PREV 10 Mar, 2021 NEXT

New RF and Microwave Products this Week

10 Mar, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 10 Mar, 2021
 
Sponsored by Digi-Key
 
 
 
New RF and Microwave Products this Week
RF Spectrum Analyzer
Real-Time Outdoor Remote Spectrum Analyzer from 8 kHz to 8 GHz

RF Spectrum Analyzer  from Narda Safety Test Solutions

The SignalShark Outdoor Unit from Narda Safety Test Solutions is a Real-Time Outdoor Remote Spectrum Analyzer that operates from 8 kHz to 8 GHz. It supports automatic direction finding and localization via AoA (Angle of Arrival) and TDOA (Time Difference of Arrival). The analyzer has three switchable RF inputs and an RF front-end module that offers outstanding sensitivity and has a wide dynamic range.
Download Datasheet | Product Details
Laminate
Halogen-free, Ultra-low Transmission Loss Dielectric Material for mmWave Applications

Laminate  from Panasonic Corporation

The R-5515 from Panasonic is a Halogen-free Ultra-low Transmission Loss Dielectric Material that is used to provide insulation in a PCB. It is based on Panasonic's proprietary thermosetting resin design technology and exhibits excellent dielectric properties. It enables multi-layer antenna constructions and improves the design flexibility of high-frequency circuit boards.
Download Datasheet | Product Details
Oscilloscope
4-Channel, 5 GHz Sampler-Extended Real Time Oscilloscope

Oscilloscope  from Pico Technology

The 9404-05 from PicoScope is a 5 GHz Sampler-Extended Real-time Oscilloscope (SXRTO) that combines the benefits of real-time sampling, equivalent-time sampling and high analog bandwidth. It has 4 input channels with excellent ADC, timing, and display resolutions for accurately measuring and visualizing high-speed analog and data signals.
Download Datasheet | Product Details
RF Switch
SP25T Non-Reflective Switch Matrix From 0.5 to 18 GHz

RF Switch  from American Microwave Corporation

The MSN-0518-25T-30DB-HERM-1JV from American Microwave Corporation is an SP25T Switch Matrix that operates from 0.5 to 18 GHz (can be extended up to 40 GHz). This non-reflective absorptive switch has an insertion loss of less than 10 dB, isolation of over 60 dB, and a switching time of less than 2 us. It has an integrated 30 dB coupler on its common port and uses a combination of suspended and stripline substrate designs.
Download Datasheet | Product Details
RF Switch
SP3T Reflective PIN-Switch from 2 to 18 GHz

RF Switch  from UMCC

The SW-S200-3S from Universal Microwave Components is an SP3T Reflective PIN-Switch that operates from 2 to 18 GHz. It has an insertion loss of less than 2.2 dB and provides an isolation of above 60 dB. The switch has a rise/fall time of 15 ns and an on/off time of 60 ns. It can handle an input power of up to 30 dBm (CW) or 10 W (Pulse) and has a VSWR of less than 1.7:1.
Download Datasheet | Product Details
RF Amplifier
120 W GaN Solid State Power Amplifier from 2 to 8 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP2085-1 from Exodus Advanced Communications is a GaN Power Amplifier that operates from 2 to 8 GHz. It provides an output power of more than 120 W with a gain of over 51 dB and excellent flatness compared to TWT’s. It can operate in both CW / Pulsed modes and supports all single channel modulation standards. It can be controlled from the front panel LCD display or via a remote interface.
Download Datasheet | Product Details
Sponsored by Digi-Key
DigiKey
LTC4372/LTC4373 Low Quiescent Current Ideal Diode Controllers Available from Digi-Key
The LTC4372 and LTC4373 are positive high voltage ideal diode controllers that drive an external N-channel MOSFET to replace a Schottky diode. They control the forward voltage drop across the MOSFET to ensure current delivery or current transfer from one path to another, even at light loads. Click here to learn more.
 
RF Amplifier
Low Phase Noise Amplifier from 0.1 to 22 GHz

RF Amplifier  from Marki Microwave

The APM-7098 from Marki Microwave is a Low Phase Noise LO Driver Amplifier that operates from 0.1 to 22 GHz. This amplifier provides a saturated output power of 23 dBm with a small signal gain of more than 6.5 dB and has a typical noise figure of 4.6 dB. It has a phase noise of -165 dBc/Hz at 10 kHz offset from the carrier frequency.
Download Datasheet | Product Details
Phase Noise Analyzer
10 MHz to 26 GHz Real-Time Phase Noise Analyzer

Phase Noise Analyzer  from Holzworth Instrumentation

The HA7062D from Holzworth is a real time phase noise analysis system that operates from 10 MHz to 26 GHz (optional to 40 GHz). It provides measurement offsets from 0.1 Hz to 100 MHz. It is available in a fully shielded, fan-less 1U chassis that completely eliminates ground loops and troublesome microphonics for uncompromised performance and repeatability.
Download Datasheet | Product Details
Front End Module
2.4 GHz 2 x 2 MIMO Wi-Fi 6 Front-end Module

Front End Module  from NXP Semiconductors

The WLAN8101H from NXP Semiconductors is a 2.4 GHz 2 x 2 MIMO Wi-Fi 6 Front-end Module. It includes two monolithic front-end ICs, each having an integrated transmit power amplifier with directional coupler, a low-noise receive amplifier and a transmit/receive switch for the Bluetooth channel. The FEM also includes coexistence filters for both transmit and receive channels.
Download Datasheet | Product Details
RF Switch
Dual-Path RF Front End Module from 2.3 to 2.7 GHz

RF Switch  from Renesas

The F0452B from Renesas is a Dual Path RF Front End Module that consists of an RF switch and two gain stages with 6 dB gain control used in the analog front-end receiver of an Active Antenna System (AAS). It operates from 2.3 to 2.7 GHz, has a gain of 34 dB with a noise figure of 1.5 dB and P1dB of 15 dBm.
Download Datasheet | Product Details
RF Test Set
5G/LTE/802.11ax Universal Wireless Test Set from 10 MHz to 6 GHz

RF Test Set  from Anritsu

The MT8872A from Anritsu is a Universal Wireless Test System that operates from 10 MHz to 6 GHz. It has been designed for testing high volume smartphones, tablets, Automotive Solutions, IoT devices and wireless modules. The test set supports various wireless communications standards, including 5G NR Sub-6 GHz, LTE/LTE-Advanced, LTE-V2X, NB-IoT, Cat-M, V2X 802.11p, WLAN and Bluetooth.
Download Datasheet | Product Details
RF Switch
SP6T Absorptive Switch from DC to 18 GHz

RF Switch  from RF-Lambda

The RFSP6T18EMA-S from RF-Lambda is an Absorptive SP6T Electro-Mechanical Switch that operates from DC to 18 GHz. It can handle an input power of up to 1 W, has an insertion loss of 0.5 dB and provides an isolation of 75 dB. The switch operates over a supply voltage of 24 V, draws up to 0.2 A and has a switching speed of under 20 ms.
Download Datasheet | Product Details
Sponsored by Digi-key
Digikey
EDGE Connect enables real-time insights and telemetry to improve enterprises
It's a next-generation IoT platform that provides cellular, Bluetooth®, onboard sensors and GNSS expansion options from an ultra-low-power device. With EDGE Insights™ cloud-based management platform, it provides an out-of-the-box solution for easy control. Click here to learn more.
 
RF & Microwave Isolator
75 W, Coaxial Isolator from 1 to 2 GHz

RF & Microwave Isolator  from MECA

The IS-1.500-M01 from MECA is an RF Coaxial Isolator that operates from 1 to 2 GHz. It provides isolation of over 18 dB and has an insertion loss of 0.4 dB. The isolator can handle up to 75 W of average power and 100 W of peak power with a VSWR of less than 1.30:1. It is available in a module with SMA-Female connectors.
Download Datasheet | Product Details
Band Pass Filter
1000 MHz Bandpass Filter

Band Pass Filter  from KR Electronics Inc

The 3450-SMA from KR Electronics is a Bandpass filter with a center frequency of 1000 MHz. It has 1 dB bandwidth of 50 MHz with an insertion loss of less than 3.5 dB and 50 dB of stopband attenuation. This 50-ohm filter is available in a module with SMA-female connectors. Other center frequency and bandwidth options are available on request.
Download Datasheet | Product Details
RF Switch
SPDT Tx/Rx Switch from 200 to 2000 MHz

RF Switch  from AMCOM Communications, Inc.

The AM022050S2-0H from AMCOM is an SPDT Switch that operates from 200 to 2000 MHz. It has an insertion loss of less than 1 dB, provides an isolation of over 25 dB and has a switching speed of under 10 µs. This Tx/Rx switch can handle an input power of 50 dBm and has a VSWR of less than 2:1. It is available in a module that measures 4000 x 4000 x 1000 mm.
Download Datasheet | Product Details
Limiter
100 W CW Active Limiter from 2 to 4 GHz

Limiter  from Planar Monolithics Industries

The LM-2G4G-15-100W-SFF from PMI RF is a High-Power Limiter that operates from 2 to 4 GHz. It can handle 100 W of CW power and 250 W of peak power with a 1 ms pulse and 10% duty cycle. The limiter has flat leakage of less than 21 dBm and a recovery time of less than 1 µs. It has an insertion loss of 1.5 dB and a VSWR of 2:1.
Download Datasheet | Product Details
Wireless SoC
Bluetooth 5.2 SoCs for High-Volume IoT Products

Wireless SoC  from Silicon Labs

The BG22 Series from Silicon Labs are Bluetooth low energy (BLE) wireless SoC solutions that are part of the Wireless Gecko Series 2 platform. These SoCs are ideal for enabling user-friendly Bluetooth 5.2 networking for high-volume IoT products. The SoCs include up to 512 kB of flash and 32 kB of RAM and feature Bluetooth 5.2 direction finding.
Download Datasheet | Product Details
RF Amplifier
Low Noise Amplifier MMIC from 0.01 to 26.5 GHz

RF Amplifier  from Analog Devices

The ADL9005 from Analog Devices is a Low Noise Amplifier MMIC that operates from 0.01 to 26.5 GHz. It provides a gain of 17.5 dB with a noise figure of less than 4 dB and saturated output power of up to 16 dBm. The amplifier is based on GaAs pHEMT technology and requires a supply voltage of 5 V while consuming 80 mA of current.
Download Datasheet | Product Details
RF Repeaters
0.5 W Digital Repeater 700/800 MHz Public Safety Applications

RF Repeaters  from Advanced RF Technologies

The PSR-78-8527 from ADRF Tech is a 700/800 MHz Channelized Digital Repeater designed for Public Safety Applications. It supports all 700 and 800 MHz public safety frequency bands, including FirstNet (Band 14) and complies with the latest IFC and NFPA code requirements. This 0.5 W digital repeater is available in a compact form factor and has a lower total cost of ownership (TCO).
Download Datasheet | Product Details
Microwave Backhaul Radio Links
Outdoor Multi-Gigabit Radio from 71-76/81-86 GHz

Microwave Backhaul Radio Links  from Intracom Telecom

The UltraLink-GX80 from Intracom Telecom is a compact all-outdoor Ethernet/CPRI Radio that operates from 71-76 GHz and 81-86 GHz. With a high system gain, it achieves a throughput of up to 10 Gbps (full duplex) which makes the radio suited for use in demanding applications requiring ultra-high capacity. It has channel sizes of 125/250/500/750/1,000/1,500/2,000 MHz.
Download Datasheet | Product Details
GPS/GNSS Antenna
Helical Antenna for Precision GNSS Applications

GPS/GNSS Antenna  from Tallysman Wireless

The HC975 from Tallysman is a Triple-Band Helical Antenna that is designed for precision GNSS applications and L-Band correction services. It features an industry-leading low current, low-noise amplifier (LNA) that includes an integrated low-loss pre-filter to prevent harmonic interference from high-amplitude signals.
Download Datasheet | Product Details
Antenna
4G/5G/CBRS Direct Mount Omnidirectional Antenna from 698 to 4200 MHz

Antenna  from Laird Connectivity

The OC69421 from Laird Connectivity is a 4G/5G/CBRS Direct Mount Omnidirectional Antenna that operates from 698 to 4200 MHz. It provides a gain of 5 dBi and has an efficiency of 81% from 3300-4200 MHz. This linearly/vertically polarized antenna can handle an input power of up to 20 W and has a VSWR of less than 2.0:1.
Download Datasheet | Product Details
Antenna
600 MHz to 6 GHz Antennas for 5G, LTE and Wi-Fi Applications

Antenna  from Parsec Technologies, Inc.

The Belgian Shepherd Pro Series Antennas from Parsec Technologies are antennas that operate from 600 MHz to 6 GHz for 5G, LTE and Wi-Fi applications. These Linear/RHCP polarized antennas support 4x4 MIMO LTE, 4x4 MIMO Wi-Fi, and GPS. They provide a peak gain from 5 to 8 dBi, an isolation of above 7.5 dB and can handle up to 5 W of input power.
Download Datasheet | Product Details
GNSS OEM Board
C1 GNSS OEM Receiver with High Precision RTK and Dual-Antenna Heading

GNSS OEM Board  from Hunan BYNAV Technology Co., Ltd

The UG017 from Bynav is a C1 GNSS OEM Receiver that supports GPS, GLONASS, BDS, BDS-3, GALILEO, QZSS, SBAS, and IRNSS constellations. It is capable of providing full-constellation and multi-frequency RTK positioning for centimeter-level accuracy. The OEM board has a dual-antenna heading to further optimize the stability of positioning and heading under dynamic conditions.
Download Datasheet | Product Details
RFID Tag
7mm High Frequency RFID Laundry Tag

RFID Tag  from Omnia Technologies

The H090209 from Omnia Technologies is a High Frequency RFID Laundry Tag that operates at 13.56 MHz. It facilitates contactless tracking and inventory management of garments in the textile rental & industrial Laundry verticals. This tag is designed to withstand conditions of pressure, heat, and chemical resistance as per the requirements of the applications.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]