1. everything RF
  2. RF Newsletters
more
PREV 15 October, 2014 NEXT

New RF & Microwave Products at the EuMW 2014

15 October 2014 - everything RF Newsletter
 
everything RF
Date: 15 October 2014
 
Sponsored by Mouser
 
 
 
New RF & Microwave Products at the EuMW
RF Switch
True DC RF Switch from 0 Hz to 8 GHz

RF Switch from Peregrine Semiconductor

The PE42020 is a True DC SPDT switch from Peregrine that operates from 0 Hz to 8 GHz. This true DC switch is poised to replace problematic mechanical relays and MEMS switches in the test and measurement market. It can handle up to 30 dBm of power at 0 Hz and 36 dBm of power at 8 GHz. The switch has high linearity with an IP3 of 63 dBm. It has a switching time 10 microsecond and a 15 microsecond settling time making it ideal for test and measurement applications.
 
Download Datasheet | Product Details
 
Transceiver
Single-Chip SiGe Transceiver Chipset for E-band Backhaul Applications from 71 to 76 GHz

Transceiver from Infineon Technologies

The BGT70 is a single chip SiGe Transceiver Chipset from Infineon that operates from 71 to 76 GHz. They have been developed for E-Band backhaul applications. The chip consists of a power amplifier, Low Noise Amplifier, Up- and Down-Convertor, Programmable Gain Amplifier (PGA), Voltage Controlled Oscillator components all on one SiGe chip.
 
Download Datasheet | Product Details
 
RF Transistor
RF Transistor 350 Watt LDMOS Transistor at 915 MHz for Microwave Ovens

RF Transistor from Freescale

The MHT1002N is a 915 MHz high power RF transistor from Freescale that has been developed for RF heating products. It has a 350 watt output with 63% power added efficiency and a gain of 20 dB. The transistor requires a 50 V supply and is available in a flanged plastic package.
 
Download Datasheet | Product Details
 
RF Amplifier
1820 to 1890 MHz GaN Amplifier for 4G/LTE Small Cell Applications

RF Amplifier from RFHIC

The RTH18007-10 is a GaN Hybrid Amplifier that has been developed for 4G/LTE Small Cell Applications. It has a high saturted power of 47 dBm and a high efficiency of over 40%. Integrated with an asymmetrical Doherty configuration, the RTH18007-10 is packaged in a very small form-factor 28 x 19 x 4.8mm on an AIN (aluminum nitride) board which provides excellent thermal dissipation.
 
Download Datasheet | Product Details
 
Fixed Attenuator
698 to 2700 MHz, 100 Watt Low PIM Fixed Attenuator (5 to 30 dB Configurations)

Fixed Attenuator from JFW Industries

The 50FLP-XXX-100 is a 100 Watt fixed attenuator that operates from 698 to 2700 MHz. It is available in multiple configurations from 5 to 30 dB (5, 6. 10, 20 and 30 dB). The Attenuator can handle up to 100 watts of average power and 1000 watts of peak power. It has a PIM of -165 dBc and is available in a module with N Type connectors and an integrated heat sink.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
Mouser
Mouser Ships New PLL with Greater RF Sensitivity and Radar Accuracy
Texas Instruments’ LMX2492 Fractional-N PLL offers the industry's best noise performance (-227dBc/Hz) for improved RF sensitivity, radar range and accuracy. The device also supports a 200MHz phase detector frequency, a 5V charge pump supply and 500MHz to 14GHz operating frequency range.
 
 
 
Variable Attenuator
18 GHz Variable Attenuator Line with 20 dB Attenuation handle up to 500 Watts

Variable Attenuator from Narda Microwave

Narda has a new Variable Attenuator line that has been developed for aerospace, defense and test applications. It is available in various frequency configurations from 1 GHz to 18 GHz. These units feature low minimum insertion loss, small size and an adjustable attenuation range of up to 30 db. The higher power units can handle power levels up to 500 Watts.
 
Download Datasheet | Product Details
 
RF Connector
50 GHz, 2.4mm and 2.92mm Compression-Mount Test Connectors

RF Connector from MOLEX

The Precision Test Connectors from MOLEX consist of 2.4 mm and 2.92 mm compression-mount test connectors. Designed with a vertical launch configuration and a unique compression-mount design, customers can create test points virtually anywhere on the PCB, enabling unparalleled design flexibility. The connectors achieve up to 50 GHz analog performance for high speed digital systems over 20 Gbps.
 
Download Datasheet | Product Details
 
Band Pass Filter
2 to 18 GHz Surface Mount Ceramic Bandpass Filters

Band Pass Filter from knowles

This series of surface mount ceramic bandpass filters from Knowles operate from 2 to 18 GHz. They are ideal for C, X and Ku Band Applications as well as for use in SATCOM, radar and military applications. The filters have been designed for use on PCB 8-12 mils thich with a permittivity of 3-3.8.
 
Download Datasheet | Product Details
 
Power Sensor
Extremely Fast USB Power Sensors with Wide Dynamic Range up to 33 GHz

Power Sensor from Keysight Technologies

The U2040 X-Series wide dynamic range USB power sensors from Keysight Technologies have been designed for wireless and radar applications, and a dedicated LAN model for satellite testing. They are available in 6 GHz, 18 GHz and 33 GHz frequency configurations with a wide dynamic range from -70 to 26 dBm. These power sensors have a measurement speed of up to 10,000 readings per second.
 
Download Datasheet | Product Details
 
PXI Signal Analyzer
PXI Vector Signal and Spectrum Analyzer up to 26.5 GHz

PXI Signal Analyzer from National Instruments

The PXIe-5668R is a vector signal analyser (VSA) that operates from 20 Hz to 14/26.6 GHz. It has a 765 MHz bandwidth with a -165 dBc/Hz noise floor at 1 GHz and a -129 dBc/Hz phase noise at a 10 kHz offset. This PXI VSA and spectrum analyser meets the challenging requirements of applications such as wireless communications, radio frequency integrated circuit (RFIC) characterization, RADAR test, and spectrum monitoring/signal intelligence.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
RF Spectrum Analyzer 9 kHz to 7.5 GHz Compact & Light Weight Spectrum Analyzer

RF Spectrum Analyzer from RIGOL Technologies

The DSA800 Series of spectrum analyzers from RIGOL operate from 9 kHz to 7.5 GHz. The analyzers have a DANL of -161 dBm and a phase noise of less than -98 dBc/Hz with a resolution bandwidth of 10 Hz. The DSA800 Series has multiple interface options LAN (LXI), USB Host & Device, GPIB and is available in a compact , light weight form factor.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
2 to 40 GHz Compact Spectrum Analyzer for Microwave Radio Links

RF Spectrum Analyzer from SAF Tehnika

The Spectrum Compact is a series of handheld spectrum analyzers from SAF that operate from 2 to 40 GHz to cover most licensed microwave frequency bands. It has been developed for microwave radio engineers and network engineers to enable equipment installation, link troubleshooting and site planning. It has an intuitive touch screen display which can be used when wearing gloves.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
4/8/14/20/30/40 GHz High Performance Economy Vector Network Analyzers

Vector Network Analyzer from Anritsu

The MS46322A is a series of Economy ShockLine™ Vector Network Analyzers that are available in 4/8/14/20/30/40 GHz frequency configurations. These analyzers are based on patented shock line VNA-on-chip technology, which simplifies the internal VNA architecture at high frequencies, reduces instrument cost, and enhances accuracy and measurement repeatability.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
67 GHz, Signal and Spectrum Analyzer Series with 500 MHz Analysis Bandwidth

RF Spectrum Analyzer from Rohde & Schwarz

The R&S FSW series from Rohde & Schwarz is a portable signal and spectrum analyzer which operates from 2 Hz to up to 67 GHz (8/13.6/26.5/43.5/50/67 GHz Configurations available). It has a phase noise of -137 dB, a dynamic range of -88 dBc and an analysis bandwidth up to 500 MHz.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
9 kHz to 8.5 GHz Vector Network Analyzer for Mobile Radio & Wireless Applications with 4, 8, 12, 16, 24 Test Ports

Vector Network Analyzer from Rohde & Schwarz

The R&S ZNBT is a vector network analyzer that enables users to characterize devices under test with multiple test ports (Up to 24 ports) and enables production lines to maintain high throughput by measuring multiple DUTs in parallel. It operates from 9 kHz to 8.5 GHz and provides the high RF performance of a two-port network analyzer at each of its test ports.
 
Download Datasheet | Product Details
 
PXI RF Vector Network Analyzer
PXI RF Vector Network Analyzer 2 Port PXI Vector Network Analyzer from 300 kHz to 26.5 GHz

PXI RF Vector Network Analyzer from Keysight Technologies

The M937xA Series from Keysight Technologies is a PXI Vector Network Analyzer that is available in options from 4 GHz to 26.5 GHz. The analyzers offer high performance on key specifications such as speed, trace noise, stability and dynamic range which enable it to perform fast, accurate measurements and reduce the cost-of-test by enabling simultaneous characterization of many devices – two-port or multi-port – using a single PXI chassis.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.