1. everything RF
  2. RF Newsletters
more
PREV 1 July, 2020 NEXT

New RF and Microwave Products this Week

1 July, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 1 July, 2020
 
Sponsored by EMC Directory
 
 
 
New RF & Microwave Products this Week
Vector Network Analyzer
2-Port and 4-Port Vector Network Analyzers up to 67 GHz

Vector Network Analyzer  from Keysight Technologies

The N5227B Series from Keysight Technologies are 2-Port and 4-Port Vector Network Analyzers that operates from 900 Hz to 67 GHz. These VNAs can measure S-parameters with the smallest uncertainty and high stability, and efficiently characterize active components with applications that simplify setups. This VNA has a dynamic range of 128 dB and harmonics of -60 dBc.
Download Datasheet | Product Details
RF & Microwave Circulator
Surface Mount RF Circulator from 3300 to 3800 MHz

RF & Microwave Circulator  from TDK

The CU4S0508 Series from TDK Corporation are SMD Circulators that operate from 3300 to 3800 MHz. They have an insertion loss of less than 1.3 dB, isolation of over 10 dB, and can handle up to 5 watts of power. These circulators have a clockwise direction of circulation and have a VSWR of 2:1. The CU4S0508 Series can be used for commercial-grade applications.
Download Datasheet | Product Details
Frequency Synthesizer
Low Phase Noise Frequency Synthesizer from 0.2 to 20 GHz

Frequency Synthesizer  from ERAVANT

The SOT-02220313200-SF-B6 from ERAVANT is a Frequency Synthesizer Module that operates from 0.2 to 20 GHz. It has frequency stability of ±0.2 ppm and a low phase noise of less than -115 dBc/Hz. The model is externally referenced with an internal reference backup and has a frequency resolution of up to 0.1 Hz.
Download Datasheet | Product Details
Front End Module
10 W Front-End Module from 2700 to 3000 MHz

Front End Module  from RFHIC

The HR2730-10A from RFHIC is a Front-End Module that operates from 2700 to 3000 MHz. It has been designed for next-generation digital beamforming phased array radar applications. The hybrid device consists of a GaN on SiC transmitter and a duplexer switch at the antenna port that switches between LNA mode and Bypass mode. The Rx chain has a built-in limiter diode that protects the receiver.
Download Datasheet | Product Details
RF Amplifier
5 W X-Band GaN Power Amplifier from 8 to 12.75 GHz

RF Amplifier  from United Monolithic Semiconductors

The CHA6710-FAB from United Monolithic Semiconductors is an X-Band Two-Stage Power Amplifier that operates from 8 to 12.75 GHz. It provides 5 W of saturated output power with a gain of 22.5 dB and has a Power Added Efficiency of 35%. The amplifier can handle up to 30 dBm of peak input power. It is suitable for applications such as defense and space communication systems.
Download Datasheet | Product Details
Digital Phase Shifter
Single-Bit GaAs MMIC Phase Shifters from 8 to 15 GHz

Digital Phase Shifter  from VIPER RF

The VRFC0010-BD Series from Viper RF are Single Bit GaAs MMIC Phase Shifters that operates from 8 to 15 GHz. They provide a phase shift of 45, 90, and 180-degrees. These devices have an insertion loss of less than 2.4 dB and with their RF ports matched to 50 ohms. They require a control voltage of +0.5/-7 V and consume up to 100 µA of current.
Download Datasheet | Product Details
Featured Interview
Interview
Interview with Tim Lee about IMS 2020
IMS2020, the IEEE MTT-S annual RF/Microwave event, which was originally scheduled to take place in Los Angeles, CA from 21-26 June 2020, was transformed into a virtual event and rescheduled to take place from 4-6 August 2020 due to the global COVID-19 pandemic. To tell users more about this new event format, everything RF Interviewed Tim Lee, the IMS2020, General Chair. Click here to read more.
 
Horn Antenna
Horn Antenna from 1 to 4 GHz for Automotive Radar Pulse Testing

Horn Antenna  from MILMEGA

The WBHA 0104-1 from Milmega is a Horn Antenna that operates from 1 to 4 GHz. It features optimizing lens for automotive radar pulse testing at a 1-meter test distance as required by GMW 3097 and EMC-CS-2009. This antenna delivers a gain of over 13 dBi and can handle a peak power of 6000 watts. The device has a VSWR (no lens) of less than 1.6:1 and a 3dB beamwidth of up to 39 degrees.
Download Datasheet | Product Details
RF Amplifier
Preamplifier from 5 kHz to 300 MHz for EMC Applications

RF Amplifier  from AH Systems Inc

The PAM-5K300 from A.H. Systems is a Preamplifier that operates from 5 kHz to 300 MHz. It provides a gain of 32 dB (1 dB gain flatness) with a noise figure of 2.1 dB. This device consumes 140 mA of current at 12 VDC input supply and has a VSWR of less than 1.5:1. The PAM-5K300 is an excellent choice for improving the system dynamic range. It is suitable for EMC Test Houses for Compliance Testing and Field RFI Testing.
Download Datasheet | Product Details
RF Amplifier
60 W Solid-State Amplifier from 0.7 to 6 GHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 60S1G6 from AR RF/Microwave Instrumentation is a portable, self-contained, air-cooled, solid-state microwave amplifier that operates from 0.7 to 6 GHz. It delivers over 60 watts of CW output power and has a gain of more than 48 dB with a noise figure of 10 dB. The low level of spurious signals and linearity make it ideal for use as a driver amplifier in testing wireless and communication components and subsystems.
Download Datasheet | Product Details
RF Module
Multi-Protocol Bluetooth Low Energy / NFC Combo Module

RF Module  from Laird Connectivity

The BL654PA from Laird Connectivity is a wireless module that supports Bluetooth Low Energy (BLE 5.1) and NFC. This module is powered by the Nordic nRF52840 Silicon SoC that provides a secure and robust BLE connection and Cortex-M4F CPU for any OEM product design. It has an integrated power amplifier from Skyworks that provides an output power of up to 18 dBm.
Download Datasheet | Product Details
RF Switch
High Isolation DPDT Switch from 0.4 to 5.9 GHz for 5G Automotive Applications

RF Switch  from Skyworks Solutions

The SKY5A1007 from Skyworks is a CMOS based SOI DPDT switch that operates from 0.4 to 5.9 GHz. It provides a low insertion loss of 0.7 dB and isolation of more than 30 dB. The device enables high speed switching between multiple antennas for high data throughput and minimizing the need for additional filtering. It is ideal for Automotive 4G LTE/5G/CV2X/11p telematics systems and Main/Diversity antenna swapping applications.
Download Datasheet | Product Details
RF & Microwave Circulator
X-band Surface Mount Circulator from 8.7 to 8.9 GHz

RF & Microwave Circulator  from Renaissance Electronics Corporation

The 3SMH8NAM from Renaissance Electronics Corporation is an X-band Surface Mount Circulator that operates from 8.7 to 8.9 GHz. It has a low insertion loss of 0.6 dB, high isolation of 17 dB, and can handle up to 1 watt of power. The device has a VSWR of 1.33:1 and operates over a temperature range from -40°C to 90°C.
Download Datasheet | Product Details
Sponsored by EMC Directory
 
 
 
RF Variable Attenuator
200 to 6000 MHz Modular Attenuator Assembly Expandable up to 192 Attenuators

RF Variable Attenuator  from JFW Industries

The 50PA-1068 from JFW Industries is a programmable attenuator controller module that can be configured to have up to 192 Attenuators. The controller module can be connected to a maximum of 8 attenuator modules. Each attenuator module has 24 attenuators with SMA connectors or 12 attenuators with N-Type connectors.
Download Datasheet | Product Details
Power Divider
4-Way Power Divider from 2 to 26 GHz

Power Divider  from Planar Monolithics Industries

The APD-4-2G26G-292FF-1W from Planar Monolithics is a 4-Way Power Divider that operates from 2 to 26 GHz. It can handle up to 1 W of CW input power, has an insertion loss of less than 2.25 dB and provides isolation of 15 dB. The power divider has an amplitude balance of ±0.5 dB, a phase balance of ±6 degrees, and a VSWR of less than 1.7:1.
Download Datasheet | Product Details
RF Cable
40 GHz Test Cables for Lightweight DUTs and Fixture Board Testing

RF Cable  from MegaPhase

The ChipSet Measurement Test Cables from MegaPhase are Test Cables that operate from 0.3 GHz to 40 GHz. These cables provide a smaller diameter solution for test environments including high-density fixture boards and other board-launched connections. The cables have a shielding effectiveness of -90 dB and a VSWR of less than 1.45:1.
Download Datasheet | Product Details
RF Shielded Test Enclosure
RF Shielded Test Enclosure for 5G Device Testing up to 6 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-6U60-B2 from RF Electronics is an RF Shielded Test Enclosure that has been designed and developed for WLAN, wireless device testing up to 6 GHz. It has a thick RF absorbing foam which deadens standing waves and reflections and offers higher level isolation for accurate performance. The device is equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
Download Datasheet | Product Details
Frequency Synthesizer
9.25 GHz Fixed Frequency Phase-Locked Loop for Radar Applications

Frequency Synthesizer  from Z-COMM

The SFS9250C-LF from Z-COMM is a Fixed Frequency Phase-Locked Loop that has been designed to produce a fixed signal at 9250 MHz while locked to an external 10 MHz reference oscillator. This X-band PLO features exceptionally low phase noise of -75 dBc/Hz, -92 dBc/Hz, and -118 dBc/Hz at the 1 kHz, 10 kHz and 100 kHz offsets, respectively.
Download Datasheet | Product Details
RF Transistor
56 W Doherty RF GaN Transistor from 2496 to 2690 MHz

RF Transistor  from NXP Semiconductors

The A3G26H501W17S from NXP Semiconductors is a Doherty RF Power GaN Transistor that operates from 2496 to 2690 MHz. This asymmetrical transistor provides a P1dB of 56 watts with a power gain of over 12.7 dB and a drain efficiency of 40.7%. It has a pulse width of 10 µs, a duty cycle of 10%, and requires a supply voltage of 48 V.
Download Datasheet | Product Details
RF Amplifier
Low Noise Amplifier MMIC from 2.5 to 3.5 GHz

RF Amplifier  from MACOM

The MAAL-011138 from MACOM is a Low Noise Amplifier MMIC that operates from 2.5 to 3.5 GHz. This single-stage device provides an OIP3 of 28 dBm with a gain of 21 dB and a noise figure of 1 dB. It requires a supply voltage of 5 V and consumes up to 65 mA of current. This RoHS-compliant amplifier is available in a lead-free 2 mm 8-LD PDFN plastic package and is ideally suited for S-band transmit-receive modules.
Download Datasheet | Product Details
RFID Tag
RFID Inlay for Case, Pallet, and Asset Tracking Applications

RFID Tag  from Zebra

The ZBR2000 from Zebra is an RFID Inlay that operates from 865 to 868 MHz (ETSI) and 902 to 928 MHz (FCC). It has a read range of up to 17 meters in free space. This inlay has a read sensitivity of up to -23 dBm and a write sensitivity of up to -18 dBm. The inlay is based on NXP’s UCODE 8 chip and has an EPC memory of 128 bits and a TID memory of 96 bits (48 bit unique).
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]