PREV 11 Nov, 2020 NEXT

New RF and Microwave Products this Week

11 Nov, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 11 Nov, 2020
 
Sponsored by Digi-Key
 
 
 
New RF and Microwave Products this Week
RF Amplifier
20 W Microwave Amplifier System from 2 GHz to 20 GHz

RF Amplifier  from Rohde & Schwarz

The SAM100 from Rohde & Schwarz is an Ultra-wideband Microwave Amplifier System that operates from 2 GHz to 20 GHz. It delivers 20 W of output power with a high gain of 47 dB and has a noise figure of less than 8.0 dB. The amplifier can be manually or remotely operated via a digital control interface. The digital control interface makes it suitable for integration in automatic test systems.
Download Datasheet | Product Details
Rubidium Oscillator
10 MHz Ultra-Portable High Precision & Performance Rubidium Oscillator

Rubidium Oscillator  from Orolia

The Spectratime mRO-50 from Orolia is a 10 MHz Low SWaP-C Miniaturized Rubidium Oscillator that has been designed to meet the latest commercial, military, and aerospace requirements where time stability and power consumption are critical. The clock design is based on the proven rubidium clock heritage at Orolia and it has been adapted for low power (0.36 W @ 3.3V) and size.
Download Datasheet | Product Details
RF Switch
SP4T Digital MEMS Switch from DC to 12 GHz

RF Switch  from Menlo Micro

The Menlo Micro MM5120 is the world’s first generally available high-power RF SP4T MEMS switch that operates from DC to 12 GHz. Menlo Micro has developed a new fabrication process and applied it to DC and wideband RF/microwave switch applications. This new innovative technology enables robust and highly reliable switches that can handle up to 25 W CW and 150 W pulsed power.
Download Datasheet | Product Details
Signal Generator
Thumb Drive Sized RF Signal Generator from 12.5 MHz to 6.4 GHz

Signal Generator  from Windfreak Technologies

The SynthUSB3 from Windfreak Technologies is a thumb drive sized RF Signal Generator that operates from 12.5 MHz to 6.4 GHz. It provides an output power of up to 8 dBm with an amplitude resolution of 0.2 dB. This USB powered generator has a phase noise of -115 dBc/Hz at 1 GHz@10 kHz offset and supports FM, AM, and pulse modulation techniques.
Download Datasheet | Product Details
RF Amplifier
5 kW GaN Solid State Transmitter from 5.6 to 5.7 GHz

RF Amplifier  from RFHIC

The RRT56575K0-67 from RFHIC is a GaN Solid State Transmitter that operates from 5.6 to 5.7 GHz. It is designed using GaN on SiC HEMT transistors and is ideal for high power radar applications. The transmitter provides an output pulse power of 5 kW and has a gain of 67 dB. It has a pulse width of 100 us and a duty cycle of 10%.
Download Datasheet | Product Details
RF & Microwave Circulator
Surface Mount RF Circulator from 3400 to 3600 MHz

RF & Microwave Circulator  from TDK

The CU4S0508AC-3600-00 from TDK Corporation is a Circulator that operates from 3400 to 3600 MHz. It has an insertion loss of less than 1.3 dB, isolation of over 9 dB, and can handle up to 5 watts of power. This circulator has a clockwise direction of circulation and has a VSWR of 2:1. It is available in a surface-mount package that measures 5.2 (L) x 5 (W) x 2.5 (T) mm.
Download Datasheet | Product Details
Sponsored by Digi-Key
Digikey
Amphenol SV Microwave new SuperFlex RF cable assemblies
Amphenol SV Microwave now offers fixed length RF cable assemblies using its most flexible Ø.047 cable yet! This super flexible coax cable is capable of extreme bends (inside bend radius of .0625”) which allow it to fit in tight spaces for any application. Click here to learn more.
 
RF Spectrum Recording and Playback System
Portable Spectrum Recording System from 9 kHz to 8/18 GHz

RF Spectrum Recording and Playback System  from CRFS

The RFeye® SenS Portable is a lightweight, portable I/Q recorder for high-fidelity, long-duration RF recording and signal extraction from 9 kHz to 8/18 GHz. This recorder has 100 MHz of real time bandwidth and can store up to 12 hours of spectrum recordings in its internal 25.6 TB SSD. The DeepView software interface from CRFS allows users to quickly find and extract the required signals.
Download Datasheet | Product Details
RF Amplifier
2500 W Solid-State Amplifier from 10 kHz to 225 MHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 2500A225B from AR RF/Microwave Instrumentation is a Solid-State Amplifier that operates from 10 kHz to 225 MHz. This self-contained, air-cooled amplifier, when used with a sweep generator, delivers more than 2500 W of output power with a gain of over 64 dB. It has a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. This amplifier can be used for a wide range of applications including EMC Testing.
Download Datasheet | Product Details
Power Divider
3 Way Power Divider from 2 to 5.12 GHz

Power Divider  from American Microwave Corporation

The PDV-3W01 from American Microwave Corporation is a 3-Way Power Divider that operates from 2 to 5.12 GHz. It has an insertion loss of less than 0.8 dB, provides isolation of over 16 dB, and can handle an average power of up to 4 watts. It has a phase imbalance of 5 degrees and an amplitude imbalance of 0.6 dB. When used as a combiner this device can handle up to 4 watts of power at each port.
Download Datasheet | Product Details
RF Amplifier
L & S-Band Bidirectional Amplifier from 1 to 2.5 GHz

RF Amplifier  from NuWaves Engineering

The NW-BA-12B04A-D27 from NuWaves is an L & S-Band Bidirectional Amplifier that operates from 1 to 2.5 GHz. This amplifier is ideal for extending the communication range of half-duplex S-band transceivers that are running constant-envelope or near-constant-envelope waveforms. The amplifier requires a DC supply of 28 V and consumes 2.5 A of current.
Download Datasheet | Product Details
RF Module
Sub-GHz Low Power LoRa Module

RF Module  from Microchip Technology

The WLR089U0 from Microchip is an Ultra-Low Power, LoRa module that operates from 863 to 928 MHz. This module combines the ATSAMR34J18B SiP (System-in-Package), 32.768 kHz crystal, 32 MHz TCXO, RF switch, lumped element harmonics rejection filter, impedance matching circuits, Low Pass Filter (LPF), and required RF shielding in a compact 17 mm x 13.5 mm design.
Download Datasheet | Product Details
RF Module
Wi-Fi (2.4/5 GHz) + Bluetooth (v5) Combo Module

RF Module  from California Eastern Laboratories

The CMP9377 from CEL is a Dual-Band Single Stream Wi-Fi (2.4/5 GHz) + Bluetooth (v5) Combo Module that is optimized to extend the battery life of portable wireless devices. Based on Qualcomm’s QCA9377 chipset, this multiprotocol module provides the optimal combination of high performance and low power connectivity.
Download Datasheet | Product Details
Sponsored by Digi-key
Digi-key
High Performance 2.92mm Right Angle Cable Assemblies
SV Microwave’s newest mmWave addition gives you true 40GHz performance for right angle 2.92mm cable connectors. No need to sacrifice performance for space or change in interface. Click here to learn more.
 
Down Converter
50 GHz Heterodyne Downconversion System for Phase Noise Measurements

Down Converter  from Holzworth Instrumentation

The HA7063A from Holzworth is a Heterodyne Downconversion System that can accept an input RF signal from 10 MHz to 50 GHz. This system has been designed to seamlessly integrate with Holzworth's HA7062 series real-time phase noise analysis products as an ANSI z540 calibrated frequency extension. It downconverts the signal to DC to 40 MHz (with HA7062C) and DC to 100 MHz (with HA7062D).
Download Datasheet | Product Details
General Crystal Oscillator
Continuous Voltage Crystal Oscillators from 1.25 to 100 MHz

General Crystal Oscillator  from Abracon LLC

The ASADV from Abracon is a series of Continuous Voltage Crystal Oscillators that operate from 1.25 to 100 MHz. They are offered in standard LVCMOS/CMOS/HCMOS versions, with a continuous operating voltage from 1.6 V to 3.6 V. The series has an RMS phase jitter of less than 1 ps and an RMS period jitter of 7 ps. They have a startup time of less than 10 ms and a rise/fall time of 6 ns.
Download Datasheet | Product Details
TCXO
Clipped Sinewave TCXO from 8 to 40 MHz

TCXO  from Fox Electronics

The T5HN from Fox Electronics is a TCXO that operates from 8 to 40 MHz. This TCXO requires a 3.3 V supply voltage and provides a Clipped Sine output waveform with a pulling range of 3 to 20 PPM. It has a frequency stability of ±0.3 ppm while operating over a temperature range from -40°C to 85°C. This REACH and RoHS-compliant TCXO is available in a compact package that measures 5.00 x 3.20mm.
Download Datasheet | Product Details
Antenna/OTA Test System
mm-Wave Mini-Chamber for OTA Measurements

Antenna/OTA Test System  from Milliwave Silicon Solutions

The MBX04 from Milliwave Silicon Solutions is a mmWave Mini Chamber that operates 18 to 95 GHz. It has been designed to fit on an 8-foot lab bench and measures 8 x 3 x 2 feet. This mmWave mini-chamber is suitable for 198 cm far-field measurements with applications such as radar, 5G (NR) mmWave, 802.11ad, 802.11ay, and other proprietary mmWave solutions from 18 GHz to 95 GHz.
Download Datasheet | Product Details
RF Amplifier
Ka-Band GaN Power Amplifier from 34 to 36 GHz

RF Amplifier  from QuinStar Technology Inc

The QBP-35025055 from Quinstar Technology is a Ka-Band GaN Power Amplifier that operates from 34 and 36 GHz. It provides a saturated output power of 50 dBm with a gain of 55 dB. This solid-state amplifier requires a DC Supply between 28V to 48V and has a current consumption from 14 to 25 A. It is available in a module that measures 14 x 7.1 x 3 inches (excluding the DC connector).
Download Datasheet | Product Details
RF Amplifier
Low Noise Amplifier from 1 to 18 GHz

RF Amplifier  from AmpliTech

The AWLN-35-01001800-1520-D4 from AmpliTech is a Low Noise Amplifier that operates from 1 to 18 GHz. It provides a gain of more than 35 dB (±2.5 dB gain flatness) with a noise figure of 1.3 dB and has a P1dB of +20 dBm. The amplifier can handle up to +13 dBm of CW input power and has a VSWR of 2.5:1. It has been developed using state-of-the-art pHEMT technology to provide quality and performance.
Download Datasheet | Product Details
GNSS Module
High-Precision Positioning and Heading GNSS Receiver Module

GNSS Module  from Septentrio

The mosaic-H from Septentrio is a High-Precision Positioning and Heading GNSS Receiver Module. It has a dual antenna design that provides unmatched automation and navigation performance in both static and dynamic states. The module supports American GPS, European Galileo, Russian GLONASS, Chinese BeiDou, Japan’s QZSS, and India’s NavIC satellite constellations.
Download Datasheet | Product Details
GNSS Module
Low Power GNSS Receiver Module for Wearables and Asset Tracking Devices

GNSS Module  from u-blox AG

The MAX-M10S from u-blox is an L1-Band GNSS Receiver that is designed for battery-powered asset tracking devices. It supports concurrent reception of four GNSS constellations - GPS, GLONASS, Galileo, and BeiDou and provides exceptional sensitivity and acquisition time. The receiver has a TTFF cold start of less than 24 s and a TTFF hot start under 1 s. It has a tracking sensitivity of -167 dBm and a reacquisition sensitivity of -161 dBm.
Download Datasheet | Product Details
GPS/GNSS Antenna
Active Multi-Band GNSS Antenna for High Precision Applications

GPS/GNSS Antenna  from Taoglas

The Colosseum X XAHP.50 from Taoglas is an Active Multi-Band GNSS External Antenna developed for applications that require critical high-accuracy positioning and timing information. This RHCP antenna delivers a gain of over 28 dB and has a noise figure of less than 2.6 dB. It requires a DC supply from 1.8-5V and has a current consumption of less than 20 mA.
Download Datasheet | Product Details
Microwave Backhaul Radio Links
15.2 Gbps Microwave Backhaul Radio Link from 57 to 66 GHz

Microwave Backhaul Radio Links  from Cambium Networks

The V5000 from Cambium Networks is a Microwave Backhaul Radio Link that operates from 57 to 66 GHz. It is integrated with a dual-sector antenna that delivers a gain of over 22.5 dBi and has a covering angle of up to 280 degrees with beamforming. This backhaul radio has a data rate of up to 15.2 Gbps (7.6 Gbps for both UL and DL) with channel bonding and has an EIRP (Equivalent Isotropically Radiated Power) of 38 dBm.
Download Datasheet | Product Details
RF Shielded Test Enclosure
RF Shielded Test Enclosure from 20 MHz to 6 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-2460 from RF Electronics is an RF Shield Box that operates from 20 MHz to 6 GHz and is designed for WLAN and wireless device testing. The rugged enclosure has thick RF absorbing foam that deadens standing waves and reflections. The shield box provides an isolation of more than 90 dB and is equipped with shielded power filters for powering devices in the box while still blocking all wireless signals.
Download Datasheet | Product Details
RF & Microwave Circulator
Surface Mount X-Band Circulator from 9.2 to 10.8 GHz

RF & Microwave Circulator  from Renaissance Electronics Corporation

The 3SMH8NAKL from Renaissance is an X-Band Circulator that operates from 9.2 to 10.8 GHz. It can handle up to 25 W of peak power and 5 W of average power. The circulator has an insertion loss of less than 0.6 dB and provides isolation of 18 dB. It is available in a surface-mount package that measures 0.350 x 0.350 x 0.191 inches.
Download Datasheet | Product Details
RF Switch
Reflective SP4T Switch from DC to 20 GHz

RF Switch  from Atlanta Micro

The AM6013 from Atlanta Micro is a Reflective SP4T Switch that operates from DC to 20 GHz. It has an insertion loss of less than 1.3 dB and provides isolation of more than 30 dB. The switch has an Input IP3 of 42 dBm and requires a DC Supply from 3.3 to 5V. It is matched to 50 ohms and is available in a low SWaP (size, weight, and power) footprint.
Download Datasheet | Product Details
RF Amplifier
Hermetically Sealed Low Noise Amplifier from 6 to 18 GHz

RF Amplifier  from RF-Lambda

The RLNA06G18G45D-H from RF-Lambda is a Low Noise Amplifier that operates from 6 to 18 GHz. It provides a gain of more than 50 dB with a noise figure of less than 1.5 dB and has a saturated output power of 17 dBm. The amplifier requires a DC supply of 15 V and consumes up to 200 mA of current. It is available in a hermetically sealed coaxial drop-in package with SMA Female connectors.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, webinars and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]