1. everything RF
  2. RF Newsletters
more
PREV 13 May, 2020 NEXT

New RF and Microwave Products this Week

13 May, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 13 May, 2020
 
Sponsored by Digi-Key
 
 
 
New RF and Microwave Products this Week
RF Power Meter
4 kHz to 40 GHz Power Meter with Support for Four USB Sensors

RF Power Meter  from Boonton

The PMX40 from Boonton is an RF Power Meter that operates from 4 kHz to 40 GHz. Its intuitive, multi-touch display enables fast configuration of up to four USB sensors as well as easy access to measurement and analysis tools, providing a standalone solution for capturing, displaying, and analyzing peak and average RF power in both the time and statistical domains.
Download Datasheet | Product Details
RF Module
Low-Cost Bluetooth Low Energy Module for IoT Applications

RF Module  from Dialog Semiconductor

The SmartBond TINY DA14531 from Dialog Semiconductor is a Bluetooth Low Energy Module with an integrated antenna. Based on a Bluetooth 5.1 SoC, this module is optimized to significantly reduce the cost of adding BLE functionality to an IoT system. The module delivers 2.2 dBm of output power and has a sensitivity of -93 dBm. It requires supply from 1.8 to 3.3V.
Download Datasheet | Product Details
Cellular IoT Module
Multi-Band LTE CAT 1 Module for Europe and China

Cellular IoT Module  from SIMCom

The A7670X from SIMCom is a Multi-Band LTE-FDD/ LTE-TDD/GSM/ GPRS/ EDGE Module which supports LTE CAT1 in Europe and China. It is designed for applications that need high throughput data communication in a variety of radio propagation conditions. The module has uplink data rates of up to 5 Mbps and downlink data rates of up to 10 Mbps.
Download Datasheet | Product Details
RF Amplifier
5.9 W GaN Power Amplifier from DC to 6 GHz

RF Amplifier  from Wolfspeed, A Cree Company

The CMPA0060002F1 from Wolfspeed is GaN Broadband Power Amplifier that operates from DC to 6 GHz. It delivers up to 5.9 W of saturated output power with a gain of 12.5 dB and PAE of 39%. The amplifier is available in a flange package that measures 0.5 x 0.5 inches and is suitable for Ultra-broadband amplifiers, fiber drivers, test instrumentation, and EMC amplifier driver applications.
Download Datasheet | Product Details
RF Transistor
250 W LDMOS Power Transistor from 2400 to 2500 MHz

RF Transistor  from Ampleon

The BLP2425M10S250P from Ampleon is an LDMOS Power Transistor that operates from 2400 to 2500 MHz. It provides a P1dB of 250 watts with a power gain of over 13 dB and a drain efficiency of 64%. The transistor requires a 32 V power supply and has been designed for use in RF power amplifiers that operate in the 2.4 GHz ISM Band.
Download Datasheet | Product Details
SATCOM Amplifier System
250 W GaN Power Amplifier for X-band Applications

SATCOM Amplifier System  from KRATOS General Microwave

The SGN-X3-200 from KRATOS General Microwave is a GaN Power Amplifier that operates in the X-band with 9% bandwidth. It delivers peak saturated output power of more than 250W with a large signal gain of 55 dB and an efficiency of 20%. This solid-state amplifier has a pulse width of 256 µs, a rise/ fall time of 50ns, and a duty cycle of 15%.
Download Datasheet | Product Details
RF Amplifier
2.2 KW Solid State GaN Power Amplifier from 1 to 2.5 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP2041-1 is a solid state GaN power amplifier from Exodus that operates from 1 to 2.5 GHz. It provides an output power of more than 2.2 KW with a gain of over 63 dB. The amplifier has an ultra-wide instantaneous bandwidth and is suitable for linear CW and composite signal modulation standards & applications. It is available in a 32U rack cabinet with N-type female connectors.
Download Datasheet | Product Details
Sponsored by Digi-Key
SMA Quick-Connect Coaxial Adapter
Amphenol RF SMA Quick-Connect Coaxial Adapters Available Now from Digi-Key
The SMA quick-connect adapter offers excellent electrical performance through 18 GHz. With a unique push-turn thread on, pull-off style of coupling, the in-series adapter easily converts standard SMA plug test cables into quick-connect cables without compromising assembly electrical integrity. Click here to learn more.
 
Antenna
4G LTE/3G/2G Ultra Wideband Antenna

Antenna  from 2J Antennas

The 2JW0124z-C868B from 2J Antennas is an ultra-wideband antenna solution for worldwide cellular applications. It has been designed to support 4G, 3G, and 2G standards, including GSM, CDMA, DCS, PCS, GPRS, WCDMA, UMTS, HSPA, EVDO, and LTE technologies, covering all cellular bands ranging from 698-960, 1710-2170 and 2500-2700 MHz.
Download Datasheet | Product Details
Antenna
Flexible Embedded Antenna for WiFi 6E

Antenna  from Linx Technologies

The ANT-W63-FPC-UFL-100 from Linx Technologies is a Flexible Embedded Multiband Antenna for 6 GHz WiFi 6E (5.925 GHz to 7.125 GHz) and 2.4 /5 GHz WiFi/WLAN applications. It provides a peak gain of over 6.1 dBi and can handle up to 2 watts of power. This linearly polarized antenna provides an omnidirectional radiation pattern with up to 80% efficiency.
Download Datasheet | Product Details
Fixed Attenuator
0 to 30 dB Bi-directional Attenuators from DC to 18 GHz

Fixed Attenuator  from Mesa Microwave

The MMC-CA-DC18-2-S-XX from Mesa Microwave is a Bi-directional Attenuator that operates from DC to 18 GHz. It is available in attenuation values from 0 to 30 dB and has a VSWR of up to 1.35:1. The attenuator can handle up to 2 W of power and is available with SMA (M/F) connectors.
Download Datasheet | Product Details
Block Up Converter
SOSA-Aligned Microwave Dual Upconverter for EW Applications

Block Up Converter  from Mercury Systems

The SpectrumSeries RFM3103s from Mercury Systems is a SOSA-Aligned Microwave Dual Upconverter designed for electronic warfare (EW) applications. It upconverts an IF frequency from 1.375 to 2.375 GHz to an RF frequency from 6 to 8 GHz. It provides an OP1dB of 30 dBm with a gain of 21 dBm and a noise figure of 23 dB.
Download Datasheet | Product Details
Digital Phase Shifter
8-Bit Digitally Controlled Phase Shifter from 32 to 37 GHz

Digital Phase Shifter  from Planar Monolithics Industries

The PS-360-3237-8-292FF from PMI RF is a High Speed, 8-Bit Digitally Controlled Phase Shifter that operates from 32 to 37 GHz. This phase shifter offers a total phase shift range of 358.593 degrees having a step size of 1.406 Degree and switches between states in less than 500 ns. It has a high level of accuracy with an amplitude error of ±1.5 dB and a phase shift error of ±1.3°.
Download Datasheet | Product Details
Power Divider
30 W, 2-Way Power Divider from 2 to 18 GHz

Power Divider  from MECA

The 802-2-10.000 from MECA is a 2-Way Power Divider that operates from 2 to 18 GHz. It has an insertion loss of less than 1 dB, isolation of over 17 dB, and can handle up to 30 watts of average power. The device has an amplitude balance of 0.3 dB, a phase balance of up to 5-degrees, and an I/O VSWR of less than 1.50:1.
Download Datasheet | Product Details
Front End Module
Dual 2.4 GHz Wi-Fi Front-End Module

Front End Module  from Skyworks Solutions

The SKY55242-11 from Skyworks is a dual 2.4 GHz Front-End Module (FEM) that supports simultaneous 2 x 2.4 GHz Wi-Fi including Bluetooth. It has two separate 2.4 GHz chains - each chain has a dedicated coupler and BT port. This highly-integrated module incorporates a 2.4 GHz power amplifier, a 2.4 GHz low noise amplifier with bypass and an SP3T transmit/receive switch.
Download Datasheet | Product Details
Sponsored by Digi-Key
High-Frequency, SMA End Launch Connectors
Amphenol RF High-Frequency SMA End Launch Connectors Available from Digi-Key
The high-frequency SMA end launch connector offers excellent VSWR performance up to 26.5 GHz. Featuring an optimized end launch design with either through-hole legs or traditional slide-on mounting legs, the connector is an ideal PCB connector solution for high-frequency applications. Click here to learn more.
 
Wireless SoC
2.5/5 GHz WLAN + Bluetooth SoC for IoT Applications

Wireless SoC  from NXP Semiconductors

The 88W8977 from NXP is a WLAN (2.4/5 GHz) and Bluetooth System-on-Chip (SoC) that has been specifically designed to support the speed, reliability, and quality requirements of next-generation products. It provides both simultaneous and independent operation of the IEEE 802.11n compliant 1x1 spatial stream and Bluetooth v4.2.
Download Datasheet | Product Details
OCXO
10 MHz OCXO Available in Ultra-Compact 7x5 mm Package

OCXO  from Rakon

The ROM7050PA from Rakon is a compact OCXO with an oscillation frequency of 10 MHz. It has a very small 7x5 mm footprint and meets the stringent requirements of 5G Remote Radio Head (RRH), small cell, optical network, and microwave transmission system applications. It provides a CMOS waveform (1ns, 55%) at the output while operating from a supply voltage of 3.3 V.
Download Datasheet | Product Details
DRO
1 to 36 GHz Space Qualified Dielectric Resonator Oscillator

DRO  from Microwave Dynamics

The DRO-1087 from Microwave Dynamics is a Space Qualified Dielectric Resonator Oscillator (DRO) that can be configured to operate at a single frequency from 1 to 36 GHz. It is factory tuned to a specific frequency value and has a tuning range of +/-2 MHz using a 0 to 12 tuning voltage. The free-running DRO provides an output power of up to 13 dBm and has a phase noise of -90 dBc/Hz @ 10 kHz offset.
Download Datasheet | Product Details
RF Shielded Test Enclosure
Stand Alone RF Tunnel Shielded Box from 20 MHz to 6 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-3590 from RF Electronics is a Stand Alone RF Tunnel Shielded Box that operates from 20 MHz to 6 GHz. This fully portable design is equipped with caster wheels for ease of movement. The interior of this enclosure measures 650 mm (W) X 650 mm (H) X 2050 (L). It has a thick RF absorbing foam that provides isolation of more than 120 dB @ 3 GHz.
Download Datasheet | Product Details
Voltage Controlled Oscillator
12.2 GHz Surface Mount Voltage Controlled Oscillator

Voltage Controlled Oscillator  from Z-COMM

The DRO12200A from Z-Comm is a VCO that operates at 12.2 GHz. It delivers 3 dBm of output power into a 50 Ohm load with a low phase noise of -105 dBc/ Hz @ 10 kHz offset. The VCO has a tuning voltage range from 0 to 12 Vdc with a sensitivity of 0.5 MHz/V. It features a 2nd harmonic suppression of -35 dBc and consumes 23 mA of current while operating from a 5 Vdc supply.
Download Datasheet | Product Details
RF Amplifier
100 W Solid State Power Amplifier from 32 to 38 GHz

RF Amplifier  from Polarity

The P100W32-38CWP from Polarity is a Solid State Power Amplifier that operates from 32 to 38 GHz. It provides a saturated output power of 100 watts with a small signal gain of over 52 dB. The amplifier has a pulse width of over 100 ns and a duty cycle of up to 100 %. It is available in a rack-mount package with a 2.92 mm (F) connector at the input and a WR28 waveguide interface at the output.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]