PREV 22 April, 2020 NEXT

New RF and Microwave Products this Week

22 April, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 22 April, 2020
 
Sponsored by SV Microwave
 
 
 
New RF and Microwave Products this Week
Bi-Directional Coupler
Low Loss Coupler from 3 to 67 GHz

Bi-Directional Coupler  from Maury Microwave

The LLC67-185-FF from Maury Microwave is a low loss coupler that operates from 3 to 67 GHz. This broadband coupler provides 35/45 dB of coupling with a directivity of 18 dB and an insertion loss of less than 0.4 dB. It can handle an average power of 10 watts and a peak power of up to 100 watts. The coupler is available in a module with 1.85 mm female I/O connectors.
Download Datasheet | Product Details
Power Sensor
High Precision Pulse Power Sensors from 400 kHz to 60 MHz

Power Sensor  from Bird

The 7037 Series from Bird Technologies are Precision Pulse Power Sensors that provide high accuracy measurements in the laboratory and semiconductor fab environments. They operate from 400 kHz to 60 MHz (0.4, 2, 13.56, 27.12, 40.68 and 60 MHz options are available). They have a power range from 10 W to 10 kW.
Download Datasheet | Product Details
USB Power Sensor
USB Controlled Pulse Power Sensor from 4 kHz to 6 GHz

USB Power Sensor  from AR RF/Microwave Instrumentation

The PSP102 from AR RF/Microwave Instrumentation is a USB Controlled Pulse Power Sensor that operates from 4 kHz to 6 GHz. This power sensor can convert a PC or laptop with a USB 2.0 port into an RF power meter/analyzer. Power measurements can be displayed on the computer screen or can be integrated into a test system with a set of user-defined software functions.
Download Datasheet | Product Details
Limiter
2 to 4 GHz PIN Diode Limiter for Military Applications

Limiter  from Teledyne e2v HiRel Electronics

The TDLM202402 from Teledyne e2v HiRel Electronics is a Quasi-Active Silicon PIN Diode Limiter Module that operates in the S-band from 2 to 4 GHz. It provides passive receiver protection (always on), which protects against high CW average power up to 50 dBm, high pulsed peak power up to 60 dBm (25 µsec pulse width @ 5% duty cycle).
Download Datasheet | Product Details
RF Cable
Ultra Low Loss Cables from 300 MHz to 67 GHz

RF Cable  from MegaPhase

The Phase3 from MegaPhase are ultra low loss cables that operate up to 67 GHz. These cables are optimized for consistent and repeatable performance. They provide low attenuation, high shielding effectiveness and a low VSWR. The cables can be used to make cable assemblies with 1 mm, 1.85 mm, 2.4 mm, 2.9 mm, 3.5 mm, Type-N, TNC and SMA connectors.
Download Datasheet | Product Details
RF Amplifier
130 W GaN Power Amplifier from 700 MHz to 6 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP2070C from Exodus Advanced Communications is a solid-state power amplifier that operates from 0.7 to 6 GHz. This class A/AB GaN amplifier produces over 100 watts of power (50 W P1dB) with a gain of over 50 dB. The amplifier provides excellent gain flatness and has optional monitoring parameters for forward/reflected power, voltage, current & temperature sensing.
Download Datasheet | Product Details
Sponsored by SV Microwave
Waterproof Interconnects
IP67 & IP68 Rated Waterproof Interconnects
SV offers a wide range of waterproof interconnect products designed to withstand rigorous environments and harsh elements. SV's line of waterproof adapters include hermetically sealed connectors to 1 x 10-8, making them ideal for high pressure, vacuum applications and the prevention of leakage. Click here to learn more.
 
RF Transistor
30 W LDMOS Power Transistor from 400 to 860 MHz

RF Transistor  from Ampleon

The BLP0408H9S30 from Ampleon is an LDMOS Power Transistor that operates from 400 to 860 MHz. This pulsed CW transistor provides a P1dB of 30 watts with a power gain of 20.2 dB and a drain efficiency of 62%. The device features integrated dual-sided ESD protection circuitry and is available in a plastic package.
Download Datasheet | Product Details
RF Transistor
370 W GaN on SiC HEMT from 2495 to 2690 MHz

RF Transistor  from Wolfspeed, A Cree Company

The GTRA263902FC-V2 from Wolfspeed is a GaN on SiC HEMT that operates from 2495 to 2690 MHz. It provides an output power (P3dB) of 370 Watts with a gain of 15 dB and an efficiency of 70 %. This pulsed device has a pulse width of 10 µs and a duty cycle of 10%. The transistor requires a 48 V supply.
Download Datasheet | Product Details
RF Amplifier
10 KW Solid State Power Amplifier from 2.9 to 3.5 GHz

RF Amplifier  from Empower RF

The 2213 from Empower RF Systems is a Solid State Broadband High Power Amplifier that operates from 2900 to 3500 MHz. This GaN amplifier system uses a multi-drawer integrated subsystem approach to produce over 10,000 Watts of output pulsed power with a gain of 70 dB. It has a pulse width of up to 100 us with a duty cycle of 6%.
Download Datasheet | Product Details
TCVCXO
Voltage Controlled TCXO from 10 to 52 MHz

TCVCXO  from Dynamic Engineers

The TCXO5302BM Series from Dynamic Engineers is a High Precision Voltage Controlled TCXO that operates from 10 to 52 MHz. It has a frequency stability of 0.1 ppm and a phase noise of -154 dBc/Hz at 10 kHz. The TCXO requires a supply voltage of 2.5/3.3 V and provides a CMOS, clipped sinewave output. This RoHS-compliant TCXO is available in a 5 x 3.2 x 1.85 mm ceramic SMD package.
Download Datasheet | Product Details
VCXO
100 MHz VCXO with Sine Output

VCXO  from Greenray Industries

The N623 series from Greenray Industries is a VCXO with 100 MHz oscillation frequency. This VCXO provides a phase noise of -115 dBc/Hz (@ 100 Hz offset) and has a stability of ±15ppm while operating from -40 to 85 degrees celsius. The oscillator provides low g-sensitivity performance, requires a supply voltage of 5 V and provides a Sinewave output.
Download Datasheet | Product Details
Power Divider
4 Way Power Divider from 2 to 18 GHz

Power Divider  from Planar Monolithics Industries

The APD-4-218-LC-2 from PMI RF is a 4 Way power divider that operates from 2 to 18 GHz. The device has an insertion loss of less than 2 dB, isolation of over 16 dB, and can handle up to 10 watts of power. It has an amplitude balance of 0.5 dB and a phase balance of 12 degrees. This 50-ohm power divider is available in a module with SMA (F) connectors.
Download Datasheet | Product Details
Sponsored by SV Microwave
Pre-Tinned Connectors
Prevent Rust & Corrosion with SV’s Pre-Tinned Connectors
SV Microwave’s pre-tinned surface mount and edge launch coaxial PCB connectors provide fast and easy soldering by eliminating a step during installation. These pre-tinned PCB connectors not only prevent rust, corrosion and oxidization, but also increase the durability of the solder joints. Click here to learn more.
 
Power Divider
4 Way Power Divider from 6 to 40 GHz

Power Divider  from MECA

The 804-5-23.000 from MECA is a 4 Way power divider that operates from 6 to 40 GHz. This mm-Wave power divider can handle up to 30 watts of power, has an insertion loss of 2.6 dB and isolation over 13 dB. It is available in a module with 2.4 mm connectors.
Download Datasheet | Product Details
GNSS Module
GPS Multi-Channel Receiver Module for Wearables

GNSS Module  from OriginGPS

The ORG4475 from OriginGPS is a Multi-Channel GPS (1575.42 MHz) Receiver Module with SBAS, QZSS and other regional overlay systems that continuously track all satellites in view, providing real-time positioning data in standard NMEA format. The fully-integrated module uses Noise Free Zone System (NFZ™) technology to offer superior sensitivity, achieving rapid TTFF in less than one second.
Download Datasheet | Product Details
RF Amplifier
1 W Distributed Power Amplifier GaAs MMIC from DC to 10 GHz

RF Amplifier  from Microsemi

The MMA053PP5 from Microsemi is a GaAs pHEMT Distributed Power Amplifier MMIC that operates from DC to 10 GHz. It provides a P1dB of 30 dBm with a gain of 17 dB and has a noise figure of 3.5 dB. The amplifier requires a bias voltage of 10 V and consumes up to 420 mA of current. This RoHS-compliant PA is available in a 32 lead plastic QFN package that measures 5 x 5 mm.
Download Datasheet | Product Details
Block Up Converter
L-Band Block Upconverter from 6.7 to 7.1 GHz

Block Up Converter  from Cross Technologies

The 3115-6771 from Cross Technologies is a Block Upconverter that up-converts an input frequency from 0.95 to 1.35 GHz to an output frequency from 6.7 to 7.1 GHz with a 5.75 GHz local oscillator. The device provides a P1dB of 5 dBm with a gain of 30 dB. The BUC requires a 100 to 240 V AC supply and can be remotely controlled via RS232C/RS485 interfaces.
Download Datasheet | Product Details
RF Module
Stand-alone Wi-Fi Module with Chip Antenna

RF Module  from Amp'ed RF

The WF63 from Amped RF is a stand-alone Wi-Fi Module that supports 802.11b/g/n, 802.11d regulatory domain, and 802.11r standards. It has data rates of up to 4 Mbps using the SPI interface and transmits 23 dBm of output power. This 2.4 GHz RF module includes a 100 MHz Cortex-M4 microprocessor, a chip antenna, 6 general purpose ADC I/O lines and several serial interface options.
Download Datasheet | Product Details
Wireless Charging Transmitter
WPC-Compatible Wireless Power Transmitter for 5W Applications

Wireless Charging Transmitter  from Renesas

The P9235A-RB from Renesas is a Wireless Power Transmitter for 5W applications. The magnetic induction-based transmitter is WPC-compatible and includes an integrated step-down switching regulator, integrated drivers for external power FETs, and an integrated current sense amplifier.
Download Datasheet | Product Details
Antenna
Broadband Omnidirectional Dipole Antenna from 1250 to 2600 MHz

Antenna  from Southwest Antennas

The 1001-246 from Southwest Antennas is a Broadband Dipole Antenna that operates from 1250 to 2600 MHz. This omnidirectional antenna delivers a peak gain of 2.2 dB (@1.8 GHz) and can handle up to 3 watts of input power. The antenna has a horizontal beamwidth of 360 degrees and a vertical beamwidth of 60 degrees.
Download Datasheet | Product Details
Horn Antenna
Corrugated Feed Horn from 24 to 50 GHz for 5G Applications

Horn Antenna  from A-Info

The LB-ACH-28-10-T68-C-2.4F from A-Info is a Corrugated Feed Horn Antenna that operates from 24 to 50 GHz. This dual linear polarized antenna delivers a gain of 10 dBi and has a port-to-port isolation of over 35 dB. This feed horn is available with a 2.4 mm (F) connector and WR 28 waveguide interface and is ideal for use in compact antenna test ranges, reflector antennas, and for various 5G applications.
Download Datasheet | Product Details
RFID Antenna
Short-Range UHF RFID Antenna from 865 to 867 MHz and 902 to 928 MHz

RFID Antenna  from Times-7

The A1115 from Times-7 is a Near Field UHF RFID Antenna that operates from 865 to 867 MHz and 902 to 928 MHz. It enables reliable tag reads within a very constricted read zone. The antenna can handle up to 3 W of power and has a VSWR of 1.95:1. This compact IP54 rated antenna comes with DC grounded anti-static protection.
Download Datasheet | Product Details
RFID Tag
UHF-Band Dry/Wet RFID Inlay from 860 to 960 MHz

RFID Tag  from Alien Technology

The ALN-9940 from Alien Technology is an RFID dry/wet inlay that has been designed for enterprise-wide asset management, volume retail/apparel, warehouse management, and general-purpose asset tagging applications. This UFH band (860 - 960 MHz) RFID Inlay is based on the Higgs™-9 UHF RFID IC “Squiggle” antenna design.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new products, upcoming events, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]