1. everything RF
  2. RF Newsletters
more
PREV 27 Jan, 2021 NEXT

New RF and Microwave Products this Week

27 Jan, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 27 Jan, 2021
 
Sponsored by Rohde & Schwarz
 
 
 
New RF and Microwave Products this Week
RF Amplifier
Quad-Channel Differential Variable Gain Amplifier from 1300 to 2800 MHz

RF Amplifier  from Renesas

The F4482 from Renesas is a Quad Path Tx Differential Variable Gain Amplifier (DVGA) that operates from 1300 to 2800 MHz. This amplifier has been developed for Macro Base Stations. It provides four independent transmit paths, each with a gain of up to 27.5 dB, an output P1dB of +16.5dBm, and a noise figure of 5.7dB.
Download Datasheet | Product Details
Power Sensor
Three-Path RF Power Sensor from 50 MHz to 67 GHz

Power Sensor  from Rohde & Schwarz

The R&S NRP67S/SN from Rohde & Schwarz is a Power Sensor that operates from 50 MHz to 67 GHz. It has a dynamic range from -70 dBm to 20 dB and a measurement rate of 10,000 measurements per second. The power sensor uses a three-path technology which enables extremely fast and accurate measurements with high-sensitivity.
Download Datasheet | Product Details
Directional Coupler
Precision Directional Coupler from 20 to 110 GHz with W1 Connectors

Directional Coupler  from Anritsu

The MN25110A is a precision directional coupler that operates from 20 GHz to 110 GHz. It is equipped with Anritsu's Trademarked W1 connectors (1.0 mm compatible) that achieve the smallest possible reflections and have a very low broadband insertion loss. The MN25110A enables users to conduct broadband measurements through the E, V and W bands.
Download Datasheet | Product Details
RF Amplifier
22 dBm Broadband Amplifier from 10 MHz to 47 GHz

RF Amplifier  from AT Microwave

The AT-BB-0047-2720C from AT Microwave is a Broadband Amplifier that operates from 10 MHz to 47 GHz. It can be used both as a power and low noise amplifier. The amplifier provides a saturated output power of 22 dBm with a small signal gain of 27 dB. It requires a DC supply of 8 V and consumes up to 400 mA of current.
Download Datasheet | Product Details
TCXO
Ultra-Stable MEMS Based TCXOs for 5G, Small Cell and Time Synchronization

TCXO  from SiTime

The Elite Platform® Super-TCXOs from SiTime are Super Temperature Controlled Crystal Oscillators (TCXO) that operate from 1 to 220 MHz. These TCXOs use SiTime’s unique DualMEMS™ and TurboCompensation™ temperature sensing technology. They have frequency stability from ±0.05 ppm to ±2.5 ppm and better dynamic stability (1 ppb/°C typical frequency slope) than their quartz counterparts.
Download Datasheet | Product Details
Cellular IoT Module
Ultra High Speed LTE Cat-16 IoT Module

Cellular IoT Module  from Thales

The PLPS9 from Thales Group is an IoT Wireless Module that provides global LTE Cat 16 coverage with 3G/2G fallback connectivity and is integrated with GNSS that enables quick and accurate positioning capabilities. It has been designed for industrial solutions that require ultra-high-speed global connectivity and supreme reliability.
Download Datasheet | Product Details
RF Transceiver
480 Mbps Ultra-Wideband Technology SoC

RF Transceiver  from Starix Technology

The STX1001 from Starix Technology is a highly integrated UWB CMOS SoC with support for Band Group 1 (3.168 - 4.752 GHz) and Band Group 3 (6.336 -7.920 GHz). It has integrated Protocol Adaptation Layers, a Media Access Controller (MAC), a baseband processor, RF transceivers, and USB 2.0 and SDIO interfaces. It is available in an ultra-compact Quad Flat No-Lead (64-pin QFN) plastic package that measures 9 x 9 mm.
Download Datasheet | Product Details
Sponsored by Rohde & Schwarz
Rohde & Schwarz
Meet our new product family of 5G NR testing equipment
New technologies such as mMIMO, increased bandwidths and data rates and the introduction of mmWave frequencies require more computing power and robust RF hardware. Overcome these challenges with a family of testing equipment perfected for 5G applications in development, QM acceptance testing and production. Click here to learn more.
 
RF Transistor
5 W LDMOS Integrated Doherty MMIC from 859 to 960 MHz

RF Transistor  from Ampleon

The BLM9D0910-05AM from Ampleon is a 1-Stage LDMOS Integrated Doherty MMIC that operates from 859 to 960 MHz. It delivers an output power of 5 W with a power gain of 18 dB and an efficiency of 38.4% while operating at a supply voltage of 28 V. The carrier and peaking device, input splitter, output combiner, and pre-match are integrated into a single package, along with an ESD protection circuit.
Download Datasheet | Product Details
RF Transistor
130 W GaN HEMT from DC to 3 GHz

RF Transistor  from Sumitomo Electric Device Innovations

The SGNH130M1H from Sumitomo Electric is a high-power GaN HEMT that operates from DC to 3 GHz. It delivers a power of 130 W (@ 2.45 GHz) with a gain of more than 13.1 dB and has an efficiency of 59% (@ 2.45 GHz). The HEMT is available in a small flangeless package that measures 11.8 x 6.35 mm and requires a DC supply voltage of 50 V.
Download Datasheet | Product Details
Front End Module
GaN on SiC Front End Module for S-Band Radar Systems

Front End Module  from RFHIC

The HR3135-10A from RFHIC is a Front End Module that operates from 3.1 to 3.5 GHz (Tx) and 2.9 to 3.5 GHz (Rx). On the Tx side, it delivers an output power of more than 41 dBm with a typical gain of 21.5 dB and an efficiency of up to 45%. It provides a pulse width of up to 100 us with a duty cycle of 10% (max). On the Rx side, it has a noise figure of less than 3.5 dB.
Download Datasheet | Product Details
RF Variable Attenuator
95 dB USB Controlled Programmable Attenuator from 200 to 8000 MHz

RF Variable Attenuator  from JFW Industries

The 50P-2111 from JFW Industries is a Bi-Directional, Solid-State Programmable Attenuator that operates from 200 to 8000 MHz. It has an attenuation range from 0 to 95 dB with a step size of 1 dB (1, 2, 4, 8, 16 and 32 dB step options available). The attenuator has an insertion loss of less than 7 dB and a typical switching speed of 0.7 µs.
Download Datasheet | Product Details
Block Up Converter
X-Band GaN SATCOM Block Upconverter

Block Up Converter  from Comtech Xicom Technology

The Bobcat 40X from Comtech Xicom Technology is an X-band GaN SATCOM BUC that up-converts an input frequency from 950 - 1450 MHz to an output frequency from 7.9 - 8.4 GHz. It provides 20 W of linear output power for SATCOM uplinks with a gain of 55 dB and has a phase noise of -103 dBc/Hz @ 1 MHz offset.
Download Datasheet | Product Details
RF Cable
High Flexible RF Cables for Navigation, Sensing, and Communication Systems

RF Cable  from Times Microwave Systems

The Times Commercial Air (TCA) Series from Times Microwave Systems are high performance Flexible RF Cables that are designed for navigation, collision avoidance, sensing, and communications systems. They have a shielding effectiveness of 90 dB and capacitance of 25.5 pF. These cables are significantly lighter than MIL-DTL-17 cables and have low loss characteristics with an operating temperature from -55 to 200 degrees C.
Download Datasheet | Product Details
Phase Noise Analyzer
10 MHz to 26 GHz Real-Time Phase Noise Analyzer

Phase Noise Analyzer  from Holzworth Instrumentation

The HA7062D from Holzworth is a real time phase noise analysis system that operates from 10 MHz to 26 GHz (optional to 40 GHz). It provides measurement offsets from 0.1 Hz to 100 MHz. The HA7062D has a high speed digital processor for speed, but the proven accuracy and speed starts with the analog front end.
Download Datasheet | Product Details
Sponsored by Rohde & Schwarz
 
 
 
Front End Module
2.4 GHz Zigbee / Thread / Bluetooth Front-End Module

Front End Module  from Skyworks Solutions

The SKY66408-11 from Skyworks is a high-performance, fully integrated RF front-end module (FEM) designed for 2.4 GHz Zigbee, Thread, and Bluetooth (including Low Energy) applications. It is designed for ease of use and maximum flexibility. The module includes an integrated PA with an output power of up to +21 dBm, integrated LNA with a typical noise figure of 2.5 dB and an antenna diversity switch for all modes.
Download Datasheet | Product Details
Vector Network Analyzer
1-Port USB Vector Network Analyzer from 1 MHz to 18 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The R180 from CMT is a handheld 1-Port VNA that provides lab grade performance from 1 MHz to 18 GHz. This 1-Port VNA (Cable and Antenna Analyzer) can connect directly to the DUT, as a result of which it has excellent measurement accuracy by eliminating the practical limitation of test cables. The R180 can be controlled and powered through a USB-C port or through an external 5 VDC power supply.
Download Datasheet | Product Details
RF Amplifier
10 W Solid State Amplifier from 26.5 to 40 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP4072A from Exodus Advanced Communication is a Solid State Amplifier that operates from 26.5 to 40 GHz. This class AB linear amplifier provides an output power of 10 W with a gain of 40 dB and has excellent gain flatness. It has local (LCD) and remote control interfaces which can be used to monitor Forward/Reflected power, voltage, current & temperature sensing.
Download Datasheet | Product Details
RF Amplifier
1000 W Solid-state, Broadband Amplifier System from 1 to 2.5 GHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 1000S1G2z5B from AR RF/Microwave Instrumentation is a Solid-state, Self-contained, Air-cooled, Broadband Amplifier system that operates from 1 to 2.5 GHz. This amplifier when used with a sweep generator, provides over 1000 W of RF power with a gain of over 60 dB. It is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier.
Download Datasheet | Product Details
RF Shielded Test Enclosure
RF Shielded Test Box for EMC Testing from 20 MHz to 6 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-6U60-B1 from RF Electronics is a RF Shielded Test Box that operates from 20 MHz to 6 GHz. It has a thick RF absorbing foam that provides isolation of more than 130 dB which attenuates standing waves and reflections. The RF Test box is equipped with shielded power filters for power connections in the box while still blocking all wireless signals.
Download Datasheet | Product Details
RF Amplifier
Low Noise Cryogenic Amplifier from 4 to 8 GHz

RF Amplifier  from AmpliTech

The APTC3-04000800-1K00-D4-V from Amplitech is a Low Noise Cryogenic Amplifier that operates from 4 to 8 GHz. It provides a gain of more than 40 dB with a noise figure of 0.35 dB and has a P1dB of -6 dB. The amplifier requires a DC supply of 0.7 V and draws 20 mA of current (typical) while consuming 2.5 mW of power at 4°Kelvin.
Download Datasheet | Product Details
Directional Coupler
10 dB SMA Directional Coupler from 2 GHz to 20 GHz

Directional Coupler  from HASCO Components

The HC0220-10 from HASCO is a directional coupler that operates from 2 GHz to 20 GHz. It has 10 dB coupling with an insertion loss of less than 1 dB and directivity of 15 dB. The coupler can handle up to 50 W of CW power and 3 KW of peak power. It is available in a module with SMA Female connectors that are matched to 50 Ohms.
Download Datasheet | Product Details
Fixed Attenuator
Fixed Attenuator from DC to 50 GHz

Fixed Attenuator  from MECA

The 669-00-1 from MECA is a Fixed Attenuator that operates from DC to 50 GHz. It has attenuation values of 0, 3, 6, 10, 20, and 30 dB (DC to 26.5 GHz). The attenuator can handle an input power of 0.5 W and has a VSWR of less than 1.35:1. It is available in a module with a 2.4 mm Male connector at the input and a 2.4 mm Female connector at the output.
Download Datasheet | Product Details
Antenna
5/6 GHz Embedded PCB Wi-Fi Antenna Family

Antenna  from AVX Corporation

The W2P15x7W04 Family from AVX/Ethertronics’ is a series of Embedded Wi-Fi Antennas that operate from 5150-5850 MHz and 5925-7127 MHz. They provide a peak gain of up to 4.5 dBi, have a return loss of 9 dB and efficiency up to 70%. They are available in a package that measure 15.9 x 7.6 x 0.4 mm with adhesive, cable and connector mounting options.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]