PREV 16 Sept, 2020 NEXT

New RF and Microwave Products this Week

16 Sept, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 16 Sept, 2020
 
Sponsored by Qorvo
 
 
 
New RF and Microwave Products this Week
RF Cable
Low Loss Cables with Triple Shielding Operate up to 40 GHz

RF Cable  from MegaPhase

The NextPhase Cables from Megaphase are Low Loss Cables that operate up to 40 GHz. They are designed for general-purpose interconnects that require low loss and triple shielding like ATE, ground and air-based EW applications. These cables provide over 90 dB of shielding effectiveness (cable only) and have a dielectric withstanding voltage of 15 kV at 60 Hz.
Download Datasheet | Product Details
RF Transistor
36 W Doherty RF Power GaN Transistor from 1800 to 2200 MHz

RF Transistor  from NXP Semiconductors

The A2G22S190-01S from NXP Semiconductors is a Doherty RF Power GaN Transistor that operates from 1800 to 2200 MHz. This class AB transistor delivers an output power of 36 watts with a power gain of over 16.5 dB and has a drain efficiency of 36.2%. It requires a DC supply of 48 V and consumes a current of up to 200 mA.
Download Datasheet | Product Details
RF Variable Attenuator
8-Channel Variable Attenuator System from 380 MHz to 30 GHz

RF Variable Attenuator  from Hytem

The 05.02.419 from Hytem is an 8-Channel Variable Attenuator System that operates from 380 MHz to 30 GHz. Each channel provides an attenuation from 0 to 30 dB in 1 dB steps, has an insertion loss of less than 15 dB can handle an input power of up to 24 dBm with a VSWR of less than 1.7:1. The attenuator system has a switching speed of 100 ms.
Download Datasheet | Product Details
V2X Module
5.9 GHz Automotive Grade 802.11p V2X Transceiver Modules

V2X Module  from u-blox AG

The VERA-P3 Series from u-blox are Automotive Grade 802.11p V2X Transceiver Modules that operate in the 5.9 GHz frequency band. These automotive-grade modules are based on the u-blox UBX-P3 chip for 802.11p, which offers superior RF performance and is qualified in accordance with the highly demanding AEC-Q100 grade 2 specification.
Download Datasheet | Product Details
Switch Matrix
40 x 8 Blocking Switch Matrix from 500 to 6000 MHz

Switch Matrix  from JFW Industries

The 50MS-340 from JFW Industries is a 40 x 8 Blocking Switch Matrix that operates from 500 to 6000 MHz. It can handle up to +23 dBm of input power, has an insertion loss of less than 21.9 dB, and provides input/input and output/output isolation of more than 100 dB. The matrix has a 200 ns switching speed. All ports of this switch matrix are bi-directional and the unused input/output ports are reflective.
Download Datasheet | Product Details
Switch Matrix
72 x 32 Non-Blocking Switch Matrix from 0.7 to 3 GHz

Switch Matrix  from Custom Microwave Components

The CMCI1116 from Custom Microwave Components is a 72 x 32 Non-Blocking Switch Matrix that operates from 0.7 to 3 GHz (0.7 to 6 GHz option also available). It can handle up to +43 dBm of input power, has an insertion loss of less than 30 dB, and provides an input/input and input/output isolation of more than 70 dB.
Download Datasheet | Product Details
Pick-off Tee
30 dBm Pick-Off Tee from DC to 20 GHz

Pick-off Tee  from HYPERLABS

The HL9461 from Hyperlabs is a Pick-Off Tee that operates from DC to 20 GHz. It can handle up to 30 dBm of input power, has a thru line insertion loss of 3.5 dB, and a pick-off line insertion loss of 10.5 dB. The device has an amplitude match of ±0.1 dB and a phase match of ±2° at 10 GHz. It can be used as a trigger source with minimum perturbation of the thru signal path.
Download Datasheet | Product Details
Sponsored by Qorvo
5G Systems
Qorvo Connects, Protects & Powers the 5G Systems All Around You
Qorvo is making 5G deployment a reality and supporting the growth of mobile data with a broad range of RF connectivity solutions. Our RF portfolio for both wireless infrastructure and mobile devices include PAs, phase shifters, switches, integrated modules and other high-performance RF solutions. Click here to learn more.
 
Beamforming IC
4-Channel Beamforming IC for 28 GHz 5G Phased-Array Applications

Beamforming IC  from Renesas

The F5280 from Renesas is a 4-channel Tx/Rx Half-Duplex Beamforming IC that operates from 25 to 31 GHz. It is designed using the SiGe BiCMOS process and features an internal temperature sensor. The core IC has very flexible gain and phase control on each channel to achieve fine beam steering and gain compensation between radiating channels.
Download Datasheet | Product Details
RF Amplifier
100 W LDMOS Solid-State Power Amplifier from 10 kHz to 1000 MHz

RF Amplifier  from Exodus Advanced Communications

The AMP2142DB-100 from Exodus Advanced Communications is an LDMOS Solid-State Power Amplifier that operates from 10 kHz to 1000 MHz. This Class A/AB amplifier delivers a minimum saturated output power of 100 W with a gain of more than 50 dB. It is suitable for all single channel modulation standards and has built-in protection circuits.
Download Datasheet | Product Details
RF Variable Attenuator
60 dB Voltage Controlled PIN Attenuator from 6 to 12 GHz

RF Variable Attenuator  from UMCC

The AG-Q000-HV from UMCC is a Voltage Controlled PIN Attenuator that operates from 6 to 12 GHz. It provides attenuation of up to 60 dB which can be controlled by a voltage range from 0 to 6 V, where each 1 V rise results in 10 dB of attenuation. The device has an insertion loss of less than 2.5 dB and a VSWR of under 1.5:1. It can handle up to 20 dBm of input power.
Download Datasheet | Product Details
Wireless SoC
Ultra-Low-Power Wi-Fi SoC for Battery-Powered IoT Devices

Wireless SoC  from Dialog Semiconductor

The DA16200 from Dialog Semiconductor is a Wi-Fi SoC that has been designed for battery-powered IoT devices. It consists of an integrated 802.11b/g/n radio (PHY), a baseband processor, a media access controller (MAC), on-chip memory, and a host networking application processor. The module is based on an ARM Cortex-M4 processor and requires a DC supply of 3.3 V for operation.
Download Datasheet | Product Details
RF Module
802.11 b/g/n 2.4 GHz Wi-Fi Module

RF Module  from TAIYO YUDEN (U.S.A.) Inc

The WYSACVLAY-XZ from TAIYO YUDEN is an IEEE 802.11b/g/n Wi-Fi Module that operates from 2412 to 2462 MHz. The module has a built-in application processor, WLAN front end, flash memory, Xtal, and supporting power circuits. This Wi-Fi module transmits up to 15 dBm of output power while operating at a voltage of 3.3 V.
Download Datasheet | Product Details
RF Module
2.4 GHz Bluetooth 5.2 Module for Industrial and Building Automation

RF Module  from Silicon Labs

The BGM220P from Silicon Labs is a 2.4 GHz Wireless Gecko Bluetooth Module that is designed and built to meet the performance, security, and reliability requirements of battery-powered IoT products. It supports Bluetooth 5.2 (BLE), direction-finding, and Bluetooth mesh low power node protocols. It delivers a Tx power of up to 8 dBm and has an Rx sensitivity of -98.9 dBm at 1 Mbps.
Download Datasheet | Product Details
RF Module
Bluetooth Low Energy (4.2) Module with 1 Mbps Data Rate

RF Module  from Amp'ed RF

The BLE60 from Amp'ed RF is a Bluetooth Low Energy (v4.2) module. It provides an output power of 4 dBm and has a receiving sensitivity of -92 dBm. This device requires a DC supply of 3.6 V and consumes a current of up to 13.3 mA in Tx mode and 13.6 mA in Rx mode. It has a data rate of 1 Mbps and supports 128-bit encryption security.
Download Datasheet | Product Details
Sponsored by Qorvo
 
 
 
Laminate
Low-Loss Laminate Material for RF & Microwave Applications

Laminate  from Isola Group

The IS680 AG-348 from Isola are Low-Loss Laminate Materials suitable for many commercial RF/microwave printed circuit designs. This substrate has a stable dielectric constant (Dk) of 3.48 between -55°C to +125°C up to W-band frequencies. It also has an ultra-low dissipation factor (Df) of 0.0029, making it an extremely cost-effective alternative to PTFE.
Download Datasheet | Product Details
RF Amplifier
C-Band Low Noise Amplifier from 4.4 to 5 GHz

RF Amplifier  from AmpliTech

The APT4-04400500-0715-D4-GW from AmpliTech is a C-band Low Noise Amplifier that operates from 4.4 to 5 GHz. It provides a gain of 35 dB with a noise figure of 0.6 dB and has a P1dB of 16 dBm. The amplifier requires a 12 V DC supply and draws up to 175 mA of current. It is available in a module with SMA male/female connectors.
Download Datasheet | Product Details
RF Amplifier
1500 W Solid-State Amplifier from 80 to 1000 MHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 1500W1000A from AR RF/Microwave Instrumentation is a self-contained, air-cooled, broadband, completely solid-state amplifier that operates from 80 to 1000 MHz. It provides more than 1500 W of power when used with an RF sweep generator with a gain of over 61.8 dB. This amplifier has been developed for applications where instantaneous bandwidth, high gain, and linearity are required.
Download Datasheet | Product Details
RF Amplifier
20 W Power Amplifier from 4.4 to 5 GHz

RF Amplifier  from RFcore

The RCA4450H44C1 from RFcore is a High Power Amplifier that operates from 4400 to 5000 MHz. It delivers a saturated output power of over 43 dBm with a small signal gain of more than 45 dB. The amplifier requires a DC supply voltage of 28 V and consumes up to 4 A of current. It is available in a module that measures 156 x 85 x 20 mm with SMA (F) connectors.
Download Datasheet | Product Details
Power Divider
4 Way Power Divider from 2 to 18 GHz

Power Divider  from VidaRF

The VPD-20180A4 from VidaRF is a 4 Way Power Divider that operates from 2 to 18 GHz. This power divider can handle up to 30 Watts of power, has an insertion loss of less than 1.8 dB, and provides isolation of over 17 dB. It has a low amplitude balance of 0.5 dB and phase balance of 12 degrees. Sealed and painted to meet IP65 standards, this power divider is available in a module with SMA-Female connectors.
Download Datasheet | Product Details
GPS/GNSS Antenna
Embedded Passive Patch Antenna for GNSS Applications

GPS/GNSS Antenna  from Taoglas

The HP5010A from Taoglas is an Embedded Passive Patch Antenna that supports GPS, GLONASS, Galileo, and BeiDou. The antenna has been tuned and tested on a 70 x 70 mm ground plane, working at GPS L1: 1575.42 MHz, L2: 1227.6 MHz, and L5: 1176.45 MHz. This patch is made from Terrablast, a revolutionary new material developed to meet the unique needs of the UAV and automotive industries.
Download Datasheet | Product Details
RF Amplifier
Low Noise Amplifier from 18 to 40 GHz

RF Amplifier  from Aelius Semiconductors

The ASL1032 from Aelius Semiconductors is a Low Noise Amplifier that operates from 18 to 40 GHz. It uses two stages of amplification to provide a gain of 12.5 dB with a noise figure of less than 3 dB and has a P1dB of 6 dBm. The device can handle up to +20 dBm of input power. It operates on a 2V/3V/4V DC supply and consumes 41 mA of current.
Download Datasheet | Product Details
Fixed Attenuator
3 dB Fixed Attenuator from DC to 6 GHz

Fixed Attenuator  from ANOISON

The ANO 51-0502-03 from Anoison is a fixed attenuator that operates from DC to 6 GHz. This 3 dB attenuator can handle up to 5 W of average power, 200 W of peak power, and has a VSWR of less than 1.2:1. It is available in a module with an N-type (M) connector at the input and an N-type (F) connector at the output.
Download Datasheet | Product Details
Base Station Antenna
6-Port Base Station Antenna from 698-894 MHz and 1695-2180 MHz

Base Station Antenna  from JMA Wireless

The MX06FRO440-02 from JMA Wireless is a 6-Port X-Polarization Base Station Antenna that operates from 698-894 MHz (2 ports) and 1695-2180 MHz (4 ports). This antenna delivers a gain of over 14.5 dBi and can handle up to 300 watts of power per port. It has a front-to-back ratio of over 25 dB and a VSWR of less than 1.5:1.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]