PREV 17 Feb, 2021 NEXT

New RF and Microwave Products this Week

17 Feb, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 17 Feb, 2021
 
Sponsored by Mouser
 
 
 
New RF and Microwave Products this Week
RF Amplifier
High-efficiency Power Amplifiers for 4G LTE and 5G NR Applications

RF Amplifier  from Skyworks Solutions

The SKY66320-11 from Skyworks is a Power Amplifier that operates from 3600 to 3800 MHz. It provides a P1dB of 32 dBm with a gain of 33 dB and an IP3 of 27 dBm. This highly efficient amplifier requires a supply voltage of 5 V and has a wide, instantaneous carrier bandwidth of 100 MHz. It is ideal for 5G NR, 4G LTE, small cell, and massive MIMO applications.
Download Datasheet | Product Details
Tunable Filter
Digitally Tunable MMIC Multioctave Filter from 2 to 18 GHz

Tunable Filter  from Analog Devices

The ADMV8818 from Analog Devices is a Digitally Tunable MMIC Multioctave Filter that operates from 2 to 18 GHz. The filter consists of four independently controlled high-pass filters (HPFs) and low-pass filters (LPFs). The digital logic control on each filter is 4 bits wide (16 states) and can drive the on-chip reactive elements to adjust the 3 dB cut off frequency for up to 4 GHz of bandwidth.
Download Datasheet | Product Details
RF Variable Attenuator
2-Channel Programmable Ethernet Powered Attenuator from 50 to 8000 MHz

RF Variable Attenuator  from Adaura Technologies

The AD-USB2AR38G95 from Adaura Technologies is 2-Channel USB/Ethernet Controlled attenuator that operates from 50 to 8000 MHz. It has an attenuation range from 0 to 95 dB with a step size of 0.25 dB. The attenuator has an insertion loss of 12.5 dB and provides isolation of 120 dB. It can handle input power up to 28 dBm and has a switching speed of 520 ns.
Download Datasheet | Product Details
RF Amplifier
X-Band Transmitter from 9.3 to 9.7 GHz for Radar Applications

RF Amplifier  from RFHIC

The RRT9397400-560 from RFHIC is an X-band Solid-State Transmitter designed for high power radar and weather radar applications. It operates from 9.3 to 9.7 GHz while providing up to 400 W of power with a gain of 56 dB and an efficiency of 25%. This solid-state device has a pulse droop of 1 dB and a duty cycle of 10%.
Download Datasheet | Product Details
RF Amplifier
21 dBm GaAs Power Amplifier MMIC from 12 to 15 GHz

RF Amplifier  from arQana Technologies

The AAA4502-QO from arQana Technologies is a GaAs MMIC high power amplifier that operates from 12 to 15 GHz. It can handle an input power of 10 dBm and delivers a saturated output power of 21 dBm with a gain of 16 dB. The amplifier is designed using 0.25 µm pHEMT technology and has an input return loss of less than 10 dB. It requires a supply voltage of 12 V and draws up to 200 mA of current.
Download Datasheet | Product Details
RF Amplifier
20 dBm Distributed Amplifier Die from DC to 50 GHz

RF Amplifier  from Mini Circuits

The LTA-M1109-D+ from Mini Circuits is a Distributed Amplifier that operates from DC to 50 GHz. It provides a gain of more than 13 dB and has a P1dB of 20 dBm. The amplifier provides an isolation of 36 dB and has a noise figure of less than 11.8 dB. It is fabricated using a PHEMT process that delivers exceptional broadband RF performance and is well matched to 50 ohms.
Download Datasheet | Product Details
Sponsored by Mouser
Mouser
Measure an RF signal over a wide 100MHz to 70GHz frequency range
Analog Devices LTC5597 RMS Power Detector is designed to measure RF power independent of input waveforms with different crest factors, such as CW, WCDMA, and OFDM (LTE and Wi-Fi®) signals. Up to 35dB dynamic range is achieved with a very stable output within the full case temperature range. Click here to learn more.
 
Phase Noise Analyzer
10 MHz to 6 GHz (Optional to 24 GHz) Real-Time Phase Noise Analyzer

Phase Noise Analyzer  from Holzworth Instrumentation

The HA7062C from Holzworth is a real time fully integrated phase noise analysis system that operates from 10 MHz to 6 GHz. It utilizes the same core engine from the HA7402C analyzer along with a pair of high performance RF Synthesizers as the test signal LOs. The stability of the agile synthesizers operating as LO sources for the high speed, cross-correlation core enables an extremely reliable phase noise analyzer.
Download Datasheet | Product Details
Vector Network Analyzer
2-Port and 4-Port Vector Network Analyzers from 900 Hz to 67 GHz

Vector Network Analyzer  from Keysight Technologies

The N5227B Series from Keysight Technologies are 2-Port and 4-Port Vector Network Analyzers that operates from 900 Hz to 67 GHz. These VNAs can measure S-parameters with the smallest uncertainty and high stability, and efficiently characterize active components with applications that simplify setups. They contain a proprietary low-spurious direct digital synthesis (DDS) source, enabling customers to take accurate measurements with less phase noise interference.
Download Datasheet | Product Details
Vector Network Analyzer
Multiport Network Analysis Solution for 5G Applications

Vector Network Analyzer  from Copper Mountain Technologies

The RNVNA from Copper Mountain Technologies is a customizable Multiport Network Analysis Solution for antennas and other 5G applications. It has been built using CMT 1-Port USB vector network analyzers and operates over a frequency of 1 MHz to 18 GHz. It is compatible with all Copper Mountain Technologies’ 1-Port USB VNAs with frequency ranges up to 6 GHz (R60), 14 GHz (R140), and 18 GHz (R180).
Download Datasheet | Product Details
Software
3D EM Simulation Software for High-Fidelity Computations

Software  from Remcom

XFdtd is a full-wave 3D EM solver that simplifies the analysis of complex EM problems and leads the market in FDTD-based modeling and simulation. With unrivaled speed, XF is the leader for complex, high-fidelity EM simulations. Applications include microwave devices such as waveguides, power dividers, and filters, antenna design and placement, EMI/EMC testing, static discharge, signal integrity, SAR validation, radar and scattering, and photonics.
Download Datasheet | Product Details
Wireless SoC
Bluetooth Low Energy (5.2) SoC for Industrial and Home Automation

Wireless SoC  from STMicroelectronics

The BlueNRG-LP from STMicroelectronics is a Programmable Bluetooth Low Energy 5.2 SoC that is designed for ultra-low latency applications. It provides a data rate of up to 2 Mbps and is compliant with Bluetooth mesh networking specifications. This SoC delivers a programmable output power of up to 8 dBm and has an Rx sensitivity of -97 dBm @1 Mbps.
Download Datasheet | Product Details
Cellular IoT Module
CAT-M1 IoT Chipset with CAT-1 Fallback

Cellular IoT Module  from Sony Semiconductor Israel

The ALT1210 from Sony Semiconductor Israel is a CAT-M1 IoT Chipset with CAT-1 Fallback. This IoT module features downlink speeds up to 1 Mbps, with extremely low power consumption, and is software upgradeable to single antenna LTE CAT-1. It is ideal for a variety of IoT applications such as wearable devices, video cameras, industrial devices, and more.
Download Datasheet | Product Details
Sponsored by Mouser
 
 
 
DLVA
Miniature Successive Detection Log Video Amplifier from 0.1 to 2 GHz

DLVA  from Planar Monolithics Industries

The SDLVAC-0120-70M from Planar Monolithics Industries is a Miniature Successive Detection Log Video Amplifier (SDLVA) that operates from 0.1 to 2 GHz. It has a dynamic range from 65-70 dB, a TSS (Tangential signal sensitivity) of -67 dBm, and a nominal video bandwidth of 20 MHz. This video amplifier has a log slope of 25 mV/dB and a fast rise time of 20 ns with a delay time of 8 ns.
Download Datasheet | Product Details
Band Pass Filter
962-1008 / 1053-1065 / 1113-1215 MHz High Power Band Pass Filter

Band Pass Filter  from K&L Microwave

The SPCL-00726 from K & L Microwave is a High Power JTIDS/MIDS Triple Band Bandpass Filter with passbands from 962-1008 MHz, 1053-1065 MHz, and 1113-1215 MHz. It can handle up to 500 W of average input power and has a VSWR of under 1.7:1. The filter has an insertion loss of less than 0.75 dB, a group delay of 22 ns and provides a rejection of -45 dBc from 3000 - 6000 MHz.
Download Datasheet | Product Details
Power Divider
8-Way Resistive Power Divider/Combiner from DC to 7.2 GHz

Power Divider  from JFW Industries

The 50PD-871 from JFW is an 8-Way resistive power divider/combiner that operates from DC to 7.2 GHz. It can handle an average input power of up to 1 W and has an insertion loss of less than 20 dB with a VSWR of 1.6:1. The divider is designed with an asymmetrical star layout so that all paths have equal losses.
Download Datasheet | Product Details
Power Divider
2-Way Power Divider from 1 to 1000 MHz

Power Divider  from MiniRF

The MRFSP4525 from MiniRF is a 2-Way Power Divider that operates from 1 to 1000 MHz. It can handle an RF input power of 2 W, has an insertion loss of less than 1 dB and provides an isolation of more than 20 dB. The splitter has an amplitude balance of under 0.25 dB and a phase balance of less than 3 degrees. It is available in a tape-and-reel surface-mount package that measures 3.81 x 3.81 x 2.92 mm.
Download Datasheet | Product Details
Block Up Converter
50 W Ka-Band Deck Block up Converter from 27.5 to 30 GHz

Block Up Converter  from Wavestream Corporation

The WBAN-050G01-0005 from Wavestream is a Ka-band Deck Block up Converter that up-converts an input frequency from 950-1950 MHz to an output frequency from 27.5-30 GHz. It consists of a linear power amplifier that provides a saturated output power of 47 dBm with a small signal gain of 62.5 dB. The BUC has a noise power density of -75 dBm/Hz (Tx) and -156 dBm/Hz (Rx).
Download Datasheet | Product Details
Directional Coupler
12 dB Surface-Mount Directional Coupler from 7 to 12 GHz

Directional Coupler  from Electro-Photonics LLC

The Q10HA-9500R from Electro-Photonics is a Surface-mount Directional Coupler that operates from 7 to 12 GHz. It provides 12 dB of coupling, has a directivity of 14 dB and an insertion loss of less than 0.50 dB. The coupler can handle an input power of up to 20 W and has a VSWR of less than 1.4:1. It offers low insertion loss, tight coupling, low amplitude balance, and close phase tracking.
Download Datasheet | Product Details
Power Divider
4-Way Amplified GPS Splitter from 1.1 to 1.7 GHz for Military Applications

Power Divider  from GPS Networking

The MIL-ALDCBS1X4 from GPS Networking is a 4-Way amplified GPS Splitter that operates from 1.1 to 1.7 GHz. The amplifier provides a gain of more than 17 dB and has a noise figure of 3.5 dB. The splitter has a P1dB of -14 dBm and an isolation of over 15 dB. It has an amplitude balance of less than 1 dB and a phase balance of 1 degree.
Download Datasheet | Product Details
Antenna
MIMO DAS Antennas from 617-960/1695-2690/3300-4200 MHz

Antenna  from Galtronics USA, Inc

The GI1202-07362 from Galtronics USA is a MIMO DAS Antenna that operates from 617-960 MHz, 1695-2690 MHz, and 3300-4200 MHz. This horizontally polarized antenna provides a gain of more than 4.6 dBi and has a VSWR of less than 1.9:1. It can handle an input power of 50 W per port and has a PIM of -153 dBc.
Download Datasheet | Product Details
RF Cable Assembly
2.92mm Cable Assembly from DC to 40 GHz

RF Cable Assembly  from P1dB Inc.

The P1CA-29M29M-SS085-1M-PM from P1dB is a 50 Ohm RF cable assembly that operates from DC to 40 GHz. It is a low loss flexible cable that is 1 m in length and has a minimum bend radius of 0.25 inches. The cable has an insertion loss of less than 1.9 dB/ft and a VSWR of under 1.45:1. It has 2.92mm male connectors on either end and uses P1dB's SS085 flex coax which is a phase-stable RF cable with a 0.104 inch (2.6mm) outer diameter.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]