1. everything RF
  2. RF Newsletters
more
PREV 10 June, 2020 NEXT

New RF and Microwave Products this Week

10 June, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 10 June, 2020
 
Sponsored by Signal Hound
 
 
 
New RF and Microwave Products this Week
RF Amplifier
Ka-Band GaN Power Amplifier from 34 to 36 GHz

RF Amplifier  from QuinStar Technology Inc

The QBP-35025055 from Quinstar Technology is a Ka-Band GaN Power Amplifier that operates from 34 and 36 GHz. It provides a saturated output power of 50 dBm with a gain of 55 dB. This solid-state amplifier requires a DC Supply between 28V to 48V and has a current consumption from 14 to 25 A.
Download Datasheet | Product Details
RF Transceiver
GaN Transmitter/Receiver Module from 2.7 to 3.1 GHz

RF Transceiver  from RFHIC

The RFMR29-SFEM-200-400A from RFHIC is a GaN Transmitter/Receiver (T/R) Module that operates from 2.7 to 3.1 GHz. This S-band transceiver provides an output power of 200 W with a Tx gain of 59 dB. The device is designed using GaN on SiC HEMT technology, resulting in a higher breakdown voltage, wider bandwidth, and higher efficiency (37%).
Download Datasheet | Product Details
RF Variable Attenuator
95 dB Ethernet/USB Controlled Attenuator from 50 to 8000 MHz

RF Variable Attenuator  from Adaura Technologies

The AD-USB1AR38G95 from ADAURA Technologies is a Single Channel Ethernet/USB Controlled Attenuator that operates from 50 to 8000 MHz. It has an attenuation range from 0 to 95 dB with a step size of 0.25 dB.The attenuator has an insertion loss of 12.5 dB and provides isolation of 120 dB. It can handle input power up to 28 dBm and has a switching speed of 520 ns.
Download Datasheet | Product Details
Front End Module
Front-End Module for Multi-Band 4G/5G and LTE/NR Applications

Front End Module  from Skyworks Solutions

The SKY5-8255-11 from Skyworks is a Front-End Module that supports multi-band 4G/5G and LTE/NR applications. This FEM incorporates PA blocks, input and output matching, a MIPI standard digital control block, single-ended filters, an antenna port with band select switches, and a low noise amplifier. The integrated LNA with MIPI control features up to seven gain modes and independent gain and bias control.
Download Datasheet | Product Details
RF Amplifier
7 W Solid-State Power Amplifier from 1 to 2.5 GHz

RF Amplifier  from NuWaves Engineering

The NW-PA-LS-5-MI01 from NuWaves is a Micro L & S-Band Solid-State Power Amplifier that operates from 1 to 2.5 GHz. It provides a saturated output power of 7 watts and a gain of over 41 dB with an efficiency of 35 %. This amplifier requires a supply voltage of 26 to 30 VDC and consumes less than 1.25 A of current.
Download Datasheet | Product Details
Cellular IoT Module
Low Power CAT-M and NB-IOT Module for M2M Applications

Cellular IoT Module  from SIMCom

The SIM7070 Series from SIMCom is a LPWA module for Cat-M, Cat-NB, GPRS and EDGE. It can be used to provide low power, low latency and low throughput data communications for a wide range of applications. The module requires a supply voltage from 3.2 to 4.6 V and with Power Saving Mode (PSM) and Extended Discontinuous Reception (eDRX), it can operate on a single battery for up to 10 years.
Download Datasheet | Product Details
RF Module
High-Performance Wireless Module from 868 to 870 MHz

RF Module  from Anaren Inc

The A1101R08A from Anaren Integrated Radio (AIR) is a high-performance ETSI-Compliant RF Module that operates from 868 and 870 MHz. The module provides a programmable output power of up to 10 dBm and has an Rx sensitivity of -112 dBm. It supports an SPI Interface for serial communication and has a maximum data rate of up to 600 kbps along with a baud rate of 1.2 kBaud
Download Datasheet | Product Details
Sponsored by Signal Hound
Signal Hound
A 6 GHz Vector Signal Generator with 40 MHz of real-time streaming bandwidth
The VSG60A is an affordable & agile streaming vector signal generator capable of frequencies up to 6 GHz. Featuring a low-phase noise local oscillator with 200 µs switch time, the VSG60A is ideal for frequency-hopping spread spectrum testing. Capable of continuously streaming waveforms of virtually any size from your PC or laptop – the VSG60A offers an unrivaled value at $2445 USD. Click here to learn more.
 
RF & Microwave Circulator
Coaxial Circulators from 10 MHz to 20 GHz

RF & Microwave Circulator  from UIY Inc.

The coaxial circulators from UIY operate from 10 MHz to 20 GHz. They have an insertion loss of below 1.2 dB, isolation of over 14 dB, and can handle up to 600 watts of forward power. These circulators are available in a module with N-type and SMA connectors as standard products and can also be ordered as a custom module.
Download Datasheet | Product Details
RF Transistor
80 W GaN-on-SiC HEMT from 7.9 to 8.4 GHz

RF Transistor  from Wolfspeed, A Cree Company

The CGHV96050F1 from Wolfspeed is a GaN-on-SiC HEMT that operates from 7.9 to 8.4 GHz. It provides an output power of 80 watts with a gain of over 13 dB and a PAE of 33%. The device has a pulse width of 100 µs and a duty cycle of 10%. This HEMT is ideal for satellite communication and terrestrial broadband applications.
Download Datasheet | Product Details
RF Transistor
14 W GaN Power Transistor from 30 MHz to 2.7 GHz

RF Transistor  from Tagore Technology

The TA9210D from Tagore Technology is a GaN Power Transistor that operates from 30 MHz to 2.7 GHz. At 800 MHz, it delivers a saturated output power of 41.5 dBm (14.1 W) with a large signal gain of 13.5 dB, and a PAE of 54%. The device requires a supply voltage of 32 V and consumes 50 mA of current. This power transistor is available in a 32-lead QFN package that measures 3 x 6 x 0.8 mm.
Download Datasheet | Product Details
RF Amplifier
250 W Solid State Power Amplifier from 1 to 3 GHz

RF Amplifier  from Empower RF

The 2194 from Empower RF Systems is a Solid State High Power Amplifier that operates from 1 to 3 GHz. The amplifier provides a saturated output power of 250 Watts with a power gain of 54 dB. It is ideal for octave bandwidth high power CW, modulated, and pulse applications. It is available in two variants – One with a 24 V DC supply and the other with a 240 V Single Phase AC supply.
Download Datasheet | Product Details
Fixed Attenuator
N-Type Fixed Attenuators from DC to 18 GHz

Fixed Attenuator  from Weinschel Associates

The WA96 from Weinschel is are fixed unidirectional attenuators that operates from DC to 18 GHz. They are available in attenuation configurations of 10, 20, 30, or 40 dB. These attenuators can handle up to 250 W of average input power, 1 kW of peak power (5 microseconds pulse width, 3.5% duty cycle), and have a VSWR of 1.6:1.
Download Datasheet | Product Details
RF Module
Wi-Fi Bluetooth Combo Module for Industrial Applications

RF Module  from SparkLAN

The WNFB-266AXI (BT) from SparkLAN is a Wi-Fi 6 (WLAN 802.11.ax/ac/a/b/g/n) and Bluetooth (V5/4.1/4.0/3.0/2.1) Combo module. The 802.11ax SDIO M.2 2230(KEY E) module can support Multi-User MIMO (MU-MIMO) technology to increase channel capacity when simultaneously servicing multiple devices using the same frequency chunks and can accomplish up to the speed of 867 Mbps with dual-stream.
Download Datasheet | Product Details
RF Module
Ultra-Small Bluetooth Low Energy Module for IoT Applications

RF Module  from Insight SiP

The ISP1302 Series from Insight SiP is a Single Mode Bluetooth V4.2 module that can be used for Home Automation, Beacons, Wearable devices, Healthcare, and Industrial Applications. This ultra-small LGA module, 8 x 8 x 1 mm, is based on the Nordic nRF51822 Chip. Its powerful Cortex™ M0 CPU, flash, and RAM memory combined with an optimized antenna offer the perfect solution for Bluetooth connectivity.
Download Datasheet | Product Details
Sponsored by Signal Hound
 
 
 
Block Up Converter
Ka-band GaN Block-Up Converter from 27.5 to 31 GHz

Block Up Converter  from ACORDE

The ACTX-Ka8W-Ex-V6 from Acorde is a Low-power GaN Block-Up Converter (BUC) that up-converts an Input frequency from 950 to 2000 MHz to an output frequency from 27.5 to 31 GHz. This BUC has been designed for Ka-band professional & military satellite communication systems (ground, SOTP, SOTM, maritime, etc.).
Download Datasheet | Product Details
Frequency Multiplier
Passive MMIC Frequency Doubler with 20 to 50 GHz Output

Frequency Multiplier  from Marki Microwave

The MMD-2050HSM from Marki Microwave is a Passive MMIC mm-Wave Frequency Doubler that up-converts an input frequency from 10 to 25 GHz to an output frequency from 20 to 50 GHz. Fabricated with GaAs Schottky diodes, this doubler provides a conversion loss of 12.5 dB when driven by an LO drive of 10 to 15 dBm. The device has F and 3F suppressions of 33 dBc and 40 dBc, respectively.
Download Datasheet | Product Details
RF Mixer
GaAs MMIC Mixer from 2.5 to 6 GHz

RF Mixer  from BeRex, Inc.

The BM351 from Berex is a GaAs MMIC Mixer with an RF/LO frequency from 2.5 to 6 GHz and IF frequency from 50 to 200 MHz. It has a conversion loss of 9 dB and provides RF-IF isolation of up to 37.9 dB with an IP3 of 32 dBm. The mixer has a passive GaAs FET converter and a two-stage integrated LO driver.
Download Datasheet | Product Details
Noise Generator
40 GHz Programmable AWGN Noise Generators for Automated Testing

Noise Generator  from Noisecom

The RFX7000B Series from Noisecom are Programmable AWGN Noise Generators that operate up to 40 GHz. These devices have a powerful on-board computer with a flexible architecture that is used to create complex custom noise signals for advanced test systems. They can provide high output power with superior flatness, and allow the control of multiple attenuators and switches.
Download Datasheet | Product Details
Power Divider
350 W 2-Way Power Divider from 700 to 1000 MHz

Power Divider  from Electro-Photonics LLC

The Y2D-900R from Electro-Photonics is a 2-way Power Divider/Combiner that operates from 700 to 1000 MHz. It can handle 350 W of power, has an insertion loss of 0.15 dB, and provides isolation of 20 dB. The divider has a phase balance of 2 degrees with a VSWR of 1.35:1. It is available in a surface-mount package.
Download Datasheet | Product Details
Power Divider
4-Way Resistive Power Divider from 6 to 40 GHz

Power Divider  from MECA

The 804-3-23.000 from MECA is a 4-way resistive power divider that operates from 6 to 40 GHz. The divider can handle up to 30 Watts of power, has an insertion loss less than 2.6 dB, an isolation of over 14 dB and a VSWR under 1.80:1. It is available in a module with 2.92 mm female connectors.
Download Datasheet | Product Details
RF Shielded Test Enclosure
RF Shielded Test Enclosure from 20 MHz to 6 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-20U60-A1 from RF Electronics is an RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. It has a thick RF absorbing foam that provides an isolation of over 95 dB. The device has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
Download Datasheet | Product Details
Antenna
136-174 / 380-520 / 698-960 MHz Multi-Band Antenna

Antenna  from PCTEL

The PCTWSLMR-2 from PCTEL is a Multi-Band Antenna that supports multi-band radio technology to provide interoperability among emergency management and response personnel, regardless of the frequency band used. This wide spectrum antenna provides coverage of VHF and UHF bands (136-174 MHz / 380-520 MHz / 698-960 MHz).
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]