1. everything RF
  2. RF Newsletters
more
PREV 30 Sept, 2020 NEXT

New RF and Microwave Products this Week

30 Sept, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 30 Sept, 2020
 
Sponsored by TAIYO YUDEN
 
 
 
New RF & Microwave Products this Week
RF Amplifier
Compact Low Noise Gain Block Amplifier from DC to 22 GHz

RF Amplifier  from Atlanta Micro

The AM1102 from Atlanta Micro is a Cascadable Low Noise Amplifier that operates from DC to 22 GHz. It provides a gain of over 14 dB with a noise figure of less than 2.3 dB and has a P1dB of 15 dB. This gain block has an OIP3 of 26 dBm and requires a DC supply of 3.3 V for operation. It is available in a 3 mm QFN package and is ideally suited for low SWaP applications.
Download Datasheet | Product Details
RF Amplifier
38.5 dBm GaN HEMT Amplifier from 16 to 20.8 GHz

RF Amplifier  from Northrop Grumman

The APN293 from Northrop Grumman is a Monolithic GaN HEMT Amplifier that operates from 16 to 20.8 GHz. It provides a saturated output power of 38.5 dBm with a gain of over 10 dB and has a PAE of more than 30%. It is available as a die that measures 9 sq. mm and is ideal for military SATCOM, point-to-point radio, point-to-multipoint communications, terminal amplifiers, and phased-array radar applications.
Download Datasheet | Product Details
RF Amplifier
7 W Solid-State Power Amplifier from 1 to 2.5 GHz

RF Amplifier  from NuWaves Engineering

The NW-PA-LS-5-MI01 from NuWaves is a Micro L & S-Band Solid-State Power Amplifier that operates from 1 to 2.5 GHz. It provides a saturated output power of 7 watts and a gain of over 41 dB with an efficiency of 35 %. This amplifier requires a supply voltage of 26 to 30 VDC and consumes less than 1.25 A of current. It is available in a rugged aluminum module that measures 1.8 x 1.8 x 0.5 inches with SSMC female connectors.
Download Datasheet | Product Details
RF Amplifier
60 dB Low Noise Amplifier from 6.7 to 7.75 GHz

RF Amplifier  from AmpliTech

The APTW6-06700775-50K10-112-D6 from AmpliTech is a Low Noise Amplifier that operates from 6.7 to 7.75 GHz. It provides a gain of more than 60 dB, has a noise figure of under 0.7 dB, a noise temperature of less than 50 K, and a P1dB of +10 dBm. The LNA requires a DC supply voltage of 15 V and typically consumes 225 mA of current.
Download Datasheet | Product Details
RF Spectrum Analyzer
Real-time Spectrum Analyzers Up to 6.5 GHz

RF Spectrum Analyzer  from RIGOL Technologies

The RSA5000 from RIGOL is a Real-Time Spectrum Analyzer. It is available in two frequency configurations 9 kHz to 3.2 GHz and 9 kHz to 6.5 GHz. The analyzer has a Real-Time Analysis Bandwidth of 25 MHz with 1 Hz Resolution Bandwidth and 7 Real-Time visualization modes. It has a 10.1” Capacitive touchscreen display with an intuitive control interface.
Download Datasheet | Product Details
Vector Network Analyzer
2-Port Vector Network Analyzer from 10 MHz to 43.5 GHz

Vector Network Analyzer  from Keysight Technologies

The 5234B from Keysight is a 2-Port Vector Network Analyzer that operates from 10 MHz to 43.5 GHz. It is designed for S-parameter and simple nonlinear testing of passive components, amplifiers, and frequency converters. The analyzer provides an excellent price-to-performance ratio for microwave manufacturing and measures S-parameters with good accuracy in cost-sensitive applications.
Download Datasheet | Product Details
RF Test Set
5G FR1 Sub-6 GHz Cellular Test System

RF Test Set  from LitePoint

The IQxstream-5G from Litepoint is a multi-DUT manufacturing test solution with 200 MHz of contiguous bandwidth for physical layer testing across the 5G NR Sub-6 GHz frequency range. This high performance, compact platform also supports 2G/3G/4G cellular technologies and is ideal for user equipment (UE) applications such as smartphones, tablets and laptops.
Download Datasheet | Product Details
Sponsored by TAIYO YUDEN
TAIYO YUDEN
Get Your Components Prepared for Your Next Projects with TAIYO YUDEN
TAIYO YUDEN offers a broad lineup of small size, low profile, high capacitance value, and high reliability MLCC products. Our unique technologies of materials, thin film and multilayering technique enable us to realize industry-leading solutions of ultra-small, ultra-thin, highly reliable lineups with large capacitance. Click here to learn more.
 
Frequency Synthesizer
10 MHz to 6.7 GHz RF Synthesizer Module

Frequency Synthesizer  from Holzworth Instrumentation

The HSM6001B from Holzworth Instrumentation is an RF synthesizer module that operates from 10 MHz to 6.7 GHz. It is a microwave CW source that is architected on a non-PLL based platform. The digital-analog hybrid design provides excellent phase noise performance and spurious response, which compliments the phase coherent nature of this digital-analog hybrid signal source.
Download Datasheet | Product Details
Frequency Synthesizer
Low Phase Noise Frequency Synthesizer from 0.2 to 20 GHz

Frequency Synthesizer  from ERAVANT

The SOT-02220313200-SF-B6 from ERAVANT is a Frequency Synthesizer Module that operates from 0.2 to 20 GHz. It has a frequency stability of ±0.2 ppm and low phase noise of less than -115 dBc/Hz. The model is externally referenced with an internal reference backup and has a frequency resolution of 0.1 Hz.
Download Datasheet | Product Details
Wireless SoC
Low-Power, High-Performance SoC for 4G LTE and 5G Applications

Wireless SoC  from Octasic Inc

The OCT3032W from Ocstasic is a high-performance, low-power SoC for 4G LTE and 5G applications. The SoC supports 5G New Radio (NR) for both Non-Standalone (NSA) and Standalone (SA) deployments with throughputs up to 800/300 Mbps for downlink/uplink. The OCT3032W comprises of up to 32 Opus3 DSP cores, a wireless accelerator group, a CPU, 18 MB of internal memory, and various peripheral interfaces.
Download Datasheet | Product Details
RF Module
LoRa Transceiver Module for M2M and IoT Edge Nodes Applications

RF Module  from Murata

The CMWX1ZZABZ-078 from Murata is LoRa Transceiver Module that operates from 860 to 930 MHz. It is based on the Semtech SX1276 ultra-long range spread spectrum wireless transceiver and an STMicroelectronics STM32L0 series ARM Cortex-M0+ 32-bit microcontroller (MCU). The transceiver has an integrated TCXO which exhibits robust low drift thermal characteristics and provides an accurate clock source for the RF transceiver.
Download Datasheet | Product Details
Cellular IoT Module
LTE CAT-M Module for Wearable Devices and Asset Tracking

Cellular IoT Module  from Fibocom

The MA510-GL from Fibocom is an LTE CAT-M Module that supports LTE Cat-M1, Cat-NB2, and EGPRS communication protocols. It is based on the Qualcomm IoT platform and has an in-built GNSS module. This IoT module requires a DC supply from 3.3-4.5 V and supports eDRX / PSM low power modes with a current consumption of up to 3.2 uA (PSM mode).
Download Datasheet | Product Details
Front End Module
5 GHz Front-End Module for 802.11ax Applications

Front End Module  from Skyworks Solutions

The SKY85747-11 from Skyworks is a 5 GHz Front-End Module for 802.11ax networking and WLAN-enabled wireless video streaming systems. It incorporates a transmit/receive (T/R) switch, a high-gain low-noise amplifier (LNA) with bypass, and a power amplifier (PA). The FEM has a transmit gain of 34.5 dB, receive gain of 16 dB, and requires a supply voltage of 5.5 V.
Download Datasheet | Product Details
Block Up Converter
20 W Dual-Band Block Upconverter from 17.3 to 18.1 and 18.1 to 18.4 GHz

Block Up Converter  from Amkom Design Group Inc

The AMKD20 from AMKOM is a DBS-Band Block Up Converter that up-converts an input frequency from 950-1750 MHz and 1400-1700 MHz to an output frequency from 17.3-18.1 GHz and 18.1-18.4 GHz. It provides a saturated output power of 20 W (43 dBm) and a linear power of 16 W (42 dBm) with a gain of over 69 dB. This BUC has a switchable 16.35 GHz and 16.70 GHz Local Oscillator with an external auto-sensing reference of 10 MHz.
Download Datasheet | Product Details
Sponsored by TAIYO YUDEN
 
 
 
Power Divider
3-Way Power Divider from 2 to 5.12 GHz

Power Divider  from American Microwave Corporation

The PDV-3W01 from American Microwave Corporation is a 3-Way Power Divider that operates from 2 to 5.12 GHz. It has an insertion loss of less than 0.8 dB, provides isolation of over 16 dB, and can handle an average power of up to 4 watts. It has a phase imbalance of 5 degrees and an amplitude imbalance of 0.6 dB. When used as a combiner this device can handle up to 4 watts of power at each port.
Download Datasheet | Product Details
RF Tapper
350 W Uneven RF Power Splitter from 150 to 1000 MHz

RF Tapper  from Werlatone Inc

The C5878 from Werlatone is an Uneven RF Power Splitter that operates from 150 to 1000 MHz. It can handle up to 350 W of input power, provides a coupling of 6 dB (± 1 dB variation) and has an insertion loss of less than 0.5 dB. This non-isolated tapper is utilized to un-evenly split a single run of 50-ohm coaxial cable hosting multiple frequency bands. It is available in a module that measures 7.6 x 8.4 x 1.5 inches with coaxial connectors.
Download Datasheet | Product Details
RF Amplifier
500 W Class A Power Amplifier from 20 to 1000 MHz for EMC Testing

RF Amplifier  from Prana

The N-LT 500 from Prana is a Solid-State Power Amplifier that operates from 20 to 1000 MHz. This Class A amplifier delivers a typical CW output power of 500 W with a gain of 54 dB. It requires a 200-250 V AC supply and consumes 11.1 A of current. The amplifier has a touch-screen color LCD display which shows the status and faults and is available with various interface options: ethernet, USB, GPIB, and RS232.
Download Datasheet | Product Details
RF Amplifier
750 Watt Solid-State Amplifier from T&M Applications from 80 to 1000 MHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 750W1000B from AR RF/Microwave Instrumentation is a Solid-State Amplifier that operates from 80 to 1000 MHz. This self-contained, air-cooled amplifier when used with an RF sweep generator, provides more than 750 watts of power with a gain of over 58.8 dB. This class A amplifier has a Digital Control Panel (DCP) from where the gain and power level can be controlled.
Download Datasheet | Product Details
GNSS Module
High Precision GNSS Module for GIS and UAV Applications

GNSS Module  from Unicore Communications

The UM482 from Unicore Communications is a multi-band GNSS module with integrated multi-band Real Time Kinematics (RTK) technology for light-weight robots, GIS, intelligent driving, and UAV applications. It concurrently uses GNSS signals from BDS B1/B2, GPS L1/L2, GLONASS L1/L2, Galileo E1/E5b, and QZSS L1/L2 constellations. It requires a DC supply of 3.3 V and consumes 2.4 W of power.
Download Datasheet | Product Details
GPS/GNSS Antenna
Magnetic Mount GNSS Antenna for UAV and Civil Aviation Applications

GPS/GNSS Antenna  from 2J Antennas

The 2JC01MC2F from 2J Antennas is a Magnetic Mount GNSS L1/L2 Antenna that operates at 1227 MHz and 1561-1606 MHz. It supports GPS (L1C), GPS (L2C), GLONASS (L1OF), BeiDou (B1), QZSS (L1C), QZSS (L2C), Gallielo (E1), and SBAS (L1) standards and is designed for high precision centimeter-level accuracy.
Download Datasheet | Product Details
RF Switch
Non-Reflective SP15T Switch from 5.3 to 7.5 GHz

RF Switch  from KRATOS General Microwave

The PA-2750-CO from Kratos is an Absorptive SP15T Switch that operates from 5.3 to 7.5 GHz. It can handle up to 200 mW of CW input power, has an insertion loss of less than 4.5 dB, and provides isolation of more than 50 dB. The switch has an ON/OFF time of less than 100 nsec with a switching speed of 0.1 us. It features a 4-bit internal decoder and has an integrated driver which requires +5 V and -12 V power supplies.
Download Datasheet | Product Details
RF Switch
Benchtop 2x SP6T RF Switch Assembly from DC to 18 GHz

RF Switch  from JFW Industries

The 50SA-232 from JFW Industries is an RF switch module that consists of 2 individually controlled SP6T switches that operate from DC to 18 GHz. Each switch has an insertion loss of less than 0.5 dB and provides isolation of over 70 dB. They can handle up to 100 Watt of input power at 4 GHz and have a switching speed of up to 20 ms.
Download Datasheet | Product Details
Diplexer
2 x 6 Resonator Band-Pass Duplex Filter for TETRA 380 - 400 MHz and 410 - 430 MHz

Diplexer  from Amphenol Procom

The DPBP 70/3333-20-TETRA from Amphenol Procom is a 2 x 6 Resonator Bandpass Duplex Filter designed to combine TETRA 380 - 400 MHz and 410 - 430 MHz to one common feeder. It has an insertion loss of less than 0.7 dB and provides an isolation of more than 60 dB in the stopband. The filter can handle up to 200 W of input power and has a VSWR of less than 1.5:1.
Download Datasheet | Product Details
RF High Pass Filter
Suspended Stripline High Pass Filter from 18 to 40 GHz

RF High Pass Filter  from Anatech Electronics

The AE18000SSH6615 from Anatech Electronics is a Suspended Stripline High Pass Filter with a cut-off frequency of 18 GHz and a passband from 18 to 40 GHz. The filter has an insertion loss of less than 2 dB with a rejection of more than 50 dB at 15 GHz. It can handle an input power of up to 15 W. This high pass filter is available in a module that measures 12.7 x 12.7 x 10.0 mm with SMA female connectors.
Download Datasheet | Product Details
Voltage Controlled Oscillator
Low Phase Noise VCO from 2400 to 2485 MHz

Voltage Controlled Oscillator  from Z-COMM

The USSP2400-LF from Z-COMM is a Voltage Controlled Oscillator that operates from 2400 to 2485 MHz. The device can be tuned over a voltage range of 0.5 to 2.5 Vdc with a tuning sensitivity of 120 MHz/V. It has a phase noise of -83 dBc/Hz @10 kHz offset. The VCO requires a DC supply voltage of 2.7 V and consumes up to 9 mA of current.
Download Datasheet | Product Details
RF Transistor
180 W GaN HEMT Amplifier from 1.2 to 1.4 GHz

RF Transistor  from United Monolithic Semiconductors

The CHZ180AaSEB from United Monolithic Semiconductors is an L-Band GaN HEMT Transistor that operates from 1.2 to 1.4 GHz. It provides 180 W of saturated output power with a gain of 20 dB and has a PAE of 52%. This pulsed device has a pulse width of 3 ms and a duty cycle of 20%. The CHZ180AaSEB is manufactured using a GaN HEMT process with 0.5µm gate length and is based on Quasi-MMIC technology.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, articles, white papers, interviews, and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]