PREV 10 September, 2014 NEXT

New RF & Microwave Products this Week

10 Sept. 2014 - everything RF Newsletter
 
everything RF
Date: 10 Sept. 2014
 
Sponsored by Aeroflex / Inmet
 
 
 
New RF & Microwave Products this Week
Omni-Directional Antenna
Iridium Voice/Data and GNSS Antenna for Fleet & Asset Tracking Applications

Omni-Directional Antenna from Maxtena

The 100-00045-01 from Maxtena consists of two separate high performance antennas in one compact and secure housing: one helix Iridium enabling Voice and Data and one high gain active GPS antenna. It is designed for reliable Iridium network SBD application and provides superior call/voice quality.
 
Download Datasheet | Product Details
 
Transceiver
RF Remote Control & Sensor Transceiver Modules

Transceiver from Linx Technologies

The HumRC from Linx Technologies is a wideband transceiver with a microcontroller that is available in a 900 MHz version and 2.4 GHz versions. It includes a Frequency Hopping Spread spectrum (FHSS) protocol. The 900 MHz versions have an output power of up to 10 dBm, resulting in a line-of-sight range of up to 1,600 m (1.0 miles) and the 2.4 GHz versions have output power up to 1 dBm, with a 100 m (300 feet) line of sight range.
 
Download Datasheet | Product Details
 
Ceramic Filter
707 MHz LTE Band 12 (Uplink) Ceramic Filter

Ceramic Filter from Networks International Corporation

The 707 MHz LTE Band 12 (Uplink) Ceramic Filter from NIC has been developed for cellular and base station applications in the LTE band. It has an insertion loss of 2.5 dB with a minimum rejection of 30 dB. The filter is available in surface mount package which measures 1.06 x 0.49 x 0.28 mm.
 
Download Datasheet | Product Details
 
Rack Mount Amplifiers
High Power, Rack Mount RF Power Amplifier System from 960 to 1215 MHz

Rack Mount Amplifiers from Aethercomm

The SSPA 0.960-1.215-2000-RM from Aethercomm is a rack mounted high power amplifier that operates from 960 to 1215 MHz. The high power system has a built in pre-distortion linearizer that allows for low level IMD’s at high RF output levels. The amplifier has an output power of 800-1000 Watts PEP or 200 Watts CW.
 
Download Datasheet | Product Details
 
RF Amplifier
DC to 3 GHz MMIC Amplifier Matched to 50 & 75 Ohms

RF Amplifier from Mini Circuits

The MPGA-105+ is a dual matched MMIC push-pull amplifier from Mini Circuits that operates from 0.04 to 3 GHz. This amplifier has been designed for use in both 50 ohm and 75 ohm systems. It has a gain of 13 to 15.9 dB, low noise figure of 1.7 to 1.9 dB and an exceptionally high IP2.
 
Download Datasheet | Product Details
 
Power Amplifier
28 to 32 GHz GaN Power Amplifier for Ka-Band Applications

Power Amplifier from Custom MMIC

The CMD217 from Custom MMIC is an 8.5 W GaN power amplifier that operates from 28 to 32 GHz. The power amplifier provides a gain of 20 dB, a saturated output power of 39.3 dBm with 35% efficiency. The CMD217 is matched to 50 Ohms eliminating the need for external DC blocks and RF port matching. It requires a 28 V to supply and draws 580 mA of current.
 
Download Datasheet | Product Details
 
Sponsored by Aeroflex / Inmet
Aeroflex Inmet
Meet the New Magic Number for 2 Watt Temperature Variable Attenuators
Push the limits of frequency without sacrificing performance. Aeroflex/Inmet’s new DC to 12 GHz Powerfilm surface mount attenuators vary with temperature and are the perfect balance of price, power, and dependability.To learn more, download the data sheet.
 
 
 
GaN Amplifier
2570 to 2690 MHz GaN Power Amplifier Module for Wireless Infrastructure

GaN Amplifier from RFHIC

The RTP26010-N1 from RFHIC is a GaN power amplifier pallet which operates from 2570 to 2690 MHz. It provides up to 40 dBm of average power, 47.5 dBm of saturated power and has a gain of 40 dB with 1 dB of flatness. The amplifier is ideal for remote radio head, outdoor small cell, antenna system and general purpose applications.
 
Download Datasheet | Product Details
 
Voltage Controlled Oscillator
4100 to 4300 MHz Low Phase Noise VCO for L Band Applications

Voltage Controlled Oscillator from Z-COMM

The V844ME36-LF from Z-COMM is a compact low phase noise VCO for L Band applications that operates from 4100 to 4300 MHz. It has a narrow tuning voltage range from 0.5 to 4.5 V and a low phase noise of -86 dBc/Hz @ 10 kHz offset. This VCO can be used in satellite up/down converters, microwave links and broadcast equipment.
 
Download Datasheet | Product Details
 
RF Switch
0.5 to 6 GHz SPDT Reflective Switch for Commercial & Military Applications

RF Switch from Triquint

The TriQuint TGS2354 is a SPDT reflective switch that operates from 0.5 to 6 GHz. This solid state switch has a low insertion loss of 0.8 dB, high isolation of over 25 dB, switching speed of less than 50 ns and can handle up to 40 watts of power. It is available in a small 1.397 x 1.58 mm die that is lead free and RoHS compliant.
 
Download Datasheet | Product Details
 
Coaxial Termination
50 Watts 7/16 DIN Female Termination from DC to 4 GHz

Coaxial Termination from MECA

The 480-12 from MECA is a 7/16 DIN Female Coaxial termination. It operates from DC to 4 GHz and can handle up to 50 Watts of avg. power and 5000 W of peak power. It has a VSWR of 1.1:1 up to 2 GHz and 1.2:1 from 2 to 4 GHz. The termination has a length of 5.93 inches, a diameter of 1.63 inches and has brass nickel plated connectors.
 
Download Datasheet | Product Details
 
Fixed Attenuator
DC to 12.4 GHz Chip Attenuators Handle up to 1.5 Watt Power

Fixed Attenuator from Aeroflex - Inmet

The PCAW Series of attenuators from Aeroflex/Inmet are chip attenuators that operate from DC to 12.4 GHz. They are available in a number of attenuation options from 0 to 20 dB. Each attenuator can handle up to 1.5 W of power.
 
Download Datasheet | Product Details
 
Power Divider
698 to 2700 MHz Two Way Power Divider with QMA Connectors

Power Divider from VidaRF

The VPD-0727Q2 from VidaRF is a 2 way power divider which operates from 698 to 2700 MHz. The 2 way divider has an insertion loss of 0.6 dB, an isolation of 20 dB and a VSWR of 1.30:1. It can handle up to 30 W of power and is matched to 50 Ohms. The power divider is available with QMA female connectors.
 
Download Datasheet | Product Details
 
Power Divider
Two Way Resistive Power Divider from 8 to 2300 MHz

Power Divider from AtlanTecRF

The BPR-008-2300-2 from AtlanTecRF is a 2 way resistive power divider that operates from 8 to 2300 MHz. The power divider has an insertion loss of 6.1 dB, isolation of 6 dB and a VSWR of 1.1:1. It can handle up to 100 mW of input power and is available in a module with SMA Female connectors.
 
Download Datasheet | Product Details
 
Between Series Coaxial Adapter
IP67 Between Series Adapters up to 6 GHz

Between Series Coaxial Adapter from Fairview Microwave

The IP67 between series adapters include 7/16 DIN to 4.1/9.5 mini-DIN, 7/16 DIN to Type-N and 4.1/9.5 mini-DIN to Type-N. They are ideal for use in the DAS, cellular, aviation and military industries. These adapters operate up to 6 GHz with a VSWR less than 1.25:1 and are IP67 rated, which means they use advanced ingress protection to make them virtually impenetrable to contaminants like dust, sand, and water.
 
Product Details
 
In Series Coaxial Adapter
IP67 In-Series Adapters up to 6 GHz

In Series Coaxial Adapter from Fairview Microwave

The IP67 in-series adapters include 7/16 DIN to 4.1/9.5 mini-DIN, 7/16 DIN to Type-N and 4.1/9.5 mini-DIN to Type-N. They are ideal for use in the DAS, cellular, aviation and military industries. These adapters operate up to 6 GHz with a VSWR less than 1.25:1 and are IP67 rated, which means they use advanced ingress protection to make them virtually impenetrable to contaminants like dust, sand, and water.
 
Product Details
 
TCXO
19 to 40 MHz TCXO for Mobile Devices

TCXO from Rakon

The RIT2016C from Rakon is a 1.2 V, 0.5 ppm TCXO which operates from 19 to 40 MHz. Its low supply voltage reduces power consumption with the additional benefit of the enable-disable mode to deliver better power management. It has a frequency versus temperature stability of ±0.5 ppm over -40 to 85°C, a low start up drift rate and greater than ±1ppm/year of stability. The TCXO is ideally suited for smart meters, PND, smart phones, tablets, GPS and fitness watches.
 
Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.