1. everything RF
  2. RF Newsletters
more
PREV 24 Sept. 2014 NEXT

New RF & Microwave Products this Week

24 Sept. 2014 - everything RF Newsletter
 
everything RF
Date: 24 Sept. 2014
 
Sponsored by Aeroflex / Inmet
 
 
 
New RF & Microwave Products this Week
Omni-Directional Antenna
790 to 2.7 GHz 2x2 MIMO Antenna for 2G/3G/4G Applications (40mm Height)

Omni-Directional Antenna from Huber+Suhner

The SENCITY® Rail antenna supports 2x2 MIMO from 790 MHz to 2.7 GHz. The antenna measures only 40 mm in height making it ideal for double-decker trains or trains normally travelling in tunnels. This omni-directional antenna consists of two broadband radiating elements for 2G/3G/4G/LTE mobile communication in a single compact housing.
 
Download Datasheet | Product Details
 
RF Power Meter
Power Meter for 75 GHz to 3 THz Applications

RF Power Meter from Virginia Diodes, Inc.

The VDI Erickson PM5 Power Meter from Virginia Diodes is a calibrated calorimeter-style power meter for applications with a frequency range from 75 GHz to over 3 THz. It offers power measurement ranges from 1 µW up to 200 mW. The PM5 has a VSWR of 1.15:1 and requires a supply from 90 to 240 V to operate. The sensor head has a WR10 input and VDI sells a variety of input waveguide tapers for use at other frequencies.
 
Download Datasheet | Product Details
 
RF Switch
18 GHz UltraCMOS SP4T Switch with 500 ns Switching Time

RF Switch from Peregrine Semiconductor

The PE42543 is a single-pole four throw (SP4T) RF UltraCMOS switch from Peregrine that operates from 9 KHz to 18 GHz. The UltraCMOS technology enables this RF SOI switch to deliver a high-performance alternative to the incumbent gallium arsenide (GaAs) technology. It has a low insertion loss from 0.7 to 3.2 dB, a P1dB of 33 dBm and a IP3 of 58 dBm.
 
Download Datasheet | Product Details
 
Limiter
PIN Diode Limiter Modules for Automotive, GPS, and Military Applications

Limiter from Skyworks

The SKY16602-632LF is a fully integrated PIN diode low-threshold limiter module that operates from 0.2 GHz to 4 GHz. It is matched to 50 Ohms and has a low insertion loss of 0.5 dB. The device consists of a PIN limiter diode, a Schottky diode, and 2 DC blocking caps at the RF ports in a 2–lead Micro Leadframe Package (MLP).
 
Download Datasheet | Product Details
 
Band Pass Filter
5252 MHz LC Filter for Hi-Rel C Band Applications

Band Pass Filter from Networks International Corporation

This LC Filter from NIC has a center frequency of 5252 MHz with a 600 MHz 1 dB bandwidth. The filter can handle up to 20 dBm of power, has an insertion loss of 3 dB, an attenuation of 40 dBc and is matched to 50 Ohms. This filter offers high performance in a low profile hermetically sealed package. They are designed for use in Hi-Rel C-band applications.
 
Download Datasheet | Product Details
 
Sponsored by Aeroflex / Inmet
Aeroflex - Inmet
Meet the New Magic Number for 2 Watt Temperature Variable Attenuators
Push the limits of frequency without sacrificing performance. Aeroflex/Inmet’s new DC to 12 GHz Powerfilm surface mount attenuators vary with temperature and are the perfect balance of price, power, and dependability.To learn more, download the data sheet.
 
 
 
RF Amplifier
400 W, GaN Linear Power Amplifier from 0.8 to 2.5 GHz

RF Amplifier from Ophir RF

The 5256 from Ophir RF is a linear power GaN Amplifier that operates from 0.8 to 2.5 GHz. It provides a saturated output power of 400 Watts, an IP3 of 60 dBm and a gain of over 56 dB. It can accept CW, AM, FM, PM and Pulse signals. The amplifier requires a single phase AC Voltage of 180 – 264 VAC and is available in a rack mount package with N Type and 7/16 DIN connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
6 to 16 GHz Driver Amplifier for EW and Communications Systems

RF Amplifier from Custom MMIC

The CMD158C4 is a broadband MMIC driver amplifier housed in a leadless 4x4 mm plastic surface mount package. It operates from 6 GHz to 16 GHz with a gain of 21 dB. This amplifier delivers +21 dBm of saturated output power with 24 % PAE from a single 5 V supply. The CMD158C4 is a 50 ohm matched design eliminating the need for external DC blocks and RF port matching. It is ideally suited for EW and communications systems where small size and low power consumption are needed.
 
Download Datasheet | Product Details
 
Power Divider
698 to 2700 MHz 3 Way Power Divider with QMA Connectors

Power Divider from VidaRF

The VPD-0727Q3 is a 3 way power divider that operates from 698 MHz to 2700 MHz. It has an insertion loss of less than 0.9 dB, an isolation of more than 18 dB and can handle up to 30 W of power. The power divider has QMA female connectors that are matched to 50 ohms with a VSWR of less than 1.35:1.
 
Download Datasheet | Product Details
 
Power Divider
698 MHz to 2700 MHz 2 Way Low PIM Power Divider

Power Divider from MECA

The LPU2N-10-1.700VWWP from MECA is a 2 way power divider that operates from 698 MHz to 2700 MHz. The low PIM unequal power divider has a VSWR of 1.25:1, flatness of 1.2 dB and can handle up to 300 W of power. They have N Type female connectors and available in module package.
 
Download Datasheet | Product Details
 
Fixed Attenuator
DC to 65 GHz Fixed Attenuators with 1.85 mm Connectors

Fixed Attenuator from HASCO Components

The HA65A-XX from HASCO Components is a series of 1.85 mm fixed attenuators that operate from DC to 65 GHz. They are matched to 50 Ohms, and are available in attenuation configurations from 3 dB to 30 dB with a VSWR under 1.65:1. The attenuators have passivated stainless steel housing and can operate at temperatures between -55°C to +100°C.
 
Download Datasheet | Product Details
 
Dual Directional Coupler
700 MHz to 4200 MHz Dual-Directional Coupler Handles 2000 W CW Power

Dual Directional Coupler from Werlatone Inc

The C10006 from Werlatone is a 50 dB dual directional coupler that operates from 700 MHz to 4200 MHz and can handle up to 2000 W CW power. It has an insertion loss of 0.2 dB, a directivity of 18 dB and a VSWR of 1.35:1. The coupler is available with various connector options - N Type, SMA, 7/16 DIN, and BNC.
 
Download Datasheet | Product Details
 
Inductor
1 to 51 nH SMD Inductors operate up to 16 GHz

Inductor from Viking Tech America

The WL02(H) Series are SMD wire wound chip inductors with a high Q factor and low profile with outstanding endurance. This series of inductors have an inductance values from 1 to 51 nH and a DC resistance from 0.030 to 0.700 Ohms. They can operate from 2.3 GHz to 16 GHz and measure 1.27 x 0.51 x 0.66 mm. The inductors can be used in broadband, RF products and IT applications.
 
Download Datasheet | Product Details
 
RF Cable Assembly
Discrete, Multi-Conductor Micro Coaxial Cable Assemblies up to 8 GHz

RF Cable Assembly from High Speed Interconnects

This series of Multi-conductor Micro Coaxial Cable Assemblies operate from DC to 8 GHz. They are ideal for avionics, LVDS displays, GPS antennas, and surveillance systems. HSI’s micro coaxial cable solutions are extruded and manufactured to specific requirements using a combination of MHF (IPEX), U.FL (Hirose) and SMA connectors.
 
Download Datasheet | Product Details
 
Software
3D EM Simulation Tool for High Frequency Components

Software from CST – Computer Simulation Technology

CST MICROWAVE STUDIO is a specialist tool for the 3D EM simulation of high frequency components. CST promotes Complete Technology for 3D EM and enables the fast and accurate analysis of high frequency (HF) devices such as antennas, filters, couplers, planar and multi-layer structures and SI and EMC effects. CST MWS quickly gives you an insight into the EM behaviour of your high frequency designs and offers further solver modules for specific applications. It can be embedded in various industry standard workflows through the CST user interface.
 
Download Datasheet | Product Details
 
Spiral Antenna
Ultra-Small Multi-Octave 1-18 GHz Spiral Antenna

Spiral Antenna from Q-par

The QSP-RC-1-18-S-SG-R is a Multi-Octave left and right hand circularly polarised spiral antenna that operates from 1 GHz to 18 GHz. It has a gain of 7 dBiC, a VSWR of less than 2.5:1 and can handle up to 2 W CW of power. The antenna has a diameter of 78mm and is available with SMA jack connectors. It is ideal for challenging applications which includes ELINT & COMINT Systems, Radar Warning Receivers Systems, and Spectrum Management Antenna Arrays.
 
Download Datasheet | Product Details
 
Voltage Controlled Oscillator
1878 MHz to 1879 MHz VCO for SATCOM and Microwave Radio Applications

Voltage Controlled Oscillator from Z-COMM

The CRO1878A-LF from Z-COMM is an ultra-low Phase Noise VCO that operates from 1878 to 1879 MHz. It has a narrow tuning voltage range from 1 to 4 V and a low phase noise of -110 dBc/Hz @ 10 kHz offset. The VCO requires a 5 Vdc supply while drawing 25 mA of current. It is available in a MINI-16-SM packaging and is ideal for SATCOM Systems and Microwave Radio Equipment applications.
 
Download Datasheet | Product Details
 
Transceiver
900 MHz & 2400 MHz – Low Cost, Frequency Agile Digital Data RF Transceiver Module

Transceiver from Linx Technologies

The HumDT from Linx Technologies is a wideband transceiver designed for the reliable wireless transfer of serial digital data. It includes a frequency agile over-the-air protocol and is available in a 902 MHz version and 2483 MHz version. The 900 MHz versions has an output power of up to 10 dBm, resulting in a line-of-sight range of up to 1,600 m (1.0 miles) and the 2.4 GHz version have output power up to 1 dBm, with a 100 m (300 feet) line of sight range.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.