PREV 24 Mar, 2021 NEXT

New RF and Microwave Products this Week

24 Mar, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 24 Mar, 2021
 
Sponsored by Signal Hound
 
 
 
New RF and Microwave Products this Week
RF Mixer
GaAs IQ Mixer MMIC from 18 to 67 GHz

RF Mixer  from Marki Microwave

The MMIQ-1867LSM from Marki Microwave is a GaAs MMIC IQ Mixer with an RF/LO frequency from 18 to 67 GHz and an IF frequency of DC to 23 GHz. It has a conversion loss of less than 16 dB, a noise figure of 12 dB and provides an LO to RF isolation of 49 dB. This mixer has an amplitude balance of 0.2 dB, a phase balance of 3° and provides an image rejection of up to 50 dB.
Download Datasheet | Product Details
RF Amplifier
Power Amplifier from 24 to 30 GHz for High Data-rate Applications

RF Amplifier  from Altum RF

The ARF1010Q4 from Altum RF is a linear amplifier designed for high data-rate applications from 24 and 30 GHz. It provides a gain of 28 dBm and has a P1dB of 28 dBm, Saturated power of 30 dBm and OIP3 of 36 dBm. The amplifier requires a 4 V DC Supply and draws 600 mA of current. It is ideal for demanding, high-order modulation schemes such as millimeter-wave 5G.
Download Datasheet | Product Details
RF Amplifier
16 W GaN Power Amplifier from 27.5 to 31 GHz

RF Amplifier  from ERZIA

The ERZ-HPA-2700-3100-43 from ERZIA is a High-Power Amplifier that operates from 27.5 to 31 GHz. It delivers a saturated output power of 16 W (~42 dBm) with a gain of more than 46 dB and has a VSWR of less than 2:1. The amplifier is based on GaN technology and requires a DC supply voltage of 28 V while drawing 4100 mA of current.
Download Datasheet | Product Details
Limiter
PIN Diode Power Limiter from 500 MHz to 4 GHz

Limiter  from Teledyne e2v HiRel Electronics

The TDLM052402QC-290 from Teledyne e2v is a Quasi Active PIN Diode Power Limiter that operates from 500 MHz to 4 GHz. It can handle an average CW input power of up to 53 dBm, a peak input power of up to 63 dBm and has an insertion loss of less than 0.9 dB. The power limiter maintains a flat leakage power below 17 dBm and spike energy leakage of less than 0.5 ergs. It is ideal for demanding electronic warfare and radar applications.
Download Datasheet | Product Details
Signal Generator
10 MHz to 40 GHz, Phase Coherent, Multi-Channel RF Synthesizers

Signal Generator  from Holzworth Instrumentation

The HSX Series are broadband, phase coherent frequency sources that are available in five frequency configurations from 10 MHz to 3 GHz, 6 GHz, 12 GHz, 24 GHz and 40 GHz. They have industry leading phase noise and spectral purity performance coupled with a highly accurate dynamic range from -110 to 20 dBm.
Download Datasheet | Product Details
Frequency Synthesizer
14 GHz Fixed Frequency Synthesizer

Frequency Synthesizer  from Z-COMM

The SFS14000H-LF from Z-Communications is a Fixed Frequency Synthesizer that generates an output signal of 14 GHz using an external 100 MHz reference. The generated signal has an output power of more than -6 dBm with spurious suppression of -65 dBc, 2nd harmonic suppression of -20 dBc, and phase noise of -96 dBc/Hz at 10 kHz offset.
Download Datasheet | Product Details
Sponsored by Signal Hound
Signal Hound
The Powerful SM200C + Spike Spectrum Analyzer Software @ $16,240
The20 GHz SM200C is an extremely fast spectrum analyzer with 160 MHz of IBW I/Q streaming over 10GbE connection. When paired with Spike™ software you get aconfigurable interface with analysis modes like real-time, noise figure, WLAN, spectrum emission mask, plus an API for connecting to the analyzer with custom code. Spike™ turns your PC into an RF analysis powerhouse! Click here to learn more.
 
RF Amplifier
1000 W Solid-State Power Amplifier from 1 to 2.5 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP2082LC from Exodus Advanced Communication is a Solid-state High-Power Amplifier that operates from 1 to 2.5 GHz. It delivers a saturated output power of more than 1000 W with a gain of 60 dB. The amplifier has a Class A/AB linear design and uses high-power advanced devices that provide high efficiency with unprecedented reliability and ruggedness.
Download Datasheet | Product Details
RF Variable Attenuator
95 dB Benchtop Attenuator Assembly from 200 to 8000 MHz

RF Variable Attenuator  from JFW Industries

The 50BA-048-95 from JFW Industries is a Benchtop Attenuator Assembly that operates from 200 to 8000 MHz. It is available with two solid-state step attenuators each providing up to 95 dB of attenuation with a step size of 1 dB. The attenuators have an insertion loss of less than 8 dB and a switching speed of 4 µs. It is available in a mini-benchtop enclosure with SMA female connectors.
Download Datasheet | Product Details
Noise Source
Amplified AWGN Noise Modules from 10 Hz to 18 GHz

Noise Source  from Noisecom

The NC1000 Series from Noisecom are Amplified AWGN Noise Modules that operate from 10 Hz to 18 GHz. They produce white Gaussian noise up to +13 dBm and have a typical temperature coefficient of 0.025 dB/°C. The modules require a DC input voltage of 28 V (below 1.5 GHz) and 15 V (above 1.5 GHz).
Download Datasheet | Product Details
Vector Network Analyzer
Compact USB VNA from 20 kHz to 3.0 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The S7530 from Copper Mountain Technologies is a 75 Ohm 2 Port compact VNA that operates up to 3 GHz. It has a wide dynamic range and can be operated with any Windows PC or laptop. Its small size makes it easy to carry around to test sites or to share within a team. In addition to S parameters (S11, S12, S21, S22) this VNA has a variety of analysis capabilities, including time-domain with gating and frequency offset modes.
Download Datasheet | Product Details
RF Amplifier
250 W Power Amplifier from 1 to 6 GHz

RF Amplifier  from SUNGSAN

The SA1059 from SUNGSAN is a Power Amplifier that operates from 1000 to 6000 MHz. It delivers an output power of more than 250 W with a gain of 54 dB and 3 dB flatness. The amplifier has 2nd harmonics of -20 dBc and a VSWR of less than 2:1. It is available in a module that measures 600 x 1000 x 1500 mm and has SMA female and N-type female connectors.
Download Datasheet | Product Details
Power Divider
30 Watts, 2 Way Power Divider from 698 to 2700 MHz

Power Divider  from VidaRF

The VPD-0627A2 from VidaRF is a 2 way power divider that operates from 0.698 to 2.7 GHz. It can handle up to 30 Watts of power, has an insertion loss of less than 0.5 dB and isolation over 20 dB. The power divider is available with SMA, QMA or alternative connector options. It is ideal for all wireless applications from cellular through UMTS.
Download Datasheet | Product Details
Sponsored by Signal Hound
 
 
 
RF Module
Dual-band Wi-Fi 4 and Bluetooth 5 Combo Modules for Industrial Applications

RF Module  from u-blox AG

The MAYA-W1 Series from u-blox are Dual-band Wi-Fi 4 and Bluetooth 5 Combo Modules that are designed specifically for industrial applications. These modules support the Wi-Fi 4 (802.11a/b/g/n) standard and deliver up to 150 Mbit/s data throughput. They also support both Bluetooth classic and Bluetooth Low Energy 5 standards.
Download Datasheet | Product Details
Cellular Module
LTE-A Cat 12 Module for Fixed Wireless Access and Industry 4.0 Applications

Cellular Module  from Fibocom

The FG101 from Fibocom is an LTE-A Cat 12 Module that is designed to provide high-speed connectivity in applications like FWA, intelligent security, industry 4.0, and connected cars. It is based on Qualcomm’s SDX12 chipset platform and provides an LTE throughput of 600 Mbps downlink and 150 Mbps uplink.
Download Datasheet | Product Details
RF Transistor
25 W Unmatched GaN Transistor from DC to 5 GHz

RF Transistor  from WAVEPIA

The WP2806025UH(S) from WAVEPIA is an Unmatched GaN HEMT that operates from DC to 5 GHz. It delivers a saturated output power of 25 W (45.4 dBm) with a gain of 17.4 dB and has a pulsed drain efficiency of 78.3%. The transistor has a pulse width of 100 µs and a duty cycle of 10%. It requires a supply of 28 V and consumes up to 30 mA of current.
Download Datasheet | Product Details
RF Transistor
6 W GaN Power Transistor from 30 to 4000 MHz

RF Transistor  from Tagore Technology

The TA9110K from Tagore Technology is a GaN Power Transistor that operates from 30 to 4000 MHz. It delivers a saturated output power of 6 W (~40 dBm) with a typical gain of 17 dB @ 1000 MHz and has a power-added efficiency of 55%. The transistor requires a DC supply of 28 - 32 V and dissipates up to 12 W of power. It is available in a 16-pin QFN package that measures 3.0 x 3.0 x 0.8 mm.
Download Datasheet | Product Details
RF Amplifier
10 W Asymmetric Doherty Power Amplifier from 3.70 to 3.98 GHz

RF Amplifier  from Wolfspeed, A Cree Company

The WS1A3940-V1 from Wolfspeed is an Asymmetric Doherty Power Amplifier Module (PAM) that operates from 3.70 to 3.98 GHz. It has been designed using GaN on SiC HEMT transistors with advanced matching and biasing networks on a multilayer laminate substrate with advanced heat-sinking technology. It provides an output power of 8 to 10 W with crest-factor reduced and digitally pre-distorted LTE and 5G NR signals with instantaneous bandwidths of up to 200 MHz.
Download Datasheet | Product Details
RF Amplifier
10.5 dB Gain Block from 0.05 to 5 GHz

RF Amplifier  from Guerrilla RF

The GRF2010 from Guerilla RF is a Broadband Gain Block that operates from 0.05 to 5 GHz. It provides a gain of 10.5 dB with a noise figure of 3.1 dB and has an output P1dB of 20.5 dBm. The amplifier uses a GaAs pHEMT process and exhibits outstanding broadband noise figure and linearity. It requires a supply voltage from 2.7 to 8 V and draws less than 100 mA of current.
Download Datasheet | Product Details
RF Module
2.4 GHz LoRa/LoRaWAN Transceiver for Long Range IoT Applications

RF Module  from Miromico

The FMLR-80-U-STL4E-4M from Miromico is a 2.4 GHz LoRa and LoRaWAN IoT transceiver module that delivers a data rate of up to 1.3 Mbps. The FMLR LoRa® and LoRaWAN® IoT modules enable wireless connectivity to devices, systems and sensors communicating with high data rates or over a long distance. It has 512 kB of flash memory, 160 kB of SRAM and 4Mbit external flash.
Download Datasheet | Product Details
RF Module
LoRa Module for Long-Range and Low-Power IoT Applications

RF Module  from Shenzhen RAKwireless Technology

The RAK4270 from RAKwireless is a LoRa Module for Long-Range and Low-Power IoT applications. It is based on the STM32L071 MCU and an SX1262 LoRa chip which supports 8 spreading factors (SF5 - SF12) and signal bandwidth that can be adjusted between 7.8 kHz to 500 kHz. The module delivers an output power of up to 22 dBm and has a receiver sensitivity of -138 dBm.
Download Datasheet | Product Details
SATCOM Amplifier System
Ka-Band Low Noise Amplifier from 17.7 to 20.2 GHz

SATCOM Amplifier System  from ACORDE

The ACLNA-Ka-E84-V1 from Acorde is a Low Noise Amplifier that operates from 17.7 to 20.2 GHz. It provides a gain of more than 50 dB with a noise figure of less than 1.6 dB and an output P1dB of over 20 dBm. The amplifier requires a DC supply of 12-28 V and consumes 200 mA of current. It is ideal for ground, SOTP, SOTM, maritime, and military communication systems.
Download Datasheet | Product Details
Base Station Antenna
4-Port Small Cell Sector Panel Antenna from 3.3 to 3.8 GHz

Base Station Antenna  from L-COM

The HG3515SDP4-065 from L-Com is a 4-port Small Cell Sector Panel Antenna that operates from 3.3 to 3.8 GHz. This ±45 Deg. Slant polarized antenna provides a gain of 15 dBi and has a VSWR of less than 2.1:1. It has a front-to-back ratio of 30 dB and provides port isolation of 30 dB. The antenna has a horizontal HPBW of 63 degrees and a vertical HPBW of 14 degrees.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]