PREV 4 Nov, 2020 NEXT

New RF and Microwave Products this Week

4 Nov, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 4 Nov, 2020
 
Sponsored by Mouser
 
 
 
New RF and Microwave Products this Week
RF Spectrum Analyzer
Dual USB Real-Time Spectrum Analyzer with 245 MHz true I/Q Streaming

RF Spectrum Analyzer  from Aaronia AG

The SPECTRAN V6 X from Aaronia is a high-performance USB real-time spectrum analyzer that operates from 10 MHz to 6 GHz. The analyzer supports dual USB True I/Q streaming up to 245 MHz (IQ rate) real-time bandwidth. Multiple analyzers can be cascaded together to achieve an even higher real-time bandwidth. The analyzers have a DANL of -170 dBm/Hz with an internal pre-amp and an amplitude accuracy of +/- 0.5 dB.
Download Datasheet | Product Details
RF Amplifier
32 W GaN Power Amplifier from 300 to 6000 MHz

RF Amplifier  from Triad RF Systems

The TA1264 from Triad RF Systems is a GaN Power Amplifier that operates from 300 to 6000 MHz. This class AB amplifier uses the latest GaN transistor technology to achieve a linear output power with low distortion, or peak power at high efficiencies to meet any radio system's requirements. It delivers a saturated output power of 32 W with a gain of 45 dB.
Download Datasheet | Product Details
RF Amplifier
25 W GaN Power Amplifier from 0.3 to 2.7 GHz

RF Amplifier  from MACOM

The MAPC-A1000 from MACOM is a Class D Power Amplifier that operates from 0.3 to 2.7 GHz. It provides a saturated output power of 25 W with a small signal gain of 13 dB and supports both CW and pulsed operation. This internally matched amplifier requires 50 V of power supply and is suitable for linear and saturated applications.
Download Datasheet | Product Details
RF Variable Attenuator
8-Bit Digital Attenuator from 960 to 1215 MHz

RF Variable Attenuator  from Technical Services Laboratory Inc.

The 1910-960-1215 from Technical Services Laboratory is an 8-Bit Digital Attenuator that operates from 960 to 1215 MHz. It has been developed for secondary surveillance radar (SSR) and TACAN applications. The attenuator has an attenuation range of 24 dB with a resolution of 0.1 dB and a switching time of 360 ns. It can handle up to 20 dB of CW input power and up to 30 dBm of peak input power.
Download Datasheet | Product Details
RF Connector
32 GHz Optimized Super SMA Connectors

RF Connector  from MegaPhase

The Optimized Super SMA connector from MegaPhase is an SMA connector that operates up to 32 GHz with excellent VSWR performance. These connectors maintain transition ID differences or steps to a minimum to achieve precise VSWR performance at high operating frequencies. They are MIL-STD-346 certified and are suitable for aerospace, satellite, military, and telecommunication applications.
Download Datasheet | Product Details
RF Amplifier
6 W Class-AB Power Amplifier from 2 to 8 GHz

RF Amplifier  from Mini Circuits

The ZVE-6W-83+ from Mini-Circuits is a Four-Stage, Class-AB Wideband Amplifier that operates from 2 to 8 GHz. This unconditionally stable amplifier provides a saturated output power of 6 W with a gain of 33 dB. It has a high IP3 of 40 dBm while supporting a wide range of systems where high performance over wideband is needed.
Download Datasheet | Product Details
RF Switch
Absorptive SPST PIN Diode Switch from 8 to 40 GHz

RF Switch  from Planar Monolithics Industries

The P1T-8G40G-65-T-292FF-1NS-LVPECL from Planar Monolithics Industries is an absorptive, SPST, PIN Diode Switch that operates from 8 to 40 GHz. The switch has an insertion loss of less than 6.8 dB, a typical switching speed of 5 ns and provides an isolation of more than 55 dB. It can handle up to 17 dBm of input power and incorporates a single ended LVPECL compatible driver for easy system integration.
Download Datasheet | Product Details
Sponsored by Mouser
Mouser
RMS Power Detector measures RF signals over a wide 100MHz to 70GHz frequency range
Analog Devices Inc. LTC5597 RMS Power Detector measures RF power independent of input waveforms with different crest factors, such as CW, WCDMA, and OFDM (LTE and Wi-Fi®) signals. Up to 35dB dynamic range is achieved with a very stable output within the full case temperature range. Click Here
 
RF Amplifier
100 W Solid-State Power Amplifier from 6 to 18 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP2033LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 6 to 18 GHz. It delivers 100 W of saturated output power (P1dB of 50 W) with a gain of more than 50 dB. This class A/AB amplifier exhibits 2-tone intermodulation (IMD) of -30 dBc, spurious of -60 dBc, and harmonics of -20 dBc.
Download Datasheet | Product Details
RF Transistor
130 W GaN HEMT from 8.4 to 9.6 GHz for X-Band Radar Applications

RF Transistor  from Wolfspeed, A Cree Company

The CGHV96130F from Wolfspeed is a GaN on SiC HEMT that operates from 8.4 to 9.6 GHz. It provides a saturated output power of up to 130 W with a power gain of over 7.5 dB and has a PAE of 42%. This Internally Matched GaN HEMT requires a DC supply of 40 V. It is available in a metal/ceramic flanged package for optimal electrical and thermal performance.
Download Datasheet | Product Details
RF Amplifier
4 W GaAs Power Amplifier from 9 to 11 GHz

RF Amplifier  from arQana Technologies

The AAA4401-QA from arQana Technologies is a GaAs Power Amplifier that operates from 9 to 11 GHz. It delivers a CW saturated output power of more than 4 W (~36 dBm) with a gain of 23 dB and has a power-added efficiency (PAE) of 25%. The amplifier is available in a surface-mount package that measures 6 x 6 x 1.35 mm.
Download Datasheet | Product Details
RF Variable Attenuator
8x8 Bi-Directional Matrix Attenuator from 500 to 6000 MHz

RF Variable Attenuator  from Vaunix

The VMA-Q8X8SE from Vaunix is an 8x8 Bi-Directional Matrix Attenuator that operates from 500 to 6000 MHz. It provides an attenuation range of 90 dB with a step size of 0.1 dB and has a switching speed of 2 µs. The attenuator has an insertion loss of less than 35.5 dB (including loss of power dividers) and can handle up to 33 dBm of input power.
Download Datasheet | Product Details
Signal Generator
Benchtop Vector Signal Generator from 4 kHz to 3/6/7.125 GHz

Signal Generator  from Rohde & Schwarz

The R&S®SMCV100B from Rohde & Schwarz is a Vector Signal Generator that operates from 4 kHz to 3/6/7.125 GHz. It provides up to +25 dBm of output power, has a modulation bandwidth of up to 240 MHz, and a settling time of 5 ms. The generator has an SSB phase noise of less than -100 dBc (20 kHz offset) at 2.5 GHz and ACLR of -65 dBc at 5 MHz offset.
Download Datasheet | Product Details
Vector Network Analyzer
1-Port USB Vector Network Analyzer from 85 MHz to 14 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The R140 VNA is a 1-port USB powered VNA that operates from 85 MHz to 14 GHz. The VNA is the size of a deck of cards and can be controlled by any Windows PC or laptop. The R140 provides a wide variety of analysis capabilities, including time-domain with gating and DTF measurements.
Download Datasheet | Product Details
RF Amplifier
Low Noise Amplifier from 50 to 4000 MHz

RF Amplifier  from BeRex, Inc.

The BL083 from Berex is a Low Noise Amplifier that operates from 50 to 4000 MHz. It provides a gain of 15.6 dB with a noise figure of 0.98 dB and a P1dB of 17.7 dBm. The LNA is fabricated on a GaAs e-pHEMT process and can be used in applications where low noise and high linearity are required. It requires a DC supply of 3 V and draws 50 mA of current.
Download Datasheet | Product Details
Sponsored by Mouser
 
 
 
RF Switch
4-Port Absorptive Switch Matrix from 10 to 6000 MHz

RF Switch  from DS Instruments

The SW6000 from DS Instruments is a 4-Port Absorptive Switch Matrix that operates from 10 to 6000 MHz. It has an insertion loss of less than 2.5 dB, provides isolation of more than 42 dB, and can handle an input power of up to 33 dBm (2 W). This bi-directional switch matrix can be controlled manually or via USB and has a switching speed of 25 uS.
Download Datasheet | Product Details
GNSS OEM Board
Multi-Band GNSS OEM Board for Monitoring and Surveying Applications

GNSS OEM Board  from Unicore Communications

The UB4B0 is a Multi-Band High Precision GNSS OEM Board from Unicore Communications. It supports triple-frequency Real Time Kinematics (RTK) technology for geodetic surveying engineering survey, deformation monitoring, mechanical control, meteorological monitoring, precision agriculture, and continuous operation reference station (CORS) applications.
Download Datasheet | Product Details
GNSS Module
Low Power GNSS Module for Portable Devices & Tracking

GNSS Module  from GNS Electronics GmbH

The GNS7040 from GNS Electronics is a GNSS Module that supports GPS, GLONASS, QZSS, and BeiDou constellations. This low-power module integrates a complete GNSS receiver enabling RF to NMEA solutions that minimize the load on the host processor. It has a TTFF Cold start of 30 s, and a TTFF Hot start of 1 s. This module has a GNSS tracking sensitivity of -161 dBm and an acquisition sensitivity of -146 dBm.
Download Datasheet | Product Details
RF Module
802.11 b/g/n Wi-Fi Module for Industrial IoT Applications

RF Module  from Microchip Technology

The WFI32E01PC from Microchip Technology is a 2.4 GHz 802.11 b/g/n Wi-Fi Module for Industrial IoT applications. It has an integrated PIC32MZW1 MCU, and an RF Transceiver that supports a power amplifier, low noise amplifier, and Tx/Rx switch interfacing. The MCU has 1MB embedded flash and 256 KB SRAM.
Download Datasheet | Product Details
Wireless SoC
2x2 Dual-Band Wi-Fi / Bluetooth 5.0 SoC with MU-MIMO and Tx Beamforming

Wireless SoC  from Qualcomm

The QCA9379 from Qualcomm is a 2x2 Dual-Band Wi-Fi (802.11a/b/g/n/ac) / Bluetooth 5.0 SoC with MU-MIMO and Tx Beamforming capabilities in a single-chip. It supports enhanced Wi-Fi/Bluetooth co-existence for IoT applications with a dedicated antenna for Bluetooth transmission. It requires a DC supply of 3.3 V and supports WLAN, PCIe, SDIO, PCM, HS-UART, and USB interfaces.
Download Datasheet | Product Details
RF Module
Dual Mode Bluetooth 5.0 Module

RF Module  from Fujitsu

The FWM7BTZ61 from Fujitsu is a Dual Mode Bluetooth 5.0 Module which is compatible with both Bluetooth low energy and Bluetooth classic BR/EDR modes. The symbol rate and data rate accommodate both 1 Mbps and improved 2 Mbps to facilitate communication speeds with other Bluetooth Low Energy devices. It requires a DC voltage from 1.71 to 3.63 V.
Download Datasheet | Product Details
RF Module
Integrated Bluetooth 5.0 Module

RF Module  from Cypress Semiconductor

The CYBT-333032-02 from Cypress is an Integrated Bluetooth 5.0 Smart Module. It uses a Cypress CYW20706 SoC which is based on the ARM Cortex-M3 32-bit processor, a 512 kB serial flash memory, and an onboard crystal oscillator. The module has an integrated power amplifier and transmits up to 12 dBm of power in Bluetooth classic mode and up to 9 dBm of power in low energy mode with a range of up to 250 m.
Download Datasheet | Product Details
Antenna
Omni-directional Concealment Antenna for 4G-LTE Cellular Applications

Antenna  from Southwest Antennas

The 1066-055 from Southwest Antennas is an Omni-directional Concealment Antenna for 4G-LTE Cellular applications from 698 - 960 MHz and 1,710 - 3,000 MHz. It has been designed for use in covert surveillance operations, antenna concealment devices, or any application where discreet antenna placement is needed. The antenna provides a gain of 2.2 dBi, can handle 1 W of power, and has a VSWR of 2:1.
Download Datasheet | Product Details
Antenna
Railway Rooftop Antenna for Cellular, WiFi and GNSS Applications

Antenna  from Huber+Suhner

The 1399.99.0152 from Huber+Suhner is a Railway rooftop antenna for Cellular, WiFi and GNSS. The antenna supports 2x2 Cellular MIMO for 3G, 4G and 5G. It also supports 2x2 WiFi MIMO in all Wi-Fi 6E bands and has an active GNSS antenna that supports GPS L1+L2+L5, Galileo E1+E5a+E5b, BeiDou B1+B2+B3, and GLONASS G1+G2 bands.
Download Datasheet | Product Details
Fixed Attenuator
Low PIM Fixed Attenuator from 698 MHz to 2.7 GHz

Fixed Attenuator  from MECA

The LPA50-6-1WWP from MECA is a Low PIM Fixed Attenuator that operates from 698 MHz to 2.7 GHz. It is available in multiple attenuation configurations from 6 to 30 dB with an accuracy of ±1.5 dB. This RoHS- compliant attenuator can handle 50 W of average power, 1500 W of peak power and has a VSWR of 1.35:1.
Download Datasheet | Product Details
RFID Tag
RFID Garment Tag from 840 to 960 MHz

RFID Tag  from Alien Technology

The ALN-9828-W from Alien Technology is an RFID Garment Tag that operates from 840 to 960 MHz. It is based on Alien Higgs™-EC IC and is designed to fit into densely packed retail products on shelves and hangars. The tag has an EPC memory of 128-bits, user memory of 128-bits, TID of 32-bits, unique TID of 48-bits, access password of 32-bits, and a kill password of 32-bits.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new products, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]