| New RF Products for Aerospace & Defense |
|
|
| Image Reject Mixer from 24 to 34 GHz | |
RF Mixer
from Qorvo
|
| The QPX0004D from Qorvo is an I/Q Mixer with an RF/LO frequency range from 24 to 34 GHz and an IF frequency range from DC to 7 GHz. It can handle an input power of up to 11 dBm, has a low conversion loss of less than 9 dB, and has an IP3 of 19 dBm. This mixer provides an image rejection of 15 dB, has an LO/RF isolation of 30 dB and an LO/IF isolation of 24 dB. It can be configured as an image reject mixer, a single sideband upconverter, or a QPSK modulator/demodulator. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Noise Amplifier from 6 to 12 GHz | |
RF Amplifier
from ERZIA
|
| The ERZ-LNA-0600-1200-35-3 from ERZIA is a Low Noise Amplifier that operates from 6 to 12 GHz. It provides a gain of 35 dB (±1 dB), has a noise figure of less than 2.5 dB and an output P1dB of 20 dBm. The LNA requires a DC supply voltage of 12 V and consumes 2 W of power. It is available in a compact module that measures 17.8 x 16.3 x 7.3 mm with SMA female connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 12 kW Pulsed SSPA System from 150 to 450 MHz | |
RF Amplifier
from Empower RF
|
| The 2210 from Empower RF Systems is a Pulsed Solid State Power Amplifier (SSPA) System that operates from 150 to 450 MHz. It consists of two 5U solid state power amplifiers, two 1U AC/DC power convertors and a 5U control/combining interface assembly. This amplifier system provides a pulsed output power of 12 kW with a gain of 73 dB, has a pulse width from 0.002 to 2 ms and a duty cycle from 1 to 20%. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 8 W GaN Power HEMT Die from DC to 26 GHz | |
RF Transistor
from BeRex, Inc.
|
| The BCG008 from BeRex is a GaN Power HEMT Die that is suited for amplifier applications from DC to 26 GHz. At a 12 GHz test frequency, it delivers a saturated output power of 8 W (~39 dBm) with a gain of more than 8 dB and power-added efficiency (PAE) of 72%. This GaN-based transistor has been developed using state-of-the-art metallization with SI3N4 passivation and is screened for reliability. |
| |
Download Datasheet
Product Details | |
|
|
|
| Coaxial DPDT Switch from 0.5 to 26 GHz | |
RF Switch
from RF-Lambda
|
| The RFDPDTA5M26G from RF-Lambda is an Ultra-Wide Band Coaxial DPDT Switch that operates from 0.5 to 26 GHz. It can handle an input power of up to 23 dBm, has an insertion loss of less than 6 dB with a temperature coefficient of 0.003 dB/°C and provides high isolation of 45 dB. This DPDT switch has a fast switching speed of less than 100 ns and a VSWR of 2.5:1. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Low Cost, Real Time Spectrum Analyzer from 100 kHz to 20 GHz | |
RF Spectrum Analyzer
from Signal Hound
|
| The SM200B from Signal Hound is a high-performance RF spectrum analyzer and monitoring receiver that operates from 100 kHz to 20 GHz. The analyzer has 160 MHz instantaneous bandwidth (IBW) calibrated I/Q capture, available through block transfer of a 2-second I/Q buffer over USB 3.0 to the PC. This added 2-seconds of segmented I/Q capture memory, with advanced triggering options such as frequency mask triggering (FMT) plus user-specified pre and post-trigger, satisfies the ever-increasing analysis bandwidth demands of the wireless industry. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
