1. everything RF
  2. RF Newsletters
more
PREV 3 September, 2014 NEXT

New RF & Microwave Products this Week

3 September 2014 - everything RF Newsletter
 
everything RF
Date: 3 September 2014
 
New Cable Assembly Builder Tool
 
 
 
New RF & Microwave Products this Week
GPS/GNSS Antenna
GPS/GLONASS High Rejection External Antenna

GPS/GNSS Antenna from PCTEL

The 8171D-HR-DH-W from PCTEL is a dual band antenna that covers the GPS L1 band (1575.42 Mhz) and the GLONASS L1 Band (1602 MHz) frequencies. The antenna has a gain of 26 dB, noise figure of less than 2 dB and requires a supply voltage from 2.8 to 6 V while drawing less than 25 mA of current.
 
Download Datasheet | Product Details
 
RF Connector
DC to 4 GHz Type F Connectors (75 Ohms) for CATV Applications

RF Connector from MOLEX

The Type F RF Connector Series from MOLEX operate from DC to 2 GHz with some high performance 4 GHz options also available. These connectors have a nominal impedance of 75 Ohms and are used in video applications for CATV. The connectors have a 500 Vrms rating and can operate at temperatures from -40 to 165 degrees C.
 
Download Datasheet | Product Details
 
RF Connector
4.1/9.5 Mini DIN Series of Low PIM Connectors for Communication Systems

RF Connector from Delta Electronics Manufacturing Corp.

The 4.1 / 9.5 Mini DIN series of coaxial connectors from Delta Electronics have been designed for high performance mobile communications systems. These are mechanically similar to the 7/16 series, however the 4.1/9.5 Mini DIN’s 30% smaller size and reduced weight, allow increased package density and flexibility in system design.
 
Download Datasheet | Product Details
 
Antenna Analyzer
Compact Pocket-Sized Cable & Antenna Analyzer from 85 MHz to 4 GHz

Antenna Analyzer from Bird Technologies

The SiteHawk Antenna and Cable Analyzer from Bird Technologies operates from 85 MHz to 4 GHz. It is a compact pocket-sized analyzer with inbuilt storage and a simple user interface. The analyzer can be used to test Cellular, PCS/DCS, LTE, CDMA, GSM, WLAN, 3G, Military and a number of other signals.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
4/6 GHz Handheld Analyzer - VNA, Cable/Antenna Analyzer & Spectrum Analyzer

Vector Network Analyzer from Keysight Technologies

The N9912A FieldFox Handheld RF Combination Analyzer is available in two options - 4 and 6 GHz. It is combines an antenna analyzer (CAT), vector network analyzer (VNA), Spectrum Analyzer and an interference analyzer all into one hand held device. It can also be use as an independent source, vector voltmeter, power sensor and for channel power measurements.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
Two Port ShockLine™ Vector Network Analyzers from 50 kHz to 4.5/8.5 GHz

Vector Network Analyzer from Anritsu

The MS46522A from Anritsu is a series of 2-port RF ShockLine™ Vector Network Analyzers with a frequency range from 50 kHz to 4.5/8.5 GHz. This series of VNA’s are available in a compact and rugged 2U chassis with a touch screen monitor, keyboard and mouse.
 
Download Datasheet | Product Details
 
Signal Generator
3/6 GHz Compact & Fast Vector Signal Generator

Signal Generator from Rohde & Schwarz

The R&S SGT100A is a fast vector signal generator that generates signals up to 6 GHz (Available in 3 GHz and 6 GHz configurations). The generator has a settling time of less than 500 us and can provide an output from -120 dBm to 15 dBm with harmonics of -30 dBc.
 
Download Datasheet | Product Details
 
PIM Analyzer
Multi Band PIM Analyzers well suited for R&D, Production & QA

PIM Analyzer from AWT Global

The PEM42A series from AWT Global are multi-band PIM Analyzers that can do both Passive Intermodulation and S-parameter measurements with a single DUT connection. They use the Agilent’s E5072A ENA series network analyzer to perform S-parameter measurements together with AWT’s PEM42A multi band PIM analyzers.
 
Download Datasheet | Product Details
 
GPS/GNSS Antenna
Miniature GNSS Receive Passive Horizontal-Mount PCB Antenna

GPS/GNSS Antenna from Parsec Technologies, Inc.

The PTA1.5-16 is a miniature printed circuit board (PCB) laminate based passive antenna that operates from 1560 to 1610 MHz. It easily integrates with GNSS/GPS receivers with a single direct connection. The antenna has a gain of -0.54 dB at 1560 MHz, has a low noise figure of 1 dB. The antenna has a dimension of 9.2 x 16 x 0.8 mm (L x W x thickness).
 
Download Datasheet | Product Details
 
Directional Coupler
6 to 60 GHz Directional Coupler with 20 dB Coupling

Directional Coupler from Pulsar Microwave

The CS20-55-435/4 is a directional coupler from Pulsar Microwave that operates from 6 to 60 GHz. It has a coupling of 20 dB, flatness of 2 dB, insertion loss of 1.8 dB and directivity of 7 dB. The coupler can handle up to 20 watts of power and has a VSWR of 2.5:1. It is available in a module with 1.85 mm connectors.
 
Download Datasheet | Product Details
 
Coaxial Termination
DC to 18 GHz, 10 Watt N Type Coaxial Termination

Coaxial Termination from HASCO Components

The HT18NM-10 is a DC to 18 GHz N Type Coaxial Termination. It can handle up to 10 Watts of RMS power and up to 100 Watts of peak power. The termination is matched to 50 Ohms and has a VSWR of less than 1.4:1 up to 18 GHz. It can operate at a temperature range from -55 to 150 Degrees C.
 
Download Datasheet | Product Details
 
RF Switch
100 MHz to 6 GHz SPDT UltraCMOS Reflective Switch for WLAN Applications

RF Switch from Peregrine Semiconductor

The PE42424 is an UltraCMOS SPDT switch from Peregrine that operates from 100 MHz to 6 GHz. The switch has a high isolation of over 35 dB and a fast switching speed of 125 ns. It can handle up to 29 dBm of pulsed power, 30 dBm CW power and high linearity with an IP3 of 61 dBm.
 
Download Datasheet | Product Details
 
Low Pass Filter
DC to 787 MHz Ceramic Notch Filter for LTE & DVB-T Applications

Low Pass Filter from MCV Microwave

The NPX787M-75A from MCV Microwave is a DC to 787 MHz Ceramic Notch filter that has been developed for LTE and DVB-T applications. The filter has an insertion loss of less than 4 dB with a return loss over 10 dB. It is matched to 75 ohms and can handle up to 1 watt of power. The NPX787M-75A is available in a surface mount package.
 
Download Datasheet | Product Details
 
RF Amplifier
0.04 to 3.5 GHz Dual Matched Surface Mount Amplifier

RF Amplifier from Mini Circuits

The MPGA-105+ is a dual matched MMIC amplifier from Mini Circuits that operates from 0.04 to 3 GHz. This push-pull amplifier has been designed for use in both 50 and 75 ohm systems. It has a high dynamic range, low noise figure and an exceptionally high IP2. The MPGA-105+ is available in a compact surface mount package.
 
Download Datasheet | Product Details
 
RF Amplifier
500 to 4200 MHz, 5 Watts Power Amplifier

RF Amplifier from Mini Circuits

The ZHL-5W-422+ is a high power amplifier from Mini Circuits that operates from 500 MHz to 4200 MHz. The amplifier provides up to 5 watts of power and has an IP3 of 45 dBm and IP2 of 55 dBm. It has an efficiency of 30% and safety features that protect it from damages with an open or short output load under full CW output power.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
Surface Mount 10.64 GHz Frequency Synthesizer

Frequency Synthesizer from Z-COMM

The SFS10640H-LF is a fixed frequency synthesizer from Z-COMM that generates a signal at 10640 MHz. This can be used in microwave radio links, radars and in test instrumentation. The signal has a phase noise of -98 dBc/Hz with a harmonic suppression of -30 dBc and output power from -3 to 3 dBm.
 
Download Datasheet | Product Details
 
New Cable Assembly Builder Tool
Cable Assembly Builder
Get Quotations on Cable Assemblies
Enter your requirement and get quotations from over 20 of the leading Cable Assembly manufacturers. This has been developed to save you time. Try it out – Get a Quote NOW!
 
 
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.