PREV 23 Sept, 2020 NEXT

New RF and Microwave Products this Week

23 Sept, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 23 Sept, 2020
 
Sponsored by Digi-Key
 
 
 
New RF and Microwave Products this Week
RF Spectrum Analyzer
Rugged 40 GHz Intelligent RF Receiver

RF Spectrum Analyzer  from CRFS

The RFeye Node 100-40 from CRFS is a Rugged Intelligent Wideband Receiver that operates from 9 kHz to 40 GHz. The receiver is a complete spectrum monitoring and geolocation system designed for remote deployment both indoors and outdoors and in hostile environments. It can be used for a wide range of applications including Military - Test range monitoring, EMCON Satellite monitoring, Upper 5G monitoring and for Technical Surveillance Counter Measures (TSCM).
Download Datasheet | Product Details
Antenna
High-Frequency Coaxial Helix Antenna from 55 to 65 GHz

Antenna  from Maja Systems

The SPL-60 from Maja Systems is a V-Band Coaxial Helix Antenna that operates from 55 to 65 GHz. It provides a gain of more than 10 dBi with an efficiency of over 70%. The antenna is available with both right-hand and left-hand circular polarization options. It can be used for waveguide antenna replacements, metrology, 5G mm-Wave T&M, and cost-sensitive applications.
Download Datasheet | Product Details
Cellular IoT Module
Tiny NB-IoT & LTE-M Module for Industrial Applications

Cellular IoT Module  from Thales

The TX62 from Thales is an LPWA IoT Module that supports LTE CAT-M1, NB1, and NB2 communication protocols. This IoT module introduces the new 'Things' footprint concept, which is specially developed for space-constrained applications that require a small size. It has an integrated GNSS module that supports GPS, Galileo, BeiDou, and GLONASS constellations and provides a steady stream of timing and location information for precise positioning of data.
Download Datasheet | Product Details
Termination
Cryogenic Termination from 4 to 12 GHz

Termination  from Low Noise Factory

The LNF-TERM4_12A from Low Noise Factory is a Cryogenic Termination that operates from 4 to 12 GHz. This termination can be used to convert a Low Noise Figure circulator into an isolator with a DC feed through. The DC voltage will be present at both the input and output of the isolator. It can handle up to 30 dBm of power and has a return loss of 20 dB.
Download Datasheet | Product Details
Front End Module
5150 to 5925 MHz Front End Module for Wi-Fi 6 Applications

Front End Module  from Qorvo

The QPF4550 from Qorvo is a Wi-Fi 6 Front End Module that operates from 5150 to 5925 MHz. It integrates a 5 GHz power amplifier (PA), single pole two throw switch (SP2T), and bypassable low noise amplifier (LNA) into a single device. The FEM has a compact form factor and an integrated matching that minimizes layout area requirements.
Download Datasheet | Product Details
Receiver
4-Channel Receiver Mixer from 10 to 40 GHz

Receiver  from Analog Devices

The ADAR2004 from Analog Devices is a 4-Channel Receiver Mixer with an RF frequency from 10 to 40 GHz, an LO frequency of 2.4 to 10.1 GHz, and an IF frequency from DC to 800 MHz. It has a gain range from 21 to 41 dB with a noise figure of less than 11 dB and an input P1dB of -20 dBm. This mixer requires a single 2.5 V supply and consumes 910 mW of power. It is ideal for applications such as millimeter-wave imaging (security, medical, industrial) and multichannel receivers.
Download Datasheet | Product Details
Antenna/OTA Test System
Compact Range Anechoic Chamber from 600 MHz to 110 GHz

Antenna/OTA Test System  from Anritsu

The MA8172A from Anritsu is a CATR (Compact Antenna Test Range) Anechoic Chamber that can be used from 600 MHz to 110 GHz. It uses the 3GPP-compliant CATR method to implement 5G NR OTA tests in a small space. This unit provides a shielding of over 60 dB and can incorporate FR2 In-band x 1, FR2 Link x 2 and LTE Link x 2 antennas.
Download Datasheet | Product Details
Sponsored by Digi-Key
6310-DX family
Digi Cellular Routers and Cellular Extenders
Digi provides commercial-level security at an affordable cost with cellular extenders. The Digi® EX15 and Digi® 6310-DX family of products deliver secure connectivity in a compact, all-in-one solution. Click here to learn more.
 
Cellular IoT Module
Multi-Band NB-IoT Module with Ultra-Low Power Consumption

Cellular IoT Module  from Quectel

The BC65 from Quectel is a multi-band LTE NB-IoT Module with extremely low power consumption. It provides a complete range of SMS and data transmission services to meet client-side demands through its in-built eSIM feature. It is available in an ultra-compact 17.7 x 15.8 x 2.2 mm LCC package that can easily be embedded into space-constrained applications and provides reliable connectivity.
Download Datasheet | Product Details
Antenna
Off-the-Shelf Embedded Antenna for CAT-M & NB-IoT Applications

Antenna  from Ethertronics

The 1004796 from Ethertronics is an Embedded LTE/LPWA Antenna that operates from 600 to 1000 MHz, 1700 to 2400 MHz and 2500 to 2700 MHz. It supports Broadband LTE (OCTA-BAND), LTE CAT-M, NB-IoT, SigFox, LoRa, Cellular LPWA, and RPMA technologies. The antenna utilizes Isolated Magnetic Dipole (IMD) technology to provide a reduced electrical footprint on any circuit board and has independent tuning capabilities for performance optimization.
Download Datasheet | Product Details
RF Amplifier
85 W GaN HEMT Power Amplifier MMIC from 2.7 to 3.8 GHz

RF Amplifier  from Wolfspeed, A Cree Company

The CMPA2738060F Wolfspeed is a GaN HEMT Power Amplifier MMIC that operates from 2.7 to 3.8 GHz. This MMIC uses a 2-stage reactively matched amplifier design which enables very high bandwidth. It provides an output power of up to 85 watts with a power gain of over 27.4 dB and has a PAE of up to 60%. The amplifier requires a 50 V DC Supply.
Download Datasheet | Product Details
Limiter
RF Power Limiter from 30 to 6000 MHz

Limiter  from Lotus Communication Systems

The LIM30M6G2W from Lotus Communication Systems is an RF Power Limiter that operates from 30 to 6000 MHz. It can handle up to 2 W of input power and provides up to +11.5 dBm of output power. The device has an insertion loss of less than 1.3 dB and a VSWR of lower than 1.6:1. It has a recovery time of 10 ns and a response time of 2 ns.
Download Datasheet | Product Details
RF Switch
SPDT Reflective Switch from 8 to 12 GHz

RF Switch  from Planar Monolithics Industries

The P2T-8G12G-40-R-570-TFF-1D5KW-120W from PMI is an SPDT Reflective Switch that operates from 8 to 12 GHz. It has an insertion loss of less than 2 dB, an isolation of 40 dB, and can handle 120 W of CW power (1.5 kW peak). The device has an input/output VSWR of under 1.8:1 and a switching speed of up to 1.25 µs. It has a pulse width of up to 250 µs and a duty cycle of 8%.
Download Datasheet | Product Details
RF Cable Assembly
Space Qualified RF Cable Assemblies from DC to 18 GHz

RF Cable Assembly  from W. L. Gore & Associates

The GNS-Y8 from W. L. Gore & Associates are Space Qualified Cable Assemblies that operate from DC to 18 GHz. These Space Cables and Assemblies have been designed for Low Earth Orbit (LEO) and Medium Earth Orbit (MEO) applications and are qualified according to NASA and ESA standards. They have a diameter of 4.8 mm and a minimum bend radius of 25.4 mm.
Download Datasheet | Product Details
RF Amplifier
16 W, 225 to 512 MHz Bi-Directional Amplifier

RF Amplifier  from NuWaves Engineering

The NW-BA-VU4GX02 from NuWaves is a Bidirectional VHF/UHF band Amplifier module that operates from 225 to 512 MHz. It provides a signal gain of 31 dB with a linear RF power of up to 16 watts while operating with 25% power efficiency. The BDA is ideal for extending the communication range of half-duplex transceivers running high peak-to-average waveforms such as OFDM.
Download Datasheet | Product Details
Sponsored by Digi-Key
Development Kit
Digi ConnectCore® 8M Nano Development Kit
The Digi/NXP ConnectCore 8M Nano dev kit integrates memory, Digi Microcontroller Assist™ power management, pre-certified wireless connectivity, and advanced Digi TrustFence® device security with a complete, open-source Linux software platform based on the Yocto Project®. Click here to learn more.
 
Directional Coupler
Directional Coupler from 617 to 5925 MHz for 5G DAS Applications

Directional Coupler  from Microlab

The CC-605E from Microlab is a Directional Coupler that operates from 617 to 5925 MHz. It has a coupling factor of 5 dB and directivity of 17 dB and has a low PIM of -161 dBc. The coupler can handle 300 W of average power and 1 kW of peak power with a VSWR of 1.3:1. This RoHS-compliant coupler is available in a module that measures 5.53 x 1.64 x 1.10 inches.
Download Datasheet | Product Details
Signal Generator
Multi-Channel Signal Generator from 8 kHz to 20 GHz

Signal Generator  from Berkeley Nucleonics Corp

The 825-M from Berkeley Nucleonics Corporation is a Multi-Channel Signal Generator that operates up to 20 GHz. It combines a fast switching speed of 200 µs (5 µs with Option FS) with a good phase noise under -120 dBc/Hz and signal quality. It can provide power levels of up to 18 dBm. This multi-channel version 825-M-20-X is available in 1, 2, 3, or 4 channel configurations.
Download Datasheet | Product Details
Phase Noise Analyzer
10 MHz to 26 GHz Real-Time Phase Noise Analyzer

Phase Noise Analyzer  from Holzworth Instrumentation

The HA7062D from Holzworth is a real-time phase noise analysis system that operates from 10 MHz to 26 GHz (optional to 40 GHz). It provides measurement offsets from 0.1 Hz to 100 MHz. It is available in a fully shielded, fan-less 1U chassis that completely eliminates ground loops and troublesome microphonics for uncompromised performance and repeatability.
Download Datasheet | Product Details
Vector Network Analyzer
2-Port Metrology Grade Vector Network Analyzer from 300 kHz to 4.5 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The M5045 from Copper Mountain Technologies is a 2-port metrology-grade Vector Network Analyzer that operates from 300 kHz to 4.5 GHz. It delivers metrology-grade performance in an economical package and as a result excludes several advanced features: vector mixer calibration, TRL calibration, frequency offset, time domain, and gating.
Download Datasheet | Product Details
RF Amplifier
Multi-Octave 41 W Power Amplifier from 1 to 6 GHz

RF Amplifier  from Microwave Systems JSC

The MS010620 from Microwave Systems is a Multi-Octave High Power GaN Amplifier that operates from 1 to 6 GHz. It provides a saturated output power of 41 Watts with a small signal gain of over 55 dB which can be controlled digitally. This wideband amplifier has a built-in output power detector. It is available in a hermetically sealed package that measures 6.62 x 3.08 x 0.93 inches with SMA Female connectors.
Download Datasheet | Product Details
RF Shielded Test Enclosure
Stand Alone RF Tunnel Shielded Box from 20 MHz to 40 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-3590 from RF Electronics is a Stand Alone RF Tunnel Shielded Box that operates from 20 MHz to 40 GHz. This fully portable design is equipped with caster wheels for ease of movement. The interior of this enclosure measures 650 mm (W) X 650 mm (H) X 2050 (L). It has a thick RF absorbing foam that provides isolation of more than 120 dB @ 3 GHz.
Download Datasheet | Product Details
Power Divider
30 Watt, 4 Way Power Divider from 6 to 40 GHz

Power Divider  from MECA

The 804-5-23.000 from MECA is a 4-way power divider that operates from 6 to 40 GHz. This mm-Wave power divider can handle up to 30 watts of power, has an insertion loss of 2.6 dB and isolation over 13 dB. It is available in a module with 2.4 mm connectors.
Download Datasheet | Product Details
RF Transceiver
E-band Transceiver Module from 71 to 86 GHz

RF Transceiver  from Filtronic

The Morpheus II from Filtronic is an E-band RF Transceiver that provides a turn-key solution for carrier-grade mobile XHaul applications. This transceiver has integrated Tx/Rx modules that operate from 71-76 / 81-86 GHz and features a diplexer that can be interfaced with an antenna. It contains all transmit and receive functions necessary for the RF section of an E-band link and provides a simple connection to a high data rate full-duplex modem.
Download Datasheet | Product Details
RF Duplexer
VHF Base Station Duplexers from 150 to 174 MHz

RF Duplexer  from Comprod

The 66-13-44RE from Comprod is Base Station Duplexers that operate from 150 to 174 MHz. They are ideal for compact high-performance VHF applications. These filters are designed for the combination of two frequencies that require extra isolation or can be used as an efficient preselector. These duplexers use four 4 x 4 x 10 inch pass-reject cavities.
Download Datasheet | Product Details
Voltage Controlled Oscillator
Voltage Controlled Oscillator from 10 to 20 GHz

Voltage Controlled Oscillator  from Synergy Microwave Corporation

The DCYS10002000-5 from Synergy Microwave is a Voltage Controlled Oscillator that operates from 10 to 20 GHz. It delivers more than -4 dB of output power and has a typical phase noise of -90 dBc/Hz at 100 kHz offset. The VCO has a tuning voltage range from 0.5 to 12 VDC with a sensitivity of 300 to 1700 MHz/V. It has sub-harmonics of 7 dB and requires a bias voltage of +5.5 V.
Download Datasheet | Product Details
Antenna
LTE/4G Blade Antenna from 698 to 960 / 1710 to 2655 MHz

Antenna  from Abracon LLC

The AEACCA115021-S698 from Abracon is a 4G/LTE Cellular Band Blade Antenna that operates from 698 to 960 MHz and 1710 to 2655 MHz. This linearly polarized antenna delivers a gain of 2 dBi and can handle up to 10 W of input power with a VSWR of less than 2:1. It is available with an RG174 cable that is 3 meters in length and has an SMA connector.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, upcoming events, webinars, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]