PREV 22 July, 2020 NEXT

New RF and Microwave Products this Week

22 July, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 22 July, 2020
 
Sponsored by Coilcraft
 
 
 
New RF and Microwave Products this Week
Power Divider
2 Way GaAs Power Splitter/Combiner from 12 to 43.5 GHz

Power Divider  from Mini Circuits

The EP2-5G1+ from Mini-Circuits is a 2-Way Power Splitter/Combiner that operates from 12 to 43.5 GHz. It can handle up to 0.5 W of input power, has an insertion loss of 1.3 dB and provides isolation of up to 23 dB. The device has an amplitude unbalance of 0.1 dB, a phase unbalance of less than 3 degrees, and a VSWR of 1.5:1.
Download Datasheet | Product Details
Directional Coupler
15 dB Directional Coupler from 2 to 18 GHz

Directional Coupler  from Werbel Microwave

The C-1182-15 from Werbel Microwave is a Directional Coupler that operates from 2 to 18 GHz. It has a coupling factor of 15 dB (± 1.0 dB deviation), an insertion loss of 0.8 dB, and directivity of 17 dB. The device can handle up to 50 W of CW and 3 kW of peak input power. It has a VSWR of 1.35:1 and excellent return loss.
Download Datasheet | Product Details
Low Pass Filter
Miniature Harmonic Filter with a Passband from 2500 to 6000 MHz

Low Pass Filter  from NuWaves Engineering

The NW-FL-05LPLE-6000-SFSF-M01 from NuWaves is a miniature harmonic filter with passband from 2500 to 6000 MHz. It can handle up to 50 W of input power and has a passband insertion loss of less than 0.75 dB. The filter provides an over 20 dB of rejection from 8 to 10 GHz and has a VSWR of 1.5:1. It is designed to reduce harmonics at the output of transmitters operating in the C-Band.
Download Datasheet | Product Details
RF Amplifier
InGaP HBT Power Amplifier from 660 to 720 MHz

RF Amplifier  from Guerrilla RF

The GRF5506 from Guerrilla RF is a Power Amplifier that operates from 660 to 720 MHz. It provides an output P1dB of 32 dBm with a gain of 28 dB and a noise figure of 4.5 dB. The device can handle up to 10 dBm of average input power and has an OIP3 of 46.5 dBm. It uses an InGaP HBT process and has a digital shutdown feature.
Download Datasheet | Product Details
Phase Noise Analyzer
10 MHz to 26 GHz Real-Time Phase Noise Analyzer

Phase Noise Analyzer  from Holzworth Instrumentation

The HA7062D from Holzworth is a real-time phase noise analysis system that operates from 10 MHz to 26 GHz (optional to 40 GHz). It provides measurement offsets from 0.1 Hz to 100 MHz. This Real Time Phase Noise Analyzer is designed to provide high speed data acquisition, while maintaining accuracy and repeatability.
Download Datasheet | Product Details
Cellular Module
Sub-6 GHz 5G Module for SA and NSA Networks

Cellular Module  from Fibocom

The FG650 from Fibocom is a high-performance 5G module based on Unisoc’s V510 Chipset. It supports both 5G Standalone (SA) and Non-Standalone (NSA) network architectures, 5G Sub-6 GHz, and global mainstream frequency, bands. The module is compatible with 5G/LTE/WCDMA multi-network standards and is designed in the LGA form factor.
Download Datasheet | Product Details
RF Module
2x2 MIMO Wi-Fi / Bluetooth Combo USB-Module for 2.4 and 5 GHz

RF Module  from LM Technologies

The LM843 Series from LM Technologies are 2.4/5 GHz WiFi and Bluetooth 5.0 Combo Modules. These dual combination SMT modules off­ers a wide range of solutions and can support 2-streams (802.11 a/b/g/n/ac) with Multi-user MIMO connections while operating under enhanced power management. They can provide theoretical data rates of up to 866.7 Mbps (Wi-Fi) and 2 Mbps (Bluetooth).
Download Datasheet | Product Details
Sponsored by Coilcraft
Coilcraft
Wirewound Ferrite Beads Offer a High Magnitude of Attenuation across a Wide Frequency Range
Coilcraft wirewound ferrite beads provide superior attenuation and frequency performance, allowing smaller solution sizes compared to traditional thick-film chip ferrite beads. Click here to learn more!
 
GNSS OEM Board
GNSS OEM Board that Supports RTK and Automotive Deak Reckoning

GNSS OEM Board  from SparkFun Electronics

The ZED-F9R GPS Breakout from SparkFun Electronics is a GNSS OEM Board that has been designed for concurrent reception of GPS, GLONASS, Galileo and BeiDou signals with ~0.2-meter accuracy. This high-precision, sensor fusion GPS board takes advantage of u-blox's Automotive Dead Reckoning (ADR) technology.
Download Datasheet | Product Details
RF Transistor
235 W GaN-on-SiC HEMT from 3.4 to 4.1 GHz

RF Transistor  from Wolfspeed, A Cree Company

The GTRA412852FC-V1 from Wolfspeed is a GaN-on-SiC High Electron Mobility Transistor (HEMT) that operates from 3.4 to 4.1 GHz. It delivers an output power of 235 watts (P3dB) with a gain of 11.5 dB and an efficiency of 45%. This pulsed device requires a supply voltage of 48 V and has a pulse width of 10 µs. It is RoHS-complaint and Pb-free.
Download Datasheet | Product Details
Microwave Generator
1000 W Solid State Microwave Generator from 2400 to 2500 MHz

Microwave Generator  from SAIREM

The GMS1000 from SAIREM is a Solid State Microwave Generator that operates from 2400 to 2500 MHz. It provides continuous wave (CW) output power adjustable from 0 to 1000 W at 2450 MHz. The generator can provide over 900 W of power across the complete frequency from 2400 and 2500 MHz. It provides protection against reflected power and measurement of reflected power via a built-in isolator.
Download Datasheet | Product Details
Diplexer
1800 / 2100 MHz Diplexer for Wireless Infrastructure

Diplexer  from Kaelus

The DBC0021F3V22-2 from Kaelus is a Multi-Band Combiner that provides diplexing of the 1800 MHz band (1710 to 1880 MHz) and 2100 MHz band (1920 to 2170 MHz) wherever both signals are required on a single output. It has an insertion loss of less than 0.35 dB and attenuation of over 50 dB. This device can handle an average power of 250 watts and a peak envelop power (PEP) of 1 kW.
Download Datasheet | Product Details
RF Tapper
Low PIM Power Tappers from 380 to 6000 MHz

RF Tapper  from Westell Technologies

The CS65-550-856 Series from Westell are Power Tappers that operate from 380 to 6000 MHz. These tappers provide 2G, 3G, 4G, LTE, and 5G coverage, and can handle 500 watts of power. With tap values from 3 to 30 dB, they allow even distribution of RF power throughout a distributed antenna system (DAS). These tappers have an insertion loss of less than 1.8 dB, a VSWR of under 1.50:1, and a low PIM of less than -161 dBc.
Download Datasheet | Product Details
Base Station Antenna
10-Port Base Station Panel Antenna from 698-960 and 1710-2690 MHz

Base Station Antenna  from Amphenol Antenna Solutions

The 1800408NGv from Amphenol Antenna Solutions is a 10-Port Base Station Panel Antenna that operates in two bands (1 x 698-960 MHz and 4 x 1710-2690 MHz). This dual-polarized antenna delivers a gain of over 16.5 dB and has a horizontal beamwidth of 65-degrees. It features a RET (Remote Electronic Tilt) module inside the antenna for providing electrical tilt ranging from 2 to 12º.
Download Datasheet | Product Details
RF Amplifier
5 W Power Amplifier from 2.5 to 3.8 GHz

RF Amplifier  from RFcore

The RCA2538H37B0 from RFcore is a Power Amplifier that operates from 2.5 to 3.8 GHz. It provides more than 5 W of CW saturated output power with a small signal gain of 40 dB (5 dB gain flatness). The amplifier has an On/Off switching time of 10µs. The device can handle up to 10 dBm of short-term and 5 dBm of long-term input power.
Download Datasheet | Product Details
Sponsored by Coilcraft
 
 
 
Antenna
2.4/5.0 GHz Antenna for WiFi, Sigfox, Bluetooth and ISM Applications

Antenna  from 2J Antennas

The 2J0A02-C367G from 2J Antennas is a Dual Band WiFi / ISM band Antenna that operates from 2410 to 2490 and 4920 to 5925 MHz. It supports WiFi, Sigfox, LoRa, LPWA, BT, ZigBee, RFID, and ISM standards. This linearly polarised antenna delivers a peak gain of over 1 dBi with an efficiency of up to 53.9% and can handle 25 W of input power.
Download Datasheet | Product Details
TCXO
Clipped Sine Wave TCXO from 26 to 52 MHz

TCXO  from Geyer

The KXO-88 from Geyer Electronic is a TCXO that operates from 26 to 52 MHz. It provides a clipped sine wave output, has frequency stability of ±0.5 ppm over a temperature range from -30°C to +85°C and a frequency tolerance of up to ±1.5 ppm. The TCXO has a phase noise of -155 dBc/Hz at 100 kHz offset and a maximum start-up time of 2ms.
Download Datasheet | Product Details
VCXO
100 MHz VCXO with LVCMOS Output

VCXO  from Abracon LLC

The ABLJO-V-100.000MHZ from Abracon is a VCXO that operates at 100 MHz. It has a frequency stability of ±45 ppm and operates over a temperature range of -40°C to 85°C. The VCXO requires a 3.3 V supply and provides standard LVCMOS at the output. This RoHS/RoHS II compliant VCXO is available in a 6-pin surface-mount package that measures 14.3 X 8.7 X 5.5 mm.
Download Datasheet | Product Details
DLVA
SDLVA from 100 MHz to 4 GHz for High-Speed Applications

DLVA  from Planar Monolithics Industries

The SDLVA-100M4G-CD-1 from Planar Monolithics Industries is a Successive Detection Logarithmic Video Amplifier (SDLVA) that operates from 100 MHz to 4 GHz. The amplifier has a dynamic range of 71 dB, a log slope of 25 mV/dB, and a log range from -70 to 0 dBm. It has a rise time of 30 ns, a recovery time of 200 ns, and a VSWR of 2:1.
Download Datasheet | Product Details
90 Degree Hybrid Coupler
90-degree Hybrid Coupler from 1 to 4 GHz

90 Degree Hybrid Coupler  from VidaRF

The VHC1040A from VidaRF is a 90-degree Hybrid Coupler that operates from 1 to 4 GHz. The device has an insertion loss of 0.6 dB and an isolation of 22 dB. It has an amplitude balance of ±0.50 dB and a phase balance of ±5 degrees. This coupler can handle an input power of 50 watts and has a VSWR of 1.25:1. It is available in a module with connectors.
Download Datasheet | Product Details
SATCOM Amplifier System
20 W Ku-Band BUC/SSPA from 14 to 14.5 GHz

SATCOM Amplifier System  from Norsat

The ATOMBKU016 from Norsat is a Ku-Band BUC/SSPA which upconverts an input frequency from 950-1450 MHz to 14-14.5 GHz. It provides a saturated output power of more than 20 W (43 dBm) with a linear gain of 60 dB and has an SSB phase noise of -102 dBc/Hz at 1 MHz. The device has a VSWR of less than 2:1 and a noise power density of -65 dBm/Hz at Tx and Rx.
Download Datasheet | Product Details
RF Over Fiber Module
L-Band RF over Fiber Tx/Rx Modules from 850 to 2450 MHz

RF Over Fiber Module  from DEV Systemtechnik GmbH

The DEV 7233 & DEV 7333 from Dev is a complete L-Band RF over Fiber Link that operates from 850 to 2450 MHz. It consists of two modules that can be connected by a fiber link. Via RF Sensing, the transmit and the receive modules provide continuous RF signal status monitoring on both ends of the transmission chain.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]