1. everything RF
  2. RF Newsletters
more
PREV 6 May, 2020 NEXT

New RF and Microwave Products this Week

6 May, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 6 May, 2020
 
Sponsored by PCB Directory
 
 
 
New RF & Microwave Products this Week
Gain Equalizer
Surface Mount Chip Equalizers from DC to 40 GHz

Gain Equalizer  from Smiths Interconnect

The CEX Series from Smiths Interconnect are High-frequency Chip Equalizers that operate from DC to 40 GHz. These equalizers have a slope compensation range of 1 to 4 dB, a slope linearity at ±0.25 dB, a VSWR of 1.5:1, and a low insertion loss of less than 1.25 dB. The equalizers can handle an input power of up to 0.25W.
Download Datasheet | Product Details
Front End Module
10 W Front-End Module from 2700 to 3000 MHz

Front End Module  from RFHIC

The HR2730-10A from RFHIC is a Front-End Module that operates from 2700 to 3000 MHz. It has been designed for next-generation digital beamforming phased array radar applications. The hybrid device consists of a GaN on SiC transmitter and a duplexer switch at the antenna port that switches between LNA mode and Bypass mode.
Download Datasheet | Product Details
RF Amplifier
Low Noise Amplifier MMIC from 10.7 to 12.7 GHz

RF Amplifier  from Custom MMIC

The CMD320C3 from Custom MMIC / Qorvo is a Low Noise Amplifier MMIC that operates from 10.7 to 12.7 GHz. It provides an output P1dB of 16 dBm with a gain of 18 dB and a noise figure of 1.07 dB. This amplifier requires a 1.5/3 V supply and draws 32 mA of current. It has a 50 ohm matched design which eliminates the need for external DC blocks and RF port matching.
Download Datasheet | Product Details
Vector Network Analyzer
4-Port USB Vector Network Analyzer from 100 kHz to 20 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The C2420 from Copper Mountain Technologies is a 4 port modular vector network analyzer that operates from 100 kHz to 20 GHz. The VNA has a dynamic range of 133 dB and can take measurements at speeds of up to 12 usec/point. It has NMD 3.5 mm Male connectors at each port which are matched to 50 ohms.
Download Datasheet | Product Details
RF Variable Attenuator
Dual Rotary Manually Variable Attenuator from DC to 2.7 GHz

RF Variable Attenuator  from JFW Industries

The 50DR-111 from JFW Industries is a Manually Variable Attenuator that operates from DC to 2.7 GHz. The attenuator has an attenuation range from 0 to 60 dB with 1 dB steps. It is a dual rotary attenuator that can be controlled manually with two rotary knobs that have 1 dB and 10 dB steps. This 50-ohm attenuator has an insertion loss of less than 1.2 dB and has a VSWR of up to 1.5:1.
Download Datasheet | Product Details
Directional Coupler
10 dB Directional Coupler from 50 to 110 GHz for 5G Applications

Directional Coupler  from KRYTAR

The 1500110010 from Krytar is a Directional Coupler that operates from 50 to 110 GHz. This 10 dB coupler has an insertion loss of less than 5.5 dB and directivity of over 7 dB. It can handle 20 watts of average power and 3 kW of peak power. The coupler is available in a module that measures 1.55 x 0.38 x 0.80 inches with standard 1 mm female connectors.
Download Datasheet | Product Details
Cellular Module
LTE-A Cat 12 Module for M2M and IoT Applications

Cellular Module  from Quectel

The EM12-G from Quectel is an LTE Advanced Category 12 Module designed specially for M2M and IoT applications. It delivers a downlink data rate of up to 600 Mbps and an uplink data rate of up to 150 Mbps. This module supports DL 3x carrier aggregation and 256QAM and is compatible with Quectel’s Cat6 module EM06 and future Cat 16 module EM16.
Download Datasheet | Product Details
Featured Article by Huber+Suhner
Phase Stability over Temperature in Microwave Cables
The Relevance of Phase Stability over Temperature in Microwave Cables
Phase stability in microwave cables has become increasingly important in applications where temperature plays an essential role. The challenge is well known in the RF cable industry: PTFE, despite having excellent dielectric properties especially at high frequencies, making it an excellent insulator, also shows a non-linear change in phase when subjected to the 15–25 °C temperature range. Click here to learn more.
 
Up Converter
Multi-Octave RF Upconverter from 2 to 3000 MHz

Up Converter  from NuWaves Engineering

The RF2-3000UCV1 from NuWaves Engineering is a multi-octave RF upconverter that accepts an input signal from 2 MHz to 70 MHz and upconverts it to an output signal from 2 MHz to 3000 MHz with 5 kHz tuning resolution. It provides 50 dB of user-selectable attenuation control and has two IF bandwidth options of 4 MHz and 35 MHz.
Download Datasheet | Product Details
RF Amplifier
2000 W Solid-State Power Amplifier from 80 MHz to 1 GHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 2000W1000D from AR RF/Microwave Instrumentation is a Solid-State Power Amplifier that operates from 80 MHz to 1 GHz. This self-contained, air-cooled amplifier, when used with an RF sweep generator, provides more than 2000 watts of power with a gain of over 63 dB. This amplifier has a Digital Control Panel (DCP) from where the gain and power level can be controlled.
Download Datasheet | Product Details
RF Cable Assembly
65 GHz Cable Assemblies with 1.85 mm, 2.92 mm, and SMPM Connectors

RF Cable Assembly  from Samtec

The RF047-A Series from Samtec are Cable Assemblies that operate up to 65 GHz. These assemblies feature 0.047-inch microwave cables with a bend radius of 10 mm. They have a return loss of less than -16.45 dB and a VSWR of under 1.40:1. These cable assemblies are available with 1.85 mm, 2.92 mm, and SMPM connectors.
Download Datasheet | Product Details
Band Pass Filter
Bandpass Filter from 876 to 925 MHz with Integrated Surge Protection

Band Pass Filter  from NexTek

The BPF-900NFNF from NexTek is a Band Pass Filter with inbuilt surge protection. It has a passband from 876 to 925 MHz with an insertion loss of 0.8 dB and can handle up to 25 watts of power. This filter has a passband return loss of over 20 dB and a band-reject insertion loss of over 60 dB above and below the passband. It provides optimum filtering with a sharp cutoff and notched response.
Download Datasheet | Product Details
Tunable Filter
Digitally-Controlled Tunable Bandpass Filter from 500 to 1000 MHz

Tunable Filter  from K&L Microwave

The D7BT-500/1000-4-N/N-GSI from K&L Microwave is a Digitally-Controlled Tunable Bandpass Filter with passbands from 500 to 1000 MHz and multiple tuning ranges. This 50-ohm filter features a high-performance cavity design with 7 to 9 sections for maximum selectivity. It has an insertion loss of 1.5 dB.
Download Datasheet | Product Details
Frequency Synthesizer
10 MHz to 3 GHz RF Frequency Synthesizer Module

Frequency Synthesizer  from Holzworth Instrumentation

The HSM3001B from Holzworth Instrumentation is an RF synthesizer module that operates from 10 MHz to 3 GHz. It is a microwave CW source that is architected on a non-PLL based platform. The digital-analog hybrid design provides excellent phase noise performance and spurious response, which compliments the phase coherent nature of this digital-analog hybrid signal source.
Download Datasheet | Product Details
RF Amplifier
C-Band Low Noise Amplifier from 4.4 to 5 GHz

RF Amplifier  from AmpliTech

The APT4-04400500-0715-D4-GW from AmpliTech is a C-band Low Noise Amplifier that operates from 4.4 to 5 GHz. It provides an output power of 16 dBm and gain of 35 dB with a noise figure of 0.6 dB. The amplifier requires a supply of 12 V DC. It is available in a module with SMA male/female connectors.
Download Datasheet | Product Details
Sponsored by PCB Directory
 
 
 
Antenna
Adhesive Mount 5-in-1 GNSS, LTE MIMO, and Wi-Fi MIMO Combination Antenna

Antenna  from Taoglas

The MA285.LBICG.001 from Taoglas is a 5-in-1 Combination Antenna that includes one GNSS (GPS-GLONASS-BeiDou), 2 x LTE MIMO, and 2 x dual-band 2.4/5.8GHz Wi-Fi MIMO elements. This low-profile, omnidirectional antenna delivers powerful LTE antenna technology that includes backward compatibility to work for most worldwide 3G and 2G bands.
Download Datasheet | Product Details
Power Sensor
9 kHz to 18 GHz True RMS USB Power Sensor

Power Sensor  from LadyBug Technologies

The LB5918L from Ladybug Technologies is a True RMS Microwave Power Sensor that operates from 9 kHz to 18 GHz. The high sensitivity, high accuracy RF sensor is ideal for EMC applications, general-purpose average power, and scalar measurements. This sensor has a dynamic range from -60 to 26 dBm and can handle a maximum average power of up to 400 mW and 2 W peak power.
Download Datasheet | Product Details
Power Divider
4-Way Reactive Power Splitter from 600 to 2700 MHz

Power Divider  from Innowave RF

The 114-600-2700 from Innowave RF is a 4-Way Reactive Power Splitter that has been designed to evenly split high power signals from 600 to 2700 MHz. It has a passband insertion loss of 0.6 dB and can handle an average power of 300 watts. The device has a low PIM of -163 dBc and a VSWR of less than 1.25:1. Its rugged construction makes it ideal for use in extreme weather and environmental conditions.
Download Datasheet | Product Details
Waveguide to Coax Adapter
WR-10 to 1.0 mm (F) Right Angle Waveguide to Coax Adapter from 75 to 110 GHz

Waveguide to Coax Adapter  from HASCO Components

The HWCA-101F-RA from HASCO is a WR-10 Waveguide to 1 mm Coaxial Adapter that operates from 75 GHz to 110 GHz (W-band). This precision adapter has an insertion loss of less than 0.75 dB, a VSWR of up to 1.4:1. It can handle a CW power of up to 10 W. This waveguide adapter is available with a UG-387/UM flange.
Download Datasheet | Product Details
Low Noise Block
Ku-band PLL Low Noise Block

Low Noise Block  from Actox

The AL9750005 from Actox is a Ku-band PLL Low Noise Block that down-converts an input RF frequency from 10.7 - 11.8 GHz to an IF frequency from 950 - 2050 MHz with a stability of +/- 5 kHz. This LNB has a conversion gain of 55 to 65 dB and has a P1dB of over 5 dBm while operating from a 12 to 24 V supply.
Download Datasheet | Product Details
RFID Tag
UHF RFID Tag from 902 to 928 MHz for Indoor Asset Tracking

RFID Tag  from Vizinex RFID

The EMX-1 (P/N:AST1-082-0001) from Vizinex is a UHF (902-928 MHz) RFID Tag intended for use in indoor environments. It can be used on both metal and non-metal surfaces with a read range of up to 15 feet @ at 36 dBm ERP using an enterprise reader or a Motorola 9190 handheld reader. The tag has an EPC memory of 96-bit and a user memory of 512-bit.
Download Datasheet | Product Details
Wireless Charging Coil
100 W, Qi-compliant Wireless Power Transfer Transmitter Coil

Wireless Charging Coil  from Wurth Elektronik

The 760308101410 from Wurth Electronics is a Qi-compliant Wireless Power Transfer Transmitter Coil with an Inductance of 24 µH and a Q factor of 170 at 125 kHz/10 mA. It has high permeability shielding for wireless charging and supports up to 100 watts of power transfer. This charging coil has a DC resistance of 75mOhms @ 20 degrees C and a self-resonant frequency of 6 MHz.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]