1. everything RF
  2. RF Newsletters
more
PREV 29 April, 2020 NEXT

New RF and Microwave Products this Week

29 April, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 29 April, 2020
 
Sponsored by PCB Directory
 
 
 
New RF and Microwave Products this Week
RF High Pass Filter
Connectorized High Pass Filter from 11 to 40 GHz

RF High Pass Filter  from Mini Circuits

The ZHSS-K11G+ from Mini-Circuits is a Connectorized High Pass Filter with a passband from 11 to 40 GHz and a stopband from DC to 8500 MHz. The device has an insertion loss of less than 2.5 dB and offers rejection of up to 80 dB below the passband. This RoHS-compliant filter is available in a module with 2.92 mm (F) connectors.
Download Datasheet | Product Details
Frequency Synthesizer
250 kHz to 6.7 GHz RF Synthesizer Module

Frequency Synthesizer  from Holzworth Instrumentation

The HSM6001A from Holzworth Instrumentation is an RF synthesizer module that operates from 250 kHz to 6.7 GHz. It is a microwave CW source that is architected on a non-PLL based platform. The digital-analog hybrid design provides excellent phase noise performance and spurious response, which compliments the phase coherent nature of this digital-analog hybrid signal source.
Download Datasheet | Product Details
RF Amplifier
16 W Bi-Directional Amplifier from 225 to 512 MHz

RF Amplifier  from NuWaves Engineering

The NW-BA-VU4GX02 from NuWaves is a Bidirectional VHF/UHF Band Amplifier module that operates from 225 to 512 MHz. It provides a signal gain of 31 dB with a linear RF power of up 4 W watts while operating with 25% power efficiency. The BDA is ideal for extending the communication range of half-duplex transceivers running high peak-to-average waveforms such as OFDM.
Download Datasheet | Product Details
Termination
175 W Low PIM Coaxial Termination from DC to 6.5 GHz

Termination  from API Technologies - Weinschel

The 1479-4 from API Weinschel is a Low PIM Coaxial Termination that operates from DC to 6.5 GHz. It can handle up to 175 watts of average power and 10 kW of Peak Power (5 µs pulse width and a duty cycle of 0.9%). This 50-ohm termination can operate over a wide temperature range from -55 to 125 degrees Celsius and is convection cooled.
Download Datasheet | Product Details
GPS/GNSS Disciplined Oscillator
10 MHz GNSS Disciplined OCXO

GPS/GNSS Disciplined Oscillator  from IQD Frequency Products

The IQCM-112 from IQD Frequency Products is a GNSS Disciplined Oscillator that consists of an OCXO with an integrated GNSS receiver that supports GPS, Glonass, Beidou, and Galileo constellations. The GNSS Disciplined OCXO gives 1 PPS and a 10 MHz output with stability up to 1.5µs over 24 hours using an adaptive algorithm. The OCXO provides a Standard NMEA0183 data output via a serial port.
Download Datasheet | Product Details
DRO
8 GHz Dielectric Resonator Oscillator

DRO  from Synergy Microwave Corporation

The SDRO800-8 from Synergy Microwave is an 8 GHz Dielectric Resonator Oscillator. The DRO has a phase noise of -140 dBc/Hz at a 100 kHz offset. It has a tuning voltage from 1 to 10 V with a tuning sensitivity of 1.5 MHz/V. It requires a supply of 8 V to operate. This DRO delivers an output power of more than 1 dBm and has a harmonic suppression of 34 dBc.
Download Datasheet | Product Details
Antenna
5-in-1 MIMO Antenna for LTE, ISM & GNSS Applications

Antenna  from 2J Antennas

The 2J7050BGFa from 2J Antennas is a 5-in-1 heavy-duty MIMO antenna that has two Cellular/LTE, two 2.4/5.0 GHz ISM, and one GPS/GLONASS/QZSS/Galileo antenna element. The antenna delivers a peak gain of up to 5.6 dBi and can handle an input power of up to 25 watts. This screw mount antenna measures 96 (D) x 90 (H) mm with customizable cables & connectors.
Download Datasheet | Product Details
Sponsored by PCB Directory
 
 
 
RF Variable Attenuator
Voltage Controlled Attenuator from 6 to 12 GHz

RF Variable Attenuator  from ARRA Inc.

The 6752-60D from ARRA is a Voltage Controlled Attenuator that operates from 6 to 12 GHz. It has an attenuation range from 0 to 60 dB with a variation of less than 1.6 dB and insertion loss less than 2.7 dB. The attenuator has a control voltage from 0 to 6 V and requires a supply voltage of ± 12 V. It is available in a module with SMA female connectors.
Download Datasheet | Product Details
RF Variable Attenuator
5-bit GaAs Digital Attenuator MMIC from 0.1 to 30 GHz

RF Variable Attenuator  from Analog Devices

The ADH941S from Analog Devices is a 5-bit GaAs Digital Attenuator MMIC that operates from 0.1 to 30 GHz. It provides a total attenuation of 15.5 dB where the attenuator bit values are 0.5 (LSB), 1, 2, 4, and 8 dB. The attenuator has an insertion loss of less than 4.4 dB (@ 30 GHz) and has an IIP3 of 45 dBm. It has a bit error of ±0.5 dB and can handle 27 dBm of power.
Download Datasheet | Product Details
RF & Microwave Isolator
Coaxial Isolators from 10 MHz to 26.5 GHz

RF & Microwave Isolator  from UIY Inc.

The coaxial isolators from UIY operate from 10 MHz to 26.5 GHz. They have an insertion loss of less than 1.5 dB, isolation of over 14 dB, and can handle up to 500 watts of forward power. These isolators are available in a module with N-type and SMA connectors as standard products and can also be ordered as a custom module. They are suitable for Military, Space & Commercial applications.
Download Datasheet | Product Details
RF Amplifier
0.1 to 4 GHz Wideband Cryogenic Amplifier

RF Amplifier  from AmpliTech

The APTC3-00100400-1200-D4 from AmpliTech is a Wideband Cryogenic Amplifier that operates from 0.1 to 4 GHz. It provides an output power of 8 dBm @ P1dB with a gain of more than 28 dB and has a noise figure of less than 1.2 dB. The device requires a DC supply voltage of 15V and consumes up to 60 mA of current. It is available in a module with coaxial connectors.
Download Datasheet | Product Details
Waveguide to Coax Adapter
WR-12 Waveguide to 1 mm Female Coax Adapter from 60 to 90 GHz

Waveguide to Coax Adapter  from Quantum Microwave

The QMC-WC12-1FR from Quantum Microwave is a WR-12 Waveguide to 1 mm Female Coax Adapter that operates from 60 to 90 GHz. The device has an insertion loss of less than 0.75 dB and a VSWR of under 1.4:1.
Download Datasheet | Product Details
RF Shielded Test Enclosure
RF Shielded Test Enclosure for Applications up to 6 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-1560-A from RF Electronics is an RF Shielded Test Enclosure that can be used to test devices operating up to 6 GHz. It has a thick RF absorbing foam that provides a reflection loss of over 18 dB at 2.4 GHz. The test enclosure has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
Download Datasheet | Product Details
RF Amplifier
2000 W Solid State GaN Power Amplifier from 900 to 930 MHz

RF Amplifier  from RFHIC

The RIM092K0-20 from RFHIC is a high power SSPA that operates from 900 to 930 MHz. This amplifier is based on GaN-on-SiC Transistors and provides an output power of up to 2000 watts with an efficiency of 63% while operating from a 50 V supply. The amplifier is available in a module with connectors and is ideal for CW, ISM, microwave CVD reactors, plasma generators, MW heating, and drying applications.
Download Datasheet | Product Details
Sponsored by PCB Directory
 
 
 
Wireless SoC
Wi-Fi / Bluetooth 5.1 Combo Chipset for Automotive Applications

Wireless SoC  from Qualcomm

The QCA6595AU from Qualcomm is an MU-MIMO Wi-Fi / BT 5.1 Automotive Dual-MAC Combo Chip for Automotive Infotainment and Telematics applications. It supports 802.11ac, 802.11a/b/g, 802.11n, Bluetooth 5.1, and comes with WPA3 wireless security. The SoC is based on Qualcomm aptX™ audio technology and is designed to address surging connectivity demands in vehicles.
Download Datasheet | Product Details
GNSS Module
Multi-GNSS Module with Untethered Dead Reckoning

GNSS Module  from Sierra Wireless

The AirPrime XP2210 from Sierra Wireless is an Untethered Dead Reckoning Multi-GNSS Module for GPS+GLONASS and QZSS Constellations. It enables positioning accuracy of 1.5m and can provide positioning information even in areas with weak GNSS signals or when the GNSS signal is lost for short periods of time. The module has a 1 PPS timing accuracy of +/-20ns.
Download Datasheet | Product Details
RF Tapper
Low PIM Tapper from 350 to 5925 MHz

RF Tapper  from Microlab

The DN-14MFE from Microlab is a Low PIM RF Tapper that operates from 350 to 5925 MHz. This tapper unevenly splits high power cellular signals with a split ratio of 1000:1 and a 30 dB difference between the output ports. It has an innovative asymmetric design that provides excellent input VSWR and coupling flatness across the band.
Download Datasheet | Product Details
Switch Matrix
64 x 64 Switch Matrix for SATCOM Applications from 850 MHz to 2450 MHz

Switch Matrix  from ETL Systems

The Hurricane HUR-10 from ETL Systems is an L-band Distributive Switch Matrix that operates from 850 MHz to 2450 MHz. This matrix can be configured to have up to 64 Inputs and 64 Outputs (64 x 64) with 50-ohm SMA/BNC connectors or 75-ohm F Type/BNC connectors. It can be expanded from an 8x8 setup to a 64x64 setup using 8 blocks.
Download Datasheet | Product Details
Laminate
FR-4 Process Compatible Low-loss Laminate Material

Laminate  from Isola Group

The I-TERA MT40 from Isola Group is a Low-Loss Laminate Material, suitable for many high-speed digital and RF/microwave printed circuit designs. This material has a dielectric constant (Dk) of 3.38 to 3.75 which is stable between -40 Degrees C and 140 Degrees C up to W-band frequencies (75 to 110 GHz). This laminate material offers a very low dissipation factor (Df) of 0.0028 to 0.0035.
Download Datasheet | Product Details
Antenna
GNSS Antenna for L1/L2/L5 Bands

Antenna  from Maxtena

The M8HCT-A-SMA from Maxtena is a GNSS Antenna that supports L1/L2/L5 GPS, Galileo, Beidou, and Glonass bands. The antenna is built using the proprietary Maxtena Helicore technology providing exceptional pattern control, polarization purity and high-efficiency (up to 49%) in a compact form factor. This right-hand circularly polarized antenna delivers a gain of over 0.5 dB and has a VSWR of less than 2:1.
Download Datasheet | Product Details
Antenna
Embedded Dipole Antennas for Cellular IoT, GNSS Applications

Antenna  from Linx Technologies

The RPC Series from Linx Technologies are LTE/LPWA Embedded Dipole Antennas that operate from 617 to 3800 MHz. These Omnidirectional antennas deliver a peak gain of over 3.1 dB with an efficiency of up to 81%. They have a VSWR of less than 2.5:1 and can handle up to 2 watts of input power.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]