PREV 28 Oct, 2020 NEXT

New RF and Microwave Products this Week

28 Oct, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 28 Oct, 2020
 
Sponsored by PCB Directory
 
 
 
New RF and Microwave Products this Week
Antenna/OTA Test System
Antenna Measurement System from 650 MHz to 50 GHz for 5G Test Applications

Antenna/OTA Test System  from Microwave Vision Group

The StarLab 50 GHz from MVG World is an Antenna Measurement System for 5G test applications that provides frequency measurements from 650 MHz to 50 GHz. It's spherical near-field measurement capabilities provide flexibility in types of antennas that can be tested, from low to high directivity. The patented multi-probe electronic scanning technology and oversampling capabilities limit mechanical movement.
Download Datasheet | Product Details
RF Spectrum Analyzer
Portable Monitoring Receiver from 8 kHz to 8 GHz

RF Spectrum Analyzer  from Rohde & Schwarz

The R&S PR200 is a portable monitoring receiver that operates from 8 kHz to 8 GHz. It is an indispensable tool for regulatory authorities, mobile network operators, police forces, military units, and other security organizations. This analyzer reliably detects signals with a duration of 1.5 microseconds, so virtually no signal goes undetected.
Download Datasheet | Product Details
Vector Network Analyzer
2-Port USB Vector Network Analyzer from 100 kHz to 9 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The C1209 is a vector network analyzer that operates from 100 kHz to 9 GHz. It has a dynamic range of 148 dB and can be operated with any Windows PC or laptop. The VNA has a measurement speed of 10 microseconds and can measure up to 500,001 points. It has a wide output power range from -60 dBm to 15 dBm.
Download Datasheet | Product Details
Frequency Multiplier
2x Frequency Multiplier from 12 to 20 GHz

Frequency Multiplier  from Mini Circuits

The ZXF90-2-24-K+ from Mini Circuits is a 2x Frequency Multiplier with an input frequency from 6 to 10 GHz and an output frequency from 12 to 20 GHz. It has a wide input power range from 16 to 22 dBm with a 17 dB conversion loss and good harmonic suppression. This multiplier is available in a rugged 2.92 mm connectorized housing that measures 0.68 x 0.73 x 0.36 inches.
Download Datasheet | Product Details
Frequency Multiplier
6x Active Frequency Multiplier from 75 to 110 GHz

Frequency Multiplier  from AT Microwave

The AT-AM6-75110-08 from AT Microwave is a W-Band 6x Active Frequency Multiplier that upconverts an input frequency from 12.5 - 18.33 GHz to an output RF frequency from 75 - 110 GHz. This multiplier can amplify the input signal to have an output power level of up to 8 dBm. This multiplier requires a DC voltage of 5 V and draws up to 600 mA of current.
Download Datasheet | Product Details
RF Amplifier
L-Band Airborne Amplifiers for IFF and TCAS Applications

RF Amplifier  from Technical Services Laboratory Inc.

The Series 1100 L-Band Airborne Amplifiers from TSL have been developed for Identification Friend-or-Foe (IFF) and for Traffic Collision Avoidance Systems (TCAS). They are designed to operate at 1030 MHz and/or 1090 MHz. The amplifiers provide an output power from 5 to 4000 W, have a duty cycle of 1 - 2% (25% short-term), and a pulse width of up to 35 µs.
Download Datasheet | Product Details
RF Cable
1/2" Plenum RF Coaxial Cable up to 6 GHz

RF Cable  from Times Microwave Systems

The LPA-500-LLPL from Times Microwave Systems is a 1/2” Air-Dielectric Corrugated Plenum Cable that can be used at frequencies up to 6 GHz. It has been designed to offer excellent intermodulation performance and can be used as feedlines within buildings to support distributed antenna systems (DAS). It has a bend radius of more than 5 mm, attenuation of less than 6.23 dB/ft.
Download Datasheet | Product Details
RF Cable
Low Loss Armored Test Cables for Compliance Measurements

RF Cable  from MegaPhase

The EM Series from MegaPhase are Armored Test Cables for EMC applications that operate up to 40 GHz. These low loss, ultra-rugged cables are constructed using materials that meet electromagnetic compatibility testing standards. They provide excellent shielding effectiveness of -120 dBc and the benefits of crush resistant armoring.
Download Datasheet | Product Details
Featured interview
Stephen Douglas - Spirent Communications
Interview with Stephen Douglas from Spirent Communications
everything RF recently interviewed, Stephen Douglas, the Head of 5G Practice at Spirent Communications to learn more about Spirent and their 5G plans, products and services. Stephen works for Spirent’s strategy organization helping to define technical direction, new innovative solutions, and market-leading disruptive technologies. Click here to read the full interview.
 
Front End Module
2x2 MIMO, 2.4 GHz Front End Module for Wi-Fi 6

Front End Module  from NXP Semiconductors

The WLAN8101H from NXP is a 2.4 GHz 2 x 2 MIMO Front End Module that supports WLAN IEEE802.11a/n/ac/ax and Wi-Fi 6. It includes two monolithic front-end ICs. Each IC has an integrated WLAN amplifier, an integrated Bluetooth amplifier, a low noise amplifier with bypass functionality, directional couplers, and an SPDT switch.
Download Datasheet | Product Details
RF Amplifier
1000 W Solid-state, Broadband Amplifier System from 1 to 2.5 GHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 1000S1G2z5B from AR RF/Microwave Instrumentation is a Solid-state, Self-contained, Air-cooled, Broadband Amplifier system that operates from 1 to 2.5 GHz. This amplifier when used with a sweep generator, provides over 1000 W of RF power with a gain of over 60 dB. It is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier.
Download Datasheet | Product Details
RF Shielded Test Enclosure
RF Shielded Test Enclosure from 20 MHz to 6 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-20U60-A1 from RF Electronics is an RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. It has a thick RF absorbing foam that provides an isolation of over 95 dB. The device has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
Download Datasheet | Product Details
Power Divider
4 Way Power Divider from 700 MHz to 6 GHz

Power Divider  from Werlatone Inc

The D11149 from Werlatone is a 4-Way Power Divider that operates from 700 MHz to 6 GHz. This power divider has an insertion loss of 0.6 dB and can handle up to 300 watts of power. It has a phase balance of 5 degrees and an amplitude balance of 0.3 dB. The divider/combiner is available in a module that measures 4.61 x 4.94 x 1.17 inches and has been designed to handle the most stringent environmental conditions.
Download Datasheet | Product Details
RF Cable Assembly
70 GHz Double Row, High-Performance Test Assembly

RF Cable Assembly  from Samtec

The BE70A Series from Samtec is a range of flexible low-loss Microwave Cable Assemblies that operate up to 70 GHz. With a dual-row grid design, they provide up to 16 spring-loaded contacts and are available in stripline or microstrip PCB transmission configuration. These assemblies feature 0.086-inch cables with a bend radius of 8.9 mm.
Download Datasheet | Product Details
RF Amplifier
20 W GaN Solid-State Power Amplifier from 800 MHz to 2500 MHz

RF Amplifier  from NuWaves Engineering

The NW-PA-15D05A from NuWaves is a GaN solid-state power amplifier that operates from 800 MHz to 2500 MHz. It delivers more than 20 watts of RF power with an efficiency of 25% to extend the operational range of data links and transmitters. The PA provides a gain of up to 61 dB and near-constant envelope waveforms. It requires a supply voltage of 27 to 30 V DC and consumes up to 3.6 A of current.
Download Datasheet | Product Details
RF Amplifier
10 W GaN Power Amplifier MMIC from 17 to 20.5 GHz

RF Amplifier  from Arralis

The LE-K1330308-SM from Arralis is a GaN Power Amplifier MMIC that operates from 17 to 20.5 GHz. It provides a saturated output power of more than 10 W with a large signal gain of 20 dB and has a PAE of 25%. This amplifier is fabricated on a space-qualified 0.25 µm GaN-on-SiC process and is integrated with DC blocking capacitors on RF ports.
Download Datasheet | Product Details
RF Amplifier
18 to 40 GHz Low Noise Amplifier for Military & Space Applications

RF Amplifier  from AmpliTech

The APT4-18004000-4008-D20-N from AmpliTech is a Low-Noise Amplifier that operates from 18 to 40 GHz. It provides a P1dB of 9 dBm with a gain of 40 dB and a noise figure of 3 dB. Constructed for MIL-883 and MIL-45208 standards, this amplifier has been designed on a state-of-the-art pHEMT process and has good gain flatness across the band.
Download Datasheet | Product Details
Sponsored by EMC Directory
 
 
 
Cellular Module
Multi-Band System-in-Package for LTE-M / NB-IoT Platforms

Cellular Module  from Skyworks Solutions

The SKY66430-11 is a multi-band multi-chip System-in-Package (SiP) that supports cellular LTE-M/NB-IoT (half-duplex FDD) platforms. The SiP integrates the entire RF front end, transceiver, power management, memory, and baseband modem for an LTE multi-band radio operating in the 700 to 2200 MHz frequency range.
Download Datasheet | Product Details
Band Pass Filter
High Rejection Band Pass Filter from 5150 to 5950 MHz

Band Pass Filter  from Johanson Technology

The 5550BP14D0800 from Johanson Technology is a High Rejection Ceramic Band Pass Filter with a passband from 5150 to 5950 MHz. It can handle up to 3 W of CW power, has an insertion loss of less than 1.0 dB, and a return loss of over 9.5 dB. The filter provides an attenuation of more than 40 dB from 700 to 3800 MHz and more than 20 dB from 7250 to 11700 MHz.
Download Datasheet | Product Details
Block Up Converter
X-Band GaN SSPA BUC 7.9 to 8.4 GHz

Block Up Converter  from Advantech Wireless Technologies

The Pamir-X Line of BUCs from Advantech Wireless are X-Band GaN based SSPA BUCs that up-convert an input frequency from 950 - 1450 MHz to an output frequency from 7.9 - 8.4 GHz with an LO frequency of 6.95 GHz. They are available in multiple output power configurations of 40W / 50W / 60W / 80W / 100W with a gain of 60 dB.
Download Datasheet | Product Details
Phase Noise Analyzer
10 MHz to 6 GHz (Optional to 24 GHz) Real-Time Phase Noise Analyzer

Phase Noise Analyzer  from Holzworth Instrumentation

The HA7062C from Holzworth is a real time fully integrated phase noise analysis system that operates from 10 MHz to 6 GHz. It utilizes a pair of high performance RF Synthesizers as the test signal LOs. The stability of the agile synthesizers operating as LO sources for the high speed, cross-correlation core enables an extremely reliable phase noise analyzer.
Download Datasheet | Product Details
RF Variable Attenuator
Benchtop Assembly with 2 Attenuators from 200 to 8000 MHz

RF Variable Attenuator  from JFW Industries

The 50BA-048-95 from JFW Industries is a Benchtop Attenuator Assembly that operates from 200 to 8000 MHz. It is available with two solid-state step attenuators each providing up to 95 dB of attenuation with 1 dB step size. The attenuators have an insertion loss of less than 8 dB and a switching speed of 4 µs.
Download Datasheet | Product Details
RF Switch
SP3T Reflective Switch from 9.5 to 10 GHz

RF Switch  from Planar Monolithics Industries

The P3T-9R5G10G-55-R-SFF from Planar Monolithics is a Reflective, SP3T Switch that operates from 9.5 to 10 GHz. It has an insertion loss of less than 1.5 dB, isolation of more than 55 dB, and switching speed of under 1 µs. The switch can handle an input power of 7.5 W and requires a supply voltage of +5 / -28 VDC. It is available in a module with SMA female connectors and measures 1.5 x 1.25 x 0.75 inches.
Download Datasheet | Product Details
Diplexer
100 W Quad Diplexer from 1695-1780/2110-2360 MHz

Diplexer  from Microlab

The BK-745EW from Microlab is a Quad Diplexer which allows the combination and separation of signals in the PCS band from 1850 - 1990 MHz with the AWS-WCS bands from 1695 - 1780 MHz and 2110 - 2360 MHz. It has an insertion loss of less than 0.35 dB, provides isolation of over 40 dB, and has a low PIM of -161 dBc.
Download Datasheet | Product Details
Base Station Antenna
Multi-Beam LTE Base-Station Antenna from 1710 to 2690 MHz

Base Station Antenna  from MatSing

The MS-MBA-2 from MatSing is a Base-Station Antenna that operates from 1710 to 2690 MHz. This dual slant ±45° polarized antenna provides a gain of up to 17.8 dBi with a horizontal coverage of 120° and a VSWR of less than 1.5:1. The antenna utilizes a patented spherical lens design with 3 isolated high-frequency cross-polarized beams with each beam having 2 cross-polarized ports for supporting 2x2 MIMO.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]