is available in a module with SMA connectors.
Download Datasheet | Product Details
RF Amplifier
GaN Low Noise Amplifier from 6 to 12.5 GHz

RF Amplifier  from OMMIC

The CGY2222UH from OMMIC is a GaN Low Noise Amplifier MMIC designed to operate in the X-band from 6 to 12.5 GHz. It provides an output power of 20 dBm with a gain of 20 dB and a noise figure of 1.5 dB. The amplifier requires a DC supply voltage of 8 V and consumes 160 mA of current. This 50-ohm amplifier is available as a die that measures 1.56 x 3.5 mm.
Download Datasheet | Product Details
RF Amplifier
1000 W GaN Solid State Power Amplifier from 0.8 to 3.2 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP2103P from Exodus Advanced Communications is a Solid State Power Amplifier that operates from 0.8 to 3.2 GHz. The amplifier provides an output power of more than 500 watts CW and 1000 watts Pulsed with a power gain of 60 dB. During pulsed more operation it has a pulse width of 100 us and a duty cycle of 10%.
Download Datasheet | Product Details
Sponsored by Skyworks
 
 
 
RF Shielded Test Enclosure
Benchtop RF Shield Box from 20 MHz to 6 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-S860 from RF Electronics is an RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. The enclosure has a thick RF absorbing foam that provides an isolation of more than 120 dB @ 3 GHz. It has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
Download Datasheet | Product Details
RF Cable Assembly
Light Armored Low Loss Cable Assemblies up to 40 GHz

RF Cable Assembly  from MegaPhase

The Survivor Series from MegaPhase are low loss armored cables that operate up to 40 GHz. These low density dielectric cables are constructed using a flexible stainless steel armor designed to handle rigorous test environments and provides high crush resistance. It can be used to make cable assemblies with Type N, SMA, 3.5 mm, 2.9 mm, and 2.4 mm connectors.
Download Datasheet | Product Details
RF Module
Automotive-Grade Wi-Fi 6 and Bluetooth 5.1 Modules

RF Module  from u-blox AG

The JODY-W3 series from u-blox AG are Automotive-Grade multi-radio modules featuring Wi-Fi 6 with 2x2 MIMO and dual-mode Bluetooth 5.1. These modules are intended for in-car infotainment and connectivity systems. They support the new Wi-Fi 6 standard and operate simultaneously at 2.4 GHz and 5 GHz to enable the highest possible performance in terms of data rates.
Download Datasheet | Product Details
RF Module
Dual Band Wi-Fi and Bluetooth 5.0 Combo Module

RF Module  from Jorjin Technologies

The WG3221-00 from Jorjin is a Wireless LAN and Bluetooth Combination Module that supports 1×1 IEEE 802.11a/b/g/n/ac WLAN and Bluetooth 5.0, enabling seamless integration of WLAN/BT and Bluetooth low-energy technology. The WLAN function is connected to the host processor via an SDIO interface, and the Bluetooth is connected via a UART interface.
Download Datasheet | Product Details
Microwave Backhaul Radio Links
E-Band Point-to-Point 10 Gbps mm-Wave Radio

Microwave Backhaul Radio Links  from Cambium Networks

The PTP850E from Cambium Networks is a Milli-meter Wave Radio that operates from 71 to 76 GHz and 81 to 86 GHz in the E-band. This point-to-point outdoor backhaul solution supports 250, 500, 1000, and 2000 MHz channels BPSK to 512 QAM and delivers up to 10 Gbps Ethernet throughput in a 1+0 configuration.
Download Datasheet | Product Details
Power Divider
2-Way Power Divider from 5 to 500 MHz

Power Divider  from Synergy Microwave Corporation

The SDL-2 from Synergy Microwave is a 2-Way Power Divider that operates from 5 to 500 MHz. The device has an insertion loss of less than 1 dB, isolation of over 20 dB, and can handle an input power of up to 1 watt. It has a phase unbalance of less than 5 degrees and an amplitude unbalance of 0.6 dB. This RoHS-compliant power divider is available in a surface-mount package.
Download Datasheet | Product Details
Balun
1:1 Balun from 50 to 1200 MHz for CATV Application

Balun  from MACOM

The MABA-009057-CT19E0 from MACOM is a 1:1 Transmission Line Transformer/Balun with tertiary winding. It operates from 50 to 1200 MHz with an insertion loss of less than 1.1 dB, a return loss of 16 dB, and can handle up to 250 mW of power. This 75-Ohm Balun has an amplitude balance of less than 0.9 dB and a phase balance of 10 degrees.
Download Datasheet | Product Details
Voltage Controlled Oscillator
Voltage Controlled Oscillator from 865 to 960 MHz

Voltage Controlled Oscillator  from Z-COMM

The SMV0912B-LF from Z-COMM is a VCO that operates from 865 to 960 MHz. It delivers 3 dBm of output power into a 50-Ohm load with a low phase noise of -100 dBc/ Hz @ 10 kHz offset. The VCO has a tuning voltage range from 0 to 2.5 Vdc with an average sensitivity of 80 MHz/V. It features a 2nd harmonic suppression of -10 dBc and consumes 6 mA of current while operating from a 3.0 Vdc supply.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, upcoming events, articles, white papers and more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]