1. everything RF
  2. RF Newsletters
more
PREV 21 Oct, 2020 NEXT

New RF and Microwave Products this Week

21 Oct, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 21 Oct, 2020
 
Sponsored by CRFS
 
 
 
New RF and Microwave Products this Week
RF Switch
High Isolation SP5T Switch from 0.4 to 6 GHz

RF Switch  from Infineon Technologies

The BGS15MU14 from Infineon is a high isolation SP5T CMOS Switch that operates from 0.4 to 6 GHz. It is a perfect fit for concurrent transmit chains in LTE Uplink-Carrier Aggregation and MIMO RF design scenarios on input port feedback receive (FBRx). The switch can handle up to 23 dBm of peak input power, has an insertion loss of less than 1.5 dB, and provides port-to-port isolation of up to 63 dB (@1 GHz).
Download Datasheet | Product Details
RF Switch
SP25T Non-Reflective Switch Matrix From 0.5 to 18 GHz

RF Switch  from American Microwave Corporation

The MSN-0518-25T-30DB-HERM-1JV from American Microwave Corporation is an SP25T Switch Matrix that operates from 0.5 to 18 GHz (can be extended up to 40 GHz). This non-reflective absorptive switch has an insertion loss of less than 10 dB, isolation of over 60 dB, and a switching time of less than 2 us. The switch requires a power supply of +5/-12 VDC and consumes up to 220 mA of current.
Download Datasheet | Product Details
RF Variable Attenuator
8-Bit Digitally Controlled Attenuator from 6 to 12 GHz

RF Variable Attenuator  from UMCC

The AG-Q000-HD from UMCC is a Digitally Controlled PIN Attenuator that operates from 6 to 12 GHz. This 8-bit attenuator provides an attenuation of up to 60 dB with an LSB of 0.25 dB and has a settling time of 500 ns. It has an insertion loss of less than 2.5 dB and a VSWR of 1.5:1. This attenuator can handle up to 20 dBm of average power.
Download Datasheet | Product Details
RF Amplifier
7 W Solid-State Power Amplifier from 1 to 2.5 GHz

RF Amplifier  from NuWaves Engineering

The NW-PA-LS-5-MI01 from NuWaves is a Micro L & S-Band Solid-State Power Amplifier that operates from 1 to 2.5 GHz. It provides a saturated output power of 7 watts and a gain of over 41 dB with an efficiency of 35%. This amplifier requires a supply voltage of 26 to 30 VDC and consumes less than 1.25 A of current.
Download Datasheet | Product Details
RF Amplifier
8 W GaN Hybrid Power Amplifier from 1930 to 1995 MHz

RF Amplifier  from RFHIC

The RTH19008S-30 from RFHIC is a GaN Hybrid Power Amplifier that operates from 1930 to 1995 MHz. It provides an output power of 8 W with a gain of 31.5 dB and has a high efficiency of 45%. The amplifier is fully matched to 50 ohms with integrated DC blocking caps on both RF ports to simplify system integration. It is ideal for 4G LTE systems, small cells, and metro cell base station applications.
Download Datasheet | Product Details
RF Amplifier
300 W GaN Solid-State Power Amplifier from 0.7 to 6 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP2030A from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 0.7 to 6 GHz. It delivers 300 W of saturated output power with a gain of more than 53 dB and has a P1dB of 200 W. The amplifier has 2-tone intermodulation (IMD) of -30 dBc, spurious of -60 dBc, and harmonics of -20 dBc.
Download Datasheet | Product Details
Sponsored by CRFS
CRFS
RFeye Node 100-40, the world’s first rugged 40GHz RF receiver
With a 9kHz-40GHz frequency range and a 100MHz instantaneous bandwidth, the RFeye 100-40 answers the needs of customers who are looking to monitor higher frequencies, and not just in the test lab, but in the real world. Click here to learn more.
 
RF Variable Attenuator
48-Channel USB/Ethernet Programmable RF Attenuator from 50 to 8000 MHz

RF Variable Attenuator  from Adaura Technologies

The AD-USB48AR38G95 from ADAURA Technologies is 48-Channel USB/Ethernet Programmable Attenuator that operates from 0.050 to 8 GHz. It has an attenuation range from 0 to 95 dB with a step size of 0.25 dB. The attenuator has an insertion loss of less than 12.4 dB with interchain isolation over 110 dB. It can be powered over Ethernet or via a USB port and supports Telnet and HTTP protocols and is available in a 4U rackmount enclosure with coaxial connectors.
Download Datasheet | Product Details
Vector Network Analyzer
Multiport Network Analysis Solution for MIMO and 5G Applications

Vector Network Analyzer  from Copper Mountain Technologies

The RNVNA from Copper Mountain Technologies is a customizable Multiport Network Analysis Solution for MIMO antennas and other 5G applications. It has been built using CMT 1-Port USB vector network analyzers and operates over a frequency of 1 MHz to 18 GHz. This test setup links up to 16 analyzers together into a multiport network analysis system, allowing users to measure vector reflection and scalar transmission parameters.
Download Datasheet | Product Details
Cellular Module
Multi-Band LTE Cat 1 Module

Cellular Module  from SIMCom

The A7600E from SIMCom is a Multi-Band LTE Cat 1 Module that supports LTE-FDD / LTE-TDD / GSM / GPRS / EDGE. The module supports a 10 Mbps downlink rate and a 5 Mbps uplink rate. It supports multiple built-in network protocols and has USB drivers for Windows, Linux and Android. The module requires a DC supply of 3.8 V.
Download Datasheet | Product Details
Frequency Synthesizer
Frequency Synthesizer with Integrated VCO from 54 to 6800 MHz

Frequency Synthesizer  from Analog Devices

The ADF4355 from Analog Devices is a PLL based Frequency Synthesizer that provides output frequency from 54 to 6800 MHz. It has an integrated VCO and a series of frequency dividers that enable it to generate an output frequency as low as 54 MHz. The device allows the implementation of fractional-N and integer-N synthesizers when used with an external loop filter and an external reference frequency.
Download Datasheet | Product Details
RF Switch
4xSPST Switch for Antenna Tuning from 0.6 to 6 GHz

RF Switch  from Skyworks Solutions

The SKY59272-707LF from Skyworks is a 4xSPST Switch that operates from 0.6 to 6 GHz. It is designed for antenna tuning applications that require ultra-low ON resistance and low OFF capacitance. Switching is controlled by an integrated Mobile Industry Processor Interface (MIPI) v2.1 controller. This switch offers excellent performance and ultra-high linearity for 5G, LTE, or GSM smartphones, where high-performance aperture tuning is required.
Download Datasheet | Product Details
RF Amplifier
WR-19 Waveguide Amplifier from 40 to 60 GHz

RF Amplifier  from AT Microwave

The AT-PA-4060-1820 from AT Microwave is a U-band Waveguide Amplifier that operates from 40 to 60 GHz. It provides a saturated output power of 20 dBm with a gain of over 16 dB. This amplifier requires a supply voltage of 5V and consume up to 500 mA of current. It is available in a module that measures 60 x 30 x 30 mm and has a WR-19 waveguide interface at the input and output.
Download Datasheet | Product Details
Sponsored by CRFS
 
 
 
RF Transistor
1000 W LDMOS Power Transistor from 470 to 860 MHz

RF Transistor  from Ampleon

The BLF989E from Ampleon is a UHF LDMOS Power Transistor that operates from 470 to 860 MHz. It provides a peak output power of more than 1000 W and an average (DVB-T) output power of 180 W. The transistor is designed for asymmetrical broadcast Doherty transmitter applications and delivers a gain of 20 dB with a drain efficiency of up to 52%.
Download Datasheet | Product Details
RF Transistor
8 W GaN HEMT from DC to 15 GHz

RF Transistor  from Wolfspeed, A Cree Company

The CGHV1F006S from Wolfspeed is an unmatched, GaN HEMT that operates from DC to 15 GHz. The transistor can be used for L, S, C, X, and Ku-band amplifier applications. It provides an output power of 8 watts with a gain of 15 dB at 9 GHz. The GaN HEMT operates on a 40-volt rail circuit and is available in a 3 x 4 mm, surface-mount, dual-flat-no-lead (DFN) package.
Download Datasheet | Product Details
RF Amplifier
Low Noise Cryogenic Amplifier from 0.1 to 4 GHz

RF Amplifier  from AmpliTech

The APTC-00100400-1200-D4 from AmpliTech is a Low Noise Cryogenic Amplifier that operates from 0.1 to 4 GHz. It provides a gain of 28 dB with a noise figure of 1.2 dB and has a P1dB of 0 dBm. The amplifier is available in a module with coaxial connectors.
Download Datasheet | Product Details
RF Module
Multi-Protocol Bluetooth LE / NFC Combo Module

RF Module  from Laird Connectivity

The BL654PA from Laird Connectivity is a wireless module that supports Bluetooth Low Energy (BLE 5.1) and NFC. This module is powered by the Nordic nRF52840 Silicon SoC that provides a secure and robust BLE connection and Cortex-M4F CPU for any OEM product design. It has an integrated Power Amplifier from Skyworks that provides an output power of up to 18 dBm.
Download Datasheet | Product Details
GNSS Module
High Precision, Multi-frequency, Multi-Constellation GNSS Receiver

GNSS Module  from Septentrio

The AsteRx-m3 Pro from Septentrio is a Multi-Band, Multi-Constellation GNSS Receiver that is specifically designed for the needs of mass-market applications like robotics and autonomous systems. This high precision GNSS receiver delivers reliable and robust centimeter-level accuracy (RTK) in challenging environments with both single and dual antenna modes.
Download Datasheet | Product Details
GNSS Module
Multi-Constellation GNSS Module for Mission Critical Applications

GNSS Module  from Telit Communications

The SE868 V3 from Telit is a multi-constellation GNSS Module that supports GPS, GLONASS, Beidou, Galileo, and SBAS, making it a high-performance position reporting and navigation solution. The module navigates to -161 dBm and tracks to -165 dBm, providing improved performance (0.01 m/s) in harsh environments. It also supports ephemeris file injection (A-GPS).
Download Datasheet | Product Details
VNA Calibration Kit
Low PIM Calibration Kit from 300 to 6000 MHz

VNA Calibration Kit  from RD Microwaves

The CK-09 Series from RD Microwaves is a Low PIM Calibration Kit that operates from 300 to 6000 MHz. The PIMOSL (low PIM load, Open, Short, and resistive Load) is designed for bench or field sweep tests on low PIM systems and is available in an impact-resistant module with 7-16 DIN, 4.3-10, and N-Type connector options. It has a 40 W low PIM termination, a 2 W resistive termination, and an open and short port.
Download Datasheet | Product Details
Directional Coupler
10 dB Surface Mount Directional Coupler from 2 to 18 GHz

Directional Coupler  from Knowles

The FPC09291 from Knowles is a Wide Band Wire Bondable (WB) Directional Coupler that operates from 2 to 18 GHz. This 10 dB coupler uses DLI’s high dielectric ceramic materials to provide a small size device with minimal performance variation over temperature. It has an insertion loss of less than 1.2 dB and directivity of over 10 dB. This coupler is available in a surface-mount package that measures 12.7 x 3.81 x 0.76 mm.
Download Datasheet | Product Details
Band Pass Filter
Cavity Bandpass Filter from 92.5 to 107.5 MHz

Band Pass Filter  from JQL Electronics

The JFLC0092T0108SF from JQL Electronics is a Cavity Bandpass Filter with a passband from 92.5 to 107.5 MHz and a center frequency (Fc) of 100 MHz. It has an insertion loss of less than 2 dB in the passband and provides rejection of over 60 dB at 70 and 130 MHz. The filter is available in a module with SMA (F) connectors.
Download Datasheet | Product Details
Microwave Backhaul Radio Links
2.6 Gbps E-Band Microwave Backhaul Radio from 71-76 and 81-86 GHz

Microwave Backhaul Radio Links  from Star Microwave Service Corporation

The SMC-80G2500EL-1FT from Star Microwave is an E-Band Microwave Backhaul Radio from 71-76 GHz and 81-86 GHz. It has a channel bandwidth of 250 MHz and 500 MHz and supports QPSK/16-QAM/32-QAM/64-QAM/128-QAM/256-QAM hitless ACM (Adaptive Coding and Modulation) modulation schemes. The radio provides an air interface capacity of up to 2.6 Gbps and an ethernet throughput of 2.6 Gbps in a 1+0 configuration.
Download Datasheet | Product Details
Antenna
Multi-Band Virtual Antenna for IoT Applications

Antenna  from Fractus Antennas

The RUN mXTEND (NN02-224) from Fractus Antennas is an Off-the-Shelf IoT Antenna that operates from 824 to 960 MHz and 1710 to 2690 MHz. This omnidirectional antenna delivers a gain of over 1.8 dBi with an average efficiency of more than 70%. It is linearly polarized and has a VSWR of less than 3:1. It is available as an extremely small chip that measures 12 x 2.4 x 3 mm.
Download Datasheet | Product Details
RFID Tag
Robust UHF RFID Tag for Industrial Markets

RFID Tag  from IdTronic

The Apollo Tag from iDTRONIC is a UHF RFID Tag that operates from 865 to 868 MHz (EU) and 902 to 928 MHz (US). This linearly polarized tag is based on the Alien Higgs-3 IC and has a read distance of up to 12 m. It has an EPC memory of up to 480 bits, a user memory of up to 512 bits, and 64-bit unique TID. It is available in a robust IP68 rated ceramic housing that measures 58.3 x 42.3 x 9.5 mm.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]