1. everything RF
  2. RF Newsletters
more
PREV 20 May, 2020 NEXT

New RF and Microwave Products this Week

20 May, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 20 May, 2020
 
Sponsored by Qorvo
 
 
 
New RF and Microwave Products this Week
RF Switch
SP25T Non-Reflective Switch Matrix From 0.5 to 18 GHz

RF Switch  from American Microwave Corporation

The MSN-0518-25T-30DB-HERM-1JV from American Microwave Corporation is an SP25T Switch Matrix that operates from 0.5 to 18 GHz (can be extended up to 40 GHz). This non-reflective absorptive switch has an insertion loss of less than 10 dB, isolation of over 60 dB, and a switching time of less than 2 us.
Download Datasheet | Product Details
RF Amplifier
50 W Solid State Power Amplifier from 0.8 to 2 GHz

RF Amplifier  from NuWaves Engineering

The NW-PA-13G05A is a GaN solid state power amplifier that operates from 800 to 2000 MHz. It has an output saturated power of 35 W, with a gain of 40 dB and efficiency greater than 40%. The Power Amplifier is available in an aluminum chassis which provides improved heat dissipation characteristics for higher-temperature operation.
Download Datasheet | Product Details
RF Amplifier
40 W Solid State Amplifier from 6 to 18 GHz

RF Amplifier  from AR RF/Microwave Instrumentation

The Model 40S6G18-L from AR RF/Microwave Instrumentation is a portable, self-contained, liquid-cooled, broadband, Class A solid-state amplifier that operates from 6 to 18 GHz. This amplifier provides an output power of 40 watts with a power gain of 46 dB. It is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier.
Download Datasheet | Product Details
RF Amplifier
Cascadable Broadband InGaP MMIC Amplifier from DC to 10 GHz

RF Amplifier  from Teledyne e2v HiRel Electronics

The DGB010 from Teledyne e2v Hirel Electronics is a Cascadable Broadband InGaP MMIC Amplifier that operates from DC to 10 GHz. This 50-ohm gain block is based on a mature and reliable Heterojunction Bipolar Transistor (HBT), Indium Gallium Phosphide (InGaP) process, and utilizes proprietary MMIC design techniques.
Download Datasheet | Product Details
RF Test Set
9 kHz to 6 GHz Software-defined RF Signal Tester

RF Test Set  from Averna

The AST-1000 from Averna is an RF Test Set designed for Radio, Navigation, Video, and Connectivity testing in the automotive sector. This system can generate all common radio signals (including AM/FM, DAB, DRM, HD Radio, and Sirius/XM), digital video signals (including ATSC, CMMB, DVB-T2, and ISDB) and GNSS signals (including BeiDou, Galileo, GLONASS, GPS, HIL Simulation, and QZSS).
Download Datasheet | Product Details
Vector Network Analyzer
2-Port USB Controlled VNA from 300 kHz to 9 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The SC5090 from Copper Mountain Technologies is a modular 2-port compact VNA for 2-path measurements that operates from 300 kHz to 9 GHz. It has a dynamic range of 140 dB, an output power of 15 dBm, and typical measurement speed of 16 µs per point. The VNA has a directivity of 46 dB and can be used to measure all four S parameters (S11, S21, S12, and S22).
Download Datasheet | Product Details
Phase Noise Analyzer
10 MHz to 26 GHz Real-Time Phase Noise Analyzer

Phase Noise Analyzer  from Holzworth Instrumentation

The HA7062D from Holzworth is a real-time phase noise analysis system that operates from 10 MHz to 26 GHz (optional to 40 GHz). It provides measurement offsets from 0.1 Hz to 100 MHz. It is available in a fully shielded, fan-less 1U chassis that completely eliminates ground loops and troublesome microphonics for uncompromised performance and repeatability.
Download Datasheet | Product Details
Sponsored by Qorvo
Aerospace and Defense Applications
Qorvo RF Solutions that Connect and Protect™ for Aerospace and Defense Applications
Qorvo® helps customers overcome their toughest design challenges in aerospace and defense applications. Our MMIC design experience, portfolio of GaN/GaAs solutions combined with our extensive knowledge of the entire RF/microwave signal chain enable us to make your next system design a reality. To find out how Qorvo solutions are All Around You®, visit www.qorvo.com
 
RF Variable Attenuator
50 W Solid-State Attenuator from 915 to 960 MHz

RF Variable Attenuator  from JFW Industries

The 50P-1091 from JFW Industries is a Solid-State Programmable Attenuator that operates from 915 to 960 MHz. It has an attenuation range from 0 to 3 dB with a step size of 1 dB and a switching speed of 100 microseconds. This TTL-controlled attenuator has an insertion loss of less than 0.9 dB and can handle up to 50 W of input power.
Download Datasheet | Product Details
TCXO
10 to 52 MHz High Precision Extended Temperature TCXOs

TCXO  from Dynamic Engineers

The TCXO7502BM Series from Dynamic Engineers are High Precision Extended Temperature TCXOs that operate from 10 to 52 MHz. They have a control voltage of 0.5 to 2.5 V, frequency stability of 0.1 ppm, and phase noise of -156 dBc/Hz at 10 kHz. These TCXOs require a supply voltage of 2.5/3.3 V and provide a CMOS or clipped sinewave output.
Download Datasheet | Product Details
General Crystal Oscillator
Radiation Tolerant Crystal Oscillators with Multiple Outputs from 20 to 200 MHz

General Crystal Oscillator  from Q-Tech Corporation

The QT625 Series from Q-Tech Corporation are Radiation Tolerant Hybrid SAW Crystal Oscillators that operate from 20 to 200 MHz. They have up to 4 CMOS outputs in a single package so it can save valuable space and costs. The oscillators require a supply voltage of 2.5 V or 3 V and provide exceptional frequency and temperature stability for space satellite and aerospace applications.
Download Datasheet | Product Details
RF Amplifier
20 W Solid State High Power Amplifier from 1 to 18 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP2120-2 from Exodus is a Solid State Power Amplifier that operates from 1 to 18 GHz. This hybrid MMIC amplifier provides 20 watts of output power with a power gain of over 43 dB. It can be used for all single channel modulation standards and has been designed for broadband EMI/RFI, Lab, Comm. and EW applications.
Download Datasheet | Product Details
GNSS Module
GNSS Module for Responsive Navigation and Difficult Conditions

GNSS Module  from Wurth Elektronik

The Erinome-II from Würth Elektronik is a GNSS Module that supports four major GNSS constellations (GPS, GLONASS, Galileo, and BeiDou) for fast and accurate positioning. The connection of an external antenna can be made through an RF pad. This module is based on Qualcomm SirfStar V 5e chipset and features standard NMEA + chipset-specific communication protocols.
Download Datasheet | Product Details
RF Module
Compact Bluetooth 5.0 Module for IoT Applications

RF Module  from Fujitsu

The FWM7BLZ20B from Fujitsu is a Bluetooth 5.0 module for IoT applications that can connect with up to 8 peripherals simultaneously. It is based on the low power nRF52832 Nordic chipset and supports a data rate of up to 2 Mbps. It provides an output power of 4 dBm and has a receive sensitivity of -94 dBm.
Download Datasheet | Product Details
RF Module
Wi-Fi and Bluetooth 4.2 Combo Module

RF Module  from Sierra Wireless

The BX3100 from Sierra Wireless is a Wi-Fi and Bluetooth Combo Module that supports 802.11 b/g/n and dual-mode Bluetooth Classic and Bluetooth Low Energy (BLE). It is ideal for industrial applications that require a secure Wi-Fi and Bluetooth connection. It has a data rate of up to 100 Mbps and comes with Embedded TCP/IP and Bluetooth Stacks.
Download Datasheet | Product Details
Sponsored by Qorvo
 
 
 
RF Amplifier
X-band GaN Power Amplifier from 8 to 12 GHz

RF Amplifier  from Qorvo

The QPA2611 from Qorvo is an X-band GaN Power Amplifier that operates from 8 to 12 GHz. It delivers more than 5 W of saturated output power with a large signal gain of 26 dB, and PAE of more than 42%. This amplifier has an input return loss of more than 12 dB and an output return loss of over 15 dB. The amplifier is fabricated using Qorvo’s 0.15 um GaN on SiC process.
Download Datasheet | Product Details
Block Up Converter
12 W Ka-Band Block Upconverter for VSAT Applications

Block Up Converter  from Norsat

The ELMTBKA012-CN from Norsat International is a Ka-Band Block Upconverter for VSAT applications. This BUC upconverts an input frequency from 1150 to 2150 MHz to an output frequency from 29 to 30 GHz. It provides an output power of 12 watts with a noise power density of -70 dBm/Hz in Tx and -157 dBm/Hz in Rx.
Download Datasheet | Product Details
RF Amplifier
40 W Power Amplifier Module from 5.25 to 5.85 GHz

RF Amplifier  from RFcore

The RCA5259H46D0 from RFCore is an RF Amplifier module that operates from 5.25 to 5.85 GHz. It provides a saturated output power of over 40 W CW with a small signal gain of 47 dB and a large signal gain of 44 dB. The amplifier requires a 28 V DC supply and consumes 3.8 A of current while providing 20 W of power and 6 A when providing 40 W of power.
Download Datasheet | Product Details
Tower Mount Amplifier
Tower Top Low Noise Amplifier from 370 to 400 MHz with Receiver Protection

Tower Mount Amplifier  from dbSpectra

The ATS3TMA4-R from dbSpectra is a Tower Top Amplifier with a built-in Quadrature Amplifier and a receive bandpass filter for receiver protection. This Tower Top Low Noise Amplifier module operates from 370 to 400 MHz (UHF-band) and provides a gain of 14 dB with a noise figure of less than 5.5 dB. It also provides surge suppression of 18 kA as per the ANSI c62.18/20 standard.
Download Datasheet | Product Details
Antenna
Triple-Band Helical GNSS Antenna for L1/L2/L5 Bands

Antenna  from Tallysman Wireless

The HC977 for Tallysman is a Helical Antenna covering the GPS/QZSS-L1/L2/L5, GLONASS-G1/G2/G3, Galileo-E1/E5a/E5b, BeiDou-B1/B2/B2a frequency bands, as well as L-band correction services. This antenna provides a gain of 28 dB when surface mounted or screw-mounted and has an axial ratio of less than 0.5 dB.
Download Datasheet | Product Details
Directional Coupler
20 dB Directional Couplers from 450 to 2700 MHz

Directional Coupler  from Bird

The DC-450/2700-50 Series from Bird are Directional Couplers that operate from 450 to 2700 MHz covering Analog/P25/2G/3G/4G/LTE Bands. They are available in different coupling configurations of up to 20 dB and provide an insertion loss of less than 2.1 dB with 32 dB of isolation. The couplers can handle 300 watts of average power and have a PIM of less than -153 dBc.
Download Datasheet | Product Details
Directional Coupler
20 dB Directional Coupler from 0.5 to 20 GHz

Directional Coupler  from Amtery

The CP10020A-20 from Amtery is a Directional Coupler that operates from 0.5 to 20 GHz. It has a coupling of 20 dB, directivity of over 15 dB, and an insertion loss of less than 1.7 dB. This RoHS-compliant coupler can handle up to 20 watts of average power and is available in a module with SMA female connectors.
Download Datasheet | Product Details
RF Shielded Test Enclosure
Forensics RF Test Enclosure with Audio/ Video Recording

RF Shielded Test Enclosure  from Ramsey Electronics

The STE3000FAV2 from Ramsey is an RF Test Enclosure designed for forensics visual and hands-on interrogations of electronic devices. The system also supports electronic video/audio/timestamp recording of the entire interrogation process. This test enclosure has built-in internal LED illumination, which allows seeing the device placed inside the enclosure.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, upcoming events, articles, white papers and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]