PREV 20 Jan, 2021 NEXT

New RF and Microwave Products this Week

20 Jan, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 20 Jan, 2021
 
Sponsored by Digi-Key
 
 
 
New RF and Microwave Products this Week
Vector Network Analyzer
Two-Port Handheld Vector Network Analyzers from 30 kHz to 26.5 GHz

Vector Network Analyzer  from Rohde & Schwarz

The R&S ZNH Series from Rohde & Schwarz are two-port handheld Vector Network Analyzers (R&S®ZNH4, R&S®ZNH8, R&S®ZNH18, R&S®ZNH26) that operate from 30 kHz to 4/8/18/26.5 GHz. The VNAs are available with cable and antenna analysis and full S-parameter measurement capability. They are user-friendly, easy to configure, and have a compact fanless housing for field applications.
Download Datasheet | Product Details
RF Repeaters
28 GHz 5G Repeater Based on Holographic Beam Forming Technology

RF Repeaters  from Pivotal Commware

The Echo 5G 28 GHz Repeater from Pivotal is the world’s first and only on-glass Beamforming Repeater that operates from 27.5 to 28.35 GHz. It is designed to counteract signal loss caused by glass windows at millimeter wave frequencies. The Echo 5G uses Pivotal’s patented Holographic Beam Forming (HBF) to provide Gigabit speeds beyond the reach of cable and DSL.
Download Datasheet | Product Details
Software
Radar Simulation Software

Software  from Remcom

WaveFarer® is a high fidelity radar simulator that accounts for multipath and scattering from structures and vehicles in the immediate environment of a radar system as well as key atmospheric and scattering effects for frequencies up to and beyond 100 GHz. Applications include simulation of automotive drive scenarios, indoor sensors, and far-field radar cross-section (RCS).
Download Datasheet | Product Details
Wireless SoC
6 GHz Tri-Band 4x4 Wi-Fi 6E (802.11ax) SoC for Access Points

Wireless SoC  from NXP Semiconductors

The CW641 from NXP Semiconductors is a 6 GHz Tri-Band 4x4 Wi-Fi 6E (802.11ax) solution designed for access points and service provider gateways. It supports 20/40/80/160 MHz channel bandwidths and provides a peak data rate of 4.8 Gbits/s. By combining NXP’s full MU-MIMO and OFDMA solutions, it increases wireless network capacity to meet the growing demands of user applications.
Download Datasheet | Product Details
Wireless SoC
Wi-Fi 6E SoC for Access Points and Extenders

Wireless SoC  from MaxLinear, Inc

The WAV664 from MaxLinear is a Wi-Fi 6E SoC that offers fast and consistent connectivity in the 6 GHz band. The SoC delivers speeds up to 4.8 Gbps in the 6 GHz band enabling routers and gateways to deliver multi-gigabit Wi-Fi speeds and provide higher-quality user experiences for applications in Ultra HD, 4K and 8K video streaming especially in dense environments.
Download Datasheet | Product Details
RF Amplifier
2 W Distributed GaN Amplifier from 2 to 18 GHz

RF Amplifier  from Altum RF

The ARF1306C5 from Altum RF is a Distributed Amplifier that operates from 2 to 18 GHz. It delivers a saturated output power of 34 dBm with a small-signal gain of 15 dB. This GaN amplifier requires a bias voltage of 20 V and draws 450 mA of current. It is pre-matched to 50 ohms and the RF ports are AC coupled. The ARF1306C5 is housed in an air-cavity ceramic QFN package that measures 5 x 5 mm.
Download Datasheet | Product Details
Frequency and Time Standard
Low-Cost High-Performance GPS/GNSS Rubidium Reference Source

Frequency and Time Standard  from Orolia

The Spectratime GNSSource-2500 from Orolia is a low-cost, high-performance GPS/GNSS primary rubidium reference source with 8 x 10 MHz / 8 x 1PPS or 16 x 10 MHz output frequency options. It is designed for cross-industry applications, where high stability and timekeeping features are required. This unit integrates a smart, low-noise Rubidium LNRClok-1500 and a GPS/GNSS receiver.
Download Datasheet | Product Details
Sponsored by Digi-Key
SuperFlex RF cable assemblies
Amphenol SV Microwave new SuperFlex RF cable assemblies
Amphenol SV Microwave now offers fixed length RF cable assemblies using its most flexible Ø.047 cable yet! This super flexible coax cable is capable of extreme bends (inside bend radius of .0625”) which allow it to fit in tight spaces for any application. Click here to learn more.
 
RF Amplifier
1200 W Solid-State Power Amplifier from 10 kHz to 225 MHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 1200A225A AR RF/Microwave Instrumentation is a Solid-State Power Amplifier that operates from 10 kHz to 225 MHz. This self-contained, air-cooled amplifier, when used with an RF sweep generator, provides more than 1200 W of CW power with a gain of over 61.8 dB. It has a noise figure of 7 dB, spurious levels of -70 dBc and harmonic distortion of up to -20 dBc.
Download Datasheet | Product Details
RF Amplifier
750 W Solid-State High-Power Amplifier from 80 to 1000 MHz

RF Amplifier  from Exodus Advanced Communications

The AMP2071A-LC from Exodus Advanced Communications is a solid-state high-power amplifier that operates from 80 to 1000 MHz. This class A/AB linear amplifier provides over 750 Watts of saturated power (600 W P1dB) with a power gain of over 60 dB. This LDMOS amplifier has built-in protection circuits and is suitable for all single channel modulation standards.
Download Datasheet | Product Details
Power Divider
6-Way Power Divider from 2 to 5 GHz

Power Divider  from American Microwave Corporation

The PDV-6W01 from American Microwave Corporation is a 6-Way Power Divider that operates from 2 to 5 GHz. It can handle an average power of up to 1 W, has an insertion loss of less than 2 dB and provides isolation of over 16 dB. The power divider has a phase imbalance of 5 degrees and an amplitude imbalance of 0.6 dB. When used as a combiner this device can handle up to 4 W of power at each port.
Download Datasheet | Product Details
OCXO
Ultra-Low Power Miniature OCXO from 8 to 100 MHz

OCXO  from Dynamic Engineers

The OCXO3320AW from Dynamic Engineers is an Ultra-Low Power Miniature Low Profile OCXO that operates from 8 to 100 MHz. It has a phase noise of -163 dBc/Hz @100 kHz, and frequency stability of ±5 ppb over a temperature range from -40°C to +85°C. This OCXO provides HCMOS (TTL) or Sinewave outputs while operating over a 5V supply voltage.
Download Datasheet | Product Details
VCXO
Space Qualified VCXO from 0.256 to 52.5 MHz

VCXO  from Rakon

The RXO2213S from Rakon is a space-grade VCXO that operates from 0.256 to 52.5 MHz. This VCXO has an extremely high pulling ability of ±375 ppm. It is manufactured in accordance with MIL-PRL-55310 Class 2, level S, and is designed to meet the space missions where it is resistant to the demanding environment, short lead-time and radiation tolerance requirements are important.
Download Datasheet | Product Details
RF Cable Assembly
70 GHz Cable Assembly for Lab, High-speed Digital, and Production Testing Applications

RF Cable Assembly  from Huber+Suhner

The SUCOFLEX 570S from HUBNER+SUHNER are RF Cable Assemblies that operates up to 70 GHz. These assemblies provide a precise, long-lasting connectivity solution that ensures extremely accurate measurements even under the most severe operating conditions. They have outstanding phase and amplitude stability with flexure and movement.
Download Datasheet | Product Details
RF Cable Assembly
2.92 mm Male RF Cable Assembly from DC to 40 GHz

RF Cable Assembly  from Taiwan Rapidtek Inc.

The 38MS-38MS30344 from Taiwan Rapidtek Inc. is an RF Cable Assembly that operates from DC to 40 GHz. It has an insertion loss of less than 1.63 dB and a VSWR of under 1.3:1. The cable assembly has phase stability of 3 degrees, amplitude stability of 0.1 dB, and a velocity propagation of 76 %. It has a length close to 12 inches, a bend radius of 65 mm and is available with 2.92 mm Male connectors on both sides.
Download Datasheet | Product Details
Sponsored by Digi-Key
Cable Assemblies
High Performance 2.92mm Right Angle Cable Assemblies
SV Microwave’s newest mmWave addition gives you true 40GHz performance for right angle 2.92mm cable connectors. No need to sacrifice performance for space or change in interface. Click here to learn more.
 
RF Amplifier
8 W GaN on SiC Power Amplifier from 2.49 to 2.69 GHz

RF Amplifier  from Wolfspeed, A Cree Company

The WS1A2639-V1 from Wolfspeed is an Asymmetric Doherty Power Amplifier Module (PAM) that operates from 2.496 to 2.690 GHz. This amplifier is fabricated using GaN on SiC technology with advanced matching and biasing networks on a multilayer laminate substrate with advanced heat sinking technology. The amplifier provides a small signal gain of 16.5 dB and has an efficiency of up to 57%. It has been developed for use in multi-standard cellular power amplifiers.
Download Datasheet | Product Details
RF Amplifier
28 dB Low-Noise Amplifier from 5.4 to 5.9 GHz

RF Amplifier  from AmpliTech

The APT3-05400590-1010-LS-D4-FAC from AmpliTech is a Low-Noise Amplifier that operates from 5.4 to 5.9 GHz. It provides a gain of more than 28 dB, has a noise figure of less than 1 dB and a P1dB of over 10 dBm. An internal limiter provides protection against up to 2 W CW RF input power over the full band. It offers reverse voltage protection and requires a DC supply voltage from 5 to 15 V.
Download Datasheet | Product Details
RF Variable Attenuator
20 dB Voltage Variable Attenuator from 6 to 12 GHz

RF Variable Attenuator  from Mini Circuits

The ZX73-123+ from Mini-Circuits is a Voltage Variable Attenuator that operates from 6 to 12 GHz. It provides adjustable attenuation from 0 to 20 dB with an insertion loss of less than 1.6 dB and a typical return loss of 15 dB. The attenuator operates on a single positive voltage without needing an extra supply voltage. It is available in a module that measures 30.48 x 25.40 x 9.65 mm and has SMA connectors.
Download Datasheet | Product Details
RF Amplifier
150 W Armored Solid-State High Power Amplifier from 1 to 2 GHz

RF Amplifier  from Empower RF

The 2224 from Empower RF is a Solid-State High Power Amplifier that operates from 1 to 2 GHz. It delivers a CW output power of 150 W with a small signal gain of more than 56 dB and is suitable for CW/FM modulation standards. This class AB amplifier system utilizes GaN on SiC power devices that provide a wide dynamic range, low distortions, and good linearity.
Download Datasheet | Product Details
Voltage Controlled Oscillator
Quadband GaAs MMIC VCO from 9.85 to 20.5 GHz

Voltage Controlled Oscillator  from Analog Devices

The ADF5709 from Analog Devices is a wideband MMIC Voltage Controlled Oscillator that operates from 9.85 to 20.5 GHz. The VCO is fully integrated and incorporates a resonator, a negative resistance device, and a varactor diode that minimize the number of external components and reduces board space. It exhibits a phase noise of -83 dBc/Hz at 100 kHz offset without subharmonic tones.
Download Datasheet | Product Details
Cellular Module
LTE/HSPA+/GSM Cellular Module for Wearables and Automotive Applications

Cellular Module  from u-blox AG

The TOBY-L200 from u-blox AG is an LTE/HSPA+/GSM Cellular Module that supports LTE (Cat 4) bands such as B2, B4, B5, B7, and B17. It has an uplink data rate of 50 Mbit/s and a downlink data rate of 150 Mbit/s. The module supports 2x2 MIMO technology and GSM Quad-band operation. It requires a DC supply of 3.4-4.5 V and can be controlled via UART, USB, DDC, SDIO, and GPIO interfaces.
Download Datasheet | Product Details
Directional Coupler
16 dB Directional Coupler from 2 to 40 GHz

Directional Coupler  from VidaRF

The VDC-20400A16 from VidaRF is a broadband directional coupler that operates from 2 to 40 GHz. It provides coupling value of 16 dB with directivity of over 12 dB and an insertion loss of less than 1.8 dB. The coupler can handle up to 20 watts of input power and is available in a module with 2.92 mm female connectors.
Download Datasheet | Product Details
DC Block
Inner DC Block from 250 kHz to 40 GHz

DC Block  from MECA

The 500-1K from MECA is an Inner DC Block that operates from 250 kHz to 40 GHz. The DC block provides an insertion loss of less than 1.25 dB and an Input/Output VSWR of up to 1.65:1. This connectorized DC Block has 2.92 mm M/F connectors with a breakdown voltage of 75 V and can handle up to 10 Watts of average power.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]