1. everything RF
  2. RF Newsletters
more
PREV 27 May, 2020 NEXT

New RF and Microwave Products this Week

27 May, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 27 May, 2020
 
Sponsored by Copper Mountain
 
 
 
Latest RF & Microwave Products this Week
Band Pass Filter
28 GHz Surface Mount Bandpass Filter for 5G Applications

Band Pass Filter  from Knowles

The B280LA0S from Knowles is a Band Pass Filter with a passband from 27.5 to 28.5 GHz. It has an insertion loss of less than 4.5 dB and provides rejection of over 30 dB above (30 to 37 GHz) and below (DC to 26.1 GHz) the passband. The filter uses DLI’s low loss temperature stable materials which enable it to offer a small size and minimal performance variation over temperature ranging from -55°C to +125°C.
Download Datasheet | Product Details
RF Variable Attenuator
Temperature Variable Chip Attenuators from DC to 6 GHz

RF Variable Attenuator  from Smiths Interconnect

The AN7 Thermopad Series from Smiths Interconnect are Temperature Variable Chip Attenuators that operate from DC to 6 GHz. The Thermopad is a totally passive absorptive microwave attenuator, which provides power dissipation that varies with temperature. The device can be used in any application that requires a known amount of attenuation change for a particular temperature shift.
Download Datasheet | Product Details
RF Amplifier
18 to 40 GHz Low Noise Amplifier for Military & Space Applications

RF Amplifier  from AmpliTech

The APT4-18004000-4008-D20-N from AmpliTech is a Low-Noise Amplifier that operates from 18 to 40 GHz. It provides a P1dB of 8 dBm with a gain of 40 dB and a noise figure of 3 dB. Constructed for MIL-883 and MIL-45208 standards, this amplifier has been designed on a state-of-the-art PHEMT process and has good gain flatness across the band.
Download Datasheet | Product Details
RF Amplifier
1000 W Solid-State Amplifier from 80 to 1000 MHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 1000W1000G from AR RF/Microwave Instrumentation is a self-contained, air-cooled, solid-state amplifier that operates from 80 to 1000 MHz. When used with a sweep generator, it provides over 1000 Watts of CW output power and a gain of more than 60 dB with a noise figure of 6 dB. This amplifier has been developed for applications where instantaneous bandwidth, high gain, and linearity are required.
Download Datasheet | Product Details
RF Cable
Ultra-Flexible Test Cables from 0.3 to 32 GHz

RF Cable  from MegaPhase

The Killer Bee from MegaPhase are Ultra Flexible Test Cables that operate from 0.3 to 32 GHz. These cables have a shielding effectiveness of 110 dB and a VSWR of less than 1.40:1. They can be used with 3.5 mm, 2.92 mm, 2.4 mm, SMA, Type N, TNC, and 7-16 connectors to create cables assemblies.
Download Datasheet | Product Details
RF Variable Attenuator
8-bit Digitally Controlled Attenuator from 0.5 to 18 GHz

RF Variable Attenuator  from Akon Inc

The A50-MH009 from Akon is an 8-bit Digitally Controlled Attenuator that operates from 0.5 to 18 GHz. The device provides attenuation from 0 to 64 dB in 0.25 dB steps and has a digital TTL logic control. It has an insertion loss of 4.5 dB, switching speed of less than 650 ns, and can handle up to 20 dBm of input power.
Download Datasheet | Product Details
Sponsored by Copper Mountain
RNVNA Multiport Testing Solution
New Multiport Scalar Testing Solution – Perfect for 5G and MIMO Antenna
Copper Mountain Technologies RNVNA is a customizable multiport network analysis solution for MIMO antennas & 5G applications. It links up to 16 analyzers to measure vector reflection & scalar transmission parameters. RNVNA is compatible with all CMT 1-Port VNAs with frequency up to 18 GHz. Click here to learn more.
 
RF Variable Attenuator
60 dB Voltage Controlled PIN Attenuator from 6 to 12 GHz

RF Variable Attenuator  from UMCC

The AG-Q000-HV from UMCC is a Voltage Controlled PIN Attenuator that operates from 6 to 12 GHz. It provides attenuation of up to 60 dB which can be controlled by a voltage range from 0 to 6 V, where each 1 V rise results in 10 dB of attenuation. The device has an insertion loss of less than 2.5 dB and a VSWR of under 1.5:1. It can handle up to 20 dBm of average/peak power.
Download Datasheet | Product Details
RF Switch
DC to 18 GHz TTL-Controlled Coaxial SPDT Switch

RF Switch  from Logus Microwave

The TOTC12EMF2X128 from Logus Microwave is a Coaxial SPDT Switch that operates from DC to 18 GHz. This TTL-controlled switch has an insertion loss of less than 0.4 dB with isolation of over 80 dB and a switching time of 15ms. It can handle an input power of up to 100 W. The switch requires a 28 V supply and draws 300 mA of current. It is available in a module with SMA female connectors.
Download Datasheet | Product Details
Block Up Converter
X-band GaN Block Upconverter from 7.9 to 8.4 GHz

Block Up Converter  from Communications & Power Industries

The SB47XOA from CPI is an X-band GaN Block Upconverter for satellite uplink applications. It upconverts an input frequency from 950 to 1450 MHz to an output frequency from 7.9 to 8.4 GHz with a 6.95 GHz local oscillator. The device provides 50W of saturated output power (25W linear) with a gain of 70 dB. It can operate using either AC (90 to 264 V) or DC (40 to 60) voltage options.
Download Datasheet | Product Details
DC Block
Inner DC Block from 250 kHz to 40 GHz

DC Block  from MECA

The 500-1K from MECA is an Inner DC Block that operates from 250 kHz to 40 GHz. The DC block provides an insertion loss of less than 1.25 dB and an Input/Output VSWR of up to 1.65:1. This connectorized DC Block has 2.92 mm M/F connectors with a breakdown voltage of 75 V and can handle up to 10 Watts of average power.
Download Datasheet | Product Details
Antenna
2.4/5.0 GHz Dual-Band Wi-Fi Antenna

Antenna  from 2J Antennas

The 2J0202-C638 from 2J Antennas is a Dual-Band Wi-Fi Antenna that operates from 2410 to 2490 MHz and 4920 to 5925 MHz. It supports WiFi, Sigfox, LoRa, LPWA, BT, ZigBee, RFID, and ISM. This Omni-directional antenna delivers a peak gain of up to 2.6 dBi with an efficiency of over 25.7%. The device has a VSWR of less than 3.8:1 and can handle up to 25 watts of power.
Download Datasheet | Product Details
Antenna
Off-board UWB PCB Antenna from 6 to 8.5 GHz

Antenna  from Ethertronics

The 1005193 from Ethertronics is a PCB Antenna optimized for UWB applications from 6 to 8.5 GHz where off-board implementation is advantageous and necessary. This versatile antenna provides a peak gain of over 6 dBi with 80% efficiency and can handle up to 10 watts of power. It is suitable for embedded designs, radars, gateways, access points, handhelds, telematics, tracking, healthcare, M2M, industrial devices, smart grid, and OBD-II applications.
Download Datasheet | Product Details
Sponsored by Copper Mountain
 
 
 
RFID Antenna
Single Port RFID Antenna from 865 to 956 MHz

RFID Antenna  from Zebra

The AN480 from Zebra is an RFID Antenna that operates from 865 to 956 MHz. This single-port antenna can be installed throughout an enterprise in manufacturing and warehouse floor environments or any dock door receiving application. It has a 3 dB beamwidth of 65-degrees in both the planes and can handle up to 2 watts of power.
Download Datasheet | Product Details
GNSS Module
Ultra-Low Power Multi-GNSS Module with UART and I2C Interfaces

GNSS Module  from Sierra Wireless

The XS1110 from Sierra Wireless is an Ultra-Low-Power Multi-GNSS Module that supports tracking of GPS+Glonass, GPS+BeiDou, or GPS+Galileo satellite combinations to deliver superior positioning accuracy within 1.5 m. It has a tracking sensitivity of -161 dBm and has 15+ SDK commands to change default GNSS behavior and enable extended features.
Download Datasheet | Product Details
RF Capacitor
0.5 to 2700 pF High-Q Low ESR Ceramic Capacitor

RF Capacitor  from Passive Plus Inc

The 2225C/P from Passive Plus is a High-Q Low ESR Ceramic Capacitor with a capacitance value of 0.5 to 2700 pF, a working voltage (WVDC) of 2500 to 3600 V, and a Q-factor of more than 10,000 @ 1MHz. The dielectric of this capacitor can withstand a voltage of up to 250% of the working voltage for 5 seconds. It is 100% RoHS compliant and is available with microstrip, axial ribbon, radial wire, or axial wire terminations.
Download Datasheet | Product Details
RF Shielded Test Enclosure
RF Shielded Test Enclosure from 20 MHz to 6 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-S870 from RF Electronic is an RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. It has a thick RF absorbing foam that provides an isolation of more than 90 dB. The enclosure has shielded power filters for providing power connections in the box while blocking all wireless signals. It has a number of I/O interface options that include HDMI, RJ45, USB, DB9, VGA, DB25, and AC/DC.
Download Datasheet | Product Details
Power Divider
8-Way Resistive Power Divider/Combiner from DC to 7.2 GHz

Power Divider  from JFW Industries

The 50PD-871 from JFW is an 8-Way power divider/combiner that operates from DC to 7.2 GHz. It can handle average input power of up-to 1 W and has an insertion loss of less than 20 dB with a VSWR of 1.6:1. The divider is designed with a symmetrical star layout so that all paths have equal losses. It is available in a module with SMA Female connectors and is suitable for applications such as Wi-Fi 6E testing.
Download Datasheet | Product Details
RF & Microwave Circulator
100 W Drop-In Circulator from 860 to 960 MHz

RF & Microwave Circulator  from VidaRF

The VDC-086096 from VidaRF is a Drop-In Circulator that operates from 860 to 960 MHz. It has an insertion loss of 0.5 dB and an isolation of 20 dB. The circulator can handle up to 100 watts of forward power, 500 watts of peak power, and has a VSWR of less than 1.25:1. This RoHS-compliant circulator is available in a module that measures 25.4 x 25.4 x 7.62 mm with connectors.
Download Datasheet | Product Details
RF Mixer
13 to 21 GHz Sub-Harmonically Pumped Mixer

RF Mixer  from Custom MMIC

The CMD303C3 from Custom MMIC is a Sub-Harmonically Pumped Mixer that can be used as an upconverter or downconverter. It has an RF frequency from 13 to 21 GHz and an IF frequency from 7.5 to 10.5 GHz. This mixer has an LO to RF isolation of 22 dB, a conversion loss of 10 dB, and an input IP3 of 13 dBm.
Download Datasheet | Product Details
RF Mixer
2 to 18 GHz GaAs Surface Mount MMIC IQ Mixer

RF Mixer  from Marki Microwave

The MMIQ-0218HSM from Marki Microwave is a Passive GaAs MMIC IQ Mixer with an RF/ LO frequency from 2 to 18 GHz and an IF frequency from DC to 3 GHz. This broadband mixer has a conversion loss of 8 dB and LO to RF isolation of 53 dB. It provides up to 35 dB of image rejection due to the excellent phase and amplitude balance of an on-chip LO quadrature hybrid.
Download Datasheet | Product Details
Termination
30 W Termination from DC to 9 GHz

Termination  from Radiall

The R404759000 from Radiall is an RF Termination that operates from DC to 9 GHz. It can handle up to 30 watts of average power and 2 kW of Peak Power (1µs pulse width and a duty cycle of 10%). This 50-ohm termination has a DC resistance of 50 ohms and can operate over a temperature range from -55 to 125 degrees Celsius. It can be cooled using both free air and the conduction method.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, upcoming events and webinars, white papers, articles and more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]