PREV 7 April, 2021 NEXT

New RF and Microwave Products this Week

7 April, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 7 April, 2021
 
Sponsored by NEL Frequency Controls
 
 
 
Featured Products this Week
Microwave Generator
800 W GaN SSPA Microwave Generator from 5725 to 5815 MHz

Microwave Generator  from RFHIC

The RIF58800-20SG from RFHIC is a GaN SSPA based Microwave Generator that operates from 5725 to 5815 MHz. It provides a CW peak power of up to 800 W with a power control resolution of 10 W and has power stability of up to 1 %. The generator has a phase adjustment range of 180 degrees and a phase control resolution of 10 degrees.
Download Datasheet | Product Details
Power Divider
3-Way Power Splitter/Combiner from 24 to 44 GHz

Power Divider  from Mini Circuits

The ZC3PD-V24443+ from Mini-Circuits is a 3-Way Power Divider that operates from 24 to 44 GHz. It can handle up to 9 W of input power as a splitter and has an insertion loss of less than 2.2 dB. This splitter/combiner has a VSWR of less than 1.7:1 and provides isolation of 32 dB. It is ideal for use in fixed Ka-band satellites, space research, and test accessory applications.
Download Datasheet | Product Details
RF Surge Protector
Low PIM Quarter Wave Surge Protector from 555 MHz to 4 GHz

RF Surge Protector  from PolyPhaser

The QWP-43M43F-ER from PolyPhaser is a Low PIM, Quarter Wave Surge Protector that operates from 555 MHz to 4 GHz. It can handle an input power of up to 200 W and surge current of up to 50 kA. This surge protector has an insertion loss of less than 0.1 dB and a passive intermodulation (PIM) of below 160 dBc.
Download Datasheet | Product Details
Vector Network Analyzer
1-Port USB Vector Network Analyzer from 1 MHz to 18 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The R180 from CMT is a handheld 1-Port VNA that provides lab-grade performance from 1 MHz to 18 GHz. This 1-Port VNA (Cable and Antenna Analyzer) can connect directly to the DUT, as a result of which it has excellent measurement accuracy by eliminating the practical limitation of test cables. The R180 can be controlled and powered through a USB-C port or through an external 5 VDC power supply.
Download Datasheet | Product Details
Antenna
Off-the-Shelf Chip Antenna for Cellular, IoT, Wi-Fi 6E and GNSS Applications

Antenna  from ignion

The TRIO mXTEND™ (NN03-310) from ignion is a 3-Port Chip Antenna that operates from 698 to 8000 MHz. This off-the-shelf, antenna covers cellular (2G/3G/4G/5G) / ISM and NB-IoT/LTE-M bands with additional GNSS, Bluetooth, Wi-Fi 6E, and UWB connectivity simultaneously. The antenna is linearly polarized and delivers a peak gain of 3.8 dBi and has an efficiency of over 55 % (LTE + 5G bands).
Download Datasheet | Product Details
Rubidium Oscillator
10 MHz Rubidium Oscillator for Airborne Applications

Rubidium Oscillator  from Orolia

The Spectratime LPFRS/AV1 from Orolia is a high-performance 10 MHz Rubidium Oscillator designed for rugged airborne applications. It has an excellent frequency retrace of ±0.05 ppb and very low-temperature sensitivity. The oscillator provides a sine wave output with a phase noise of -140 dBc/Hz @ 10 kHz offset. It has spurious levels of under -80 dBc and harmonics of better than -25 dBc. This oscillator complies to stringent vibration and shock standards.
Download Datasheet | Product Details
Sponsored by NEL Frequency Controls
OCXO
100 MHz Ultra Low Phase Noise OCXO in 14x21x7.5 mm SMD Package
This 100 MHz OCXO provides ultra low phase noise of -105 dBc/Hz at 10 Hz, -135 dBc/Hz at 100 Hz, -162 dBc/Hz at 1 kHz, and -175dBc/Hz at 10 kHz offset. Miniaturized, Surface Mount Package. Ideal for use with Synthesizers, Instrumentation, and Microwave/ RF applications. View Specifications.
 
RF Amplifier
20 W GaN MMIC Power Amplifier from 9 to 10 GHz

RF Amplifier  from Wolfspeed, A Cree Company

The CMPA901A020S from Wolfspeed is a GaN MMIC Power Amplifier that operates from 9 to 10 GHz. It has been developed for pulsed radar applications and delivers a saturated output power of more than 20 W with a gain of over 30 dB. The amplifier is suitable for use in X-band pulsed radars, marine weather radars, and military radars.
Download Datasheet | Product Details
RF Transistor
280 W GaN HEMT from 1.03 to 1.09 GHz

RF Transistor  from WAVEPIA

The WP481P06200MH from WAVEPIA is a GaN High Electron Mobility Transistor (HEMT) that operates from 1.03 to 1.09 GHz. It delivers a saturated output power of 54.53 dBm (~283 W) with a gain of 17.53 dB and has a drain efficiency of 62.76%. The transistor requires a DC supply of 48 V. It is available in a surface-mount or screw-hole package and is suitable for use in broadband amplifiers, cellular infrastructure, test instrumentation, and radar applications.
Download Datasheet | Product Details
GNSS Module
Triple-Frequency, Multi-Constellation GNSS Receiver OEM Board

GNSS Module  from Septentrio

The AsteRx-m3 Pro+ from Septentrio is a multi-frequency, multi-constellation GNSS OEM receiver board for Machine Control, Automation, and Robotics Applications. This triple-frequency multi-constellation GNSS receiver supports GPS, GLONASS, BeiDou, Galileo, QZSS, NavIC, SBAS: EGNOS, WAAS, GAGAN, MSAS, and SDCM. It can be used either as a base station or a rover receiver (RTK).
Download Datasheet | Product Details
RF Switch
SPDT Reflective Switch from DC to 14 GHz

RF Switch  from Atlanta Micro

The AM6002A from Atlanta Micro is an SPDT Reflective Switch that operates from DC to 14 GHz. It can handle an input power of up to 24 dBm and has a switching speed of 100 ns. The switch has an insertion loss of less than 2 dB and provides isolation of 30 dB. It requires a single positive supply of 4.5-5.2 V, a single positive control voltage to switch paths, and consumes less than 0.6 mA of current.
Download Datasheet | Product Details
RF Cable Assembly
8-Port SMPS to 2.92 mm Cable Assembly

RF Cable Assembly  from SV Microwave

The 7038-0211 from SV Microwave is an 8-Port RF Cable Assembly that operates up to 67 GHz. Each cable is 6 inches in length and has 8x SMPS Female connectors at one end and 8x 2.92 mm (Male) connectors at the other end. The cable assembly has passivated stainless steel mounting screws and allows easy mating-de-mating with thumbscrews.
Download Datasheet | Product Details
Frequency Synthesizer
10 MHz to 20 GHz RF Synthesizer Module

Frequency Synthesizer  from Holzworth Instrumentation

The HSM18001B from Holzworth Instrumentation is an RF synthesizer module that operates from 10 MHz to 20 GHz. This microwave CW source is architected on a non-PLL-based platform. The digital-analog hybrid design provides excellent phase noise performance and spurious response, which compliment the phase coherent nature of these digital-analog hybrid signal sources.
Download Datasheet | Product Details
Sponsored by NEL Frequency Controls
 
 
 
RF Amplifier
Broadband Amplifier from 0.1 to 18 GHz

RF Amplifier  from Mercury Systems

The AML0118P3201 from Mercury Systems is a Broadband Amplifier that operates from 0.1 to 18 GHz. It provides a P1dB of 26 dBm with a gain of 32 dB and has a noise figure of less than 3.5 dB. The amplifier requires a DC supply of 15 V and consumes less than 750 mA of current. It is available in a module with SMA Female connectors.
Download Datasheet | Product Details
RF Amplifier
400 W Solid-State Power Amplifier from 8 to 12 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP4022A-LC from Exodus Advanced Communications is a Solid-State Power Amplifier (SSPA) that operates from 8 to 12 GHz. It delivers an output power of more than 400 W with over 56 dB of gain. The amplifier has spurious levels of less than -60 dBc and harmonics of better than -20 dBc. It has built-in protection circuits with extensive monitoring that includes forward/reflected power monitoring, VSWR, voltage / current / temperature sensing for excellent reliability and ruggedness.
Download Datasheet | Product Details
RF Amplifier
23 dB Cryogenic Amplifier from 1 to 18 GHz

RF Amplifier  from AmpliTech

The APTC4-01001800-1900-D4 from AmpliTech is a Cryogenic Amplifier that operates from 1 to 18 GHz. It provides a gain of more than 23 dB with a noise figure of less than 2.5 dB and an output P1dB of +8 dBm. The amplifier requires a DC supply of 9 V and consumes 150 mA of current.
Download Datasheet | Product Details
RF & Microwave Circulator
10 W Coaxial Circulator from 700 to 800 MHz

RF & Microwave Circulator  from Renaissance Electronics Corporation

The 3A2NJM from Renaissance is a UHF-Band Coaxial Circulator that operates from 700 to 800 MHz. It can handle up to 10 W of CW power and has a VSWR of less than 1.29:1. The circulator has an insertion loss of less than 0.5 dB and provides isolation of 18 dB. This UHF-band circulator can operate over a wide temperature range while maintaining a low insertion loss and is suitable for LTE applications.
Download Datasheet | Product Details
RF Shielded Test Enclosure
RF Shielded Test Enclosure from 20 MHz to 6 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-2349 from RF Electronics is an RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. This shielded box has a single chamber design that allows parallel testing of multiple DUTs. The interior of this enclosure measures  1100 mm (W) X 800 mm (H) X 490 (D). It has thick RF absorbing foam that provides over 120 dB of isolation @ 3 GHz.
Download Datasheet | Product Details
RF Over Fiber Module
RF over Fiber Link Pair from 10 MHz to 6 GHz

RF Over Fiber Module  from Vialite Communications

The Mil-Aero Link Pair from Vialite is an RF over Fiber Link Pair that operates from 10 MHz to 6 GHz. It is designed for use in Mil-Aero applications such as Boresight communications (for both transmit and receive), Telemetry, Tracking and Control (TT&C), and Signal Intelligence gathering (SIGINT). The RF over fiber link can operate at distances of up to 50 Km.
Download Datasheet | Product Details
Cellular IoT Module
Power-efficient LTE UE Cat M1/NB2 Modules for IoT Applications

Cellular IoT Module  from Telit Communications

The ML865G1 Series from Telit are LTE UE Cat M1/NB2 modules that have been designed for IoT applications offering optimized power consumption and enhanced coverage. They have a maximum downlink data rate of 588 Kbps and an uplink data rate of up to 1 Mbps. The ML865G1 series require a DC supply of 3.8 V and can be controlled via USB 2.0, UART, SPI, I2C, GPIO, ADC, and SIM interfaces.
Download Datasheet | Product Details
Block Up Converter
Ka-Band GaN SSPA+BUC from 27.5 to 30 GHz for Airborne Applications

Block Up Converter  from Comtech Xicom Technology

The Falcon 40Ka from Comtech Xicom Technology is a Ka-band SSPA+BUC that up-converts an input frequency from 950 - 1950 MHz to an output frequency from 27.5 - 30.0 GHz (1 GHz selectable). It delivers a saturated output power of 40 W with a gain of 70 dB and phase noise of -103 dBc/Hz @ 1 MHz offset. This lightweight and efficient BUC is based on a high efficiency GaN solid-state design that enables delivering high power in the toughest environments.
Download Datasheet | Product Details
Antenna
SISO DAS Antenna from 617-960/1695-2690/3300-4200 MHz

Antenna  from Galtronics USA, Inc

The HyperFlat™ GI0801-07361 from Galtronics is a SISO DAS Antenna that operates from 617-960, 1695-2690, and 3300-4200 MHz. This horizontally polarized antenna provides a gain of up to 6.4 dBi and has a VSWR of less than 1.93:1. It has an omnidirectional radiation pattern and is ideal for applications requiring ceiling-mounted Omni antennas. The antenna can handle an input power of 50 W.
Download Datasheet | Product Details
Base Station Antenna
12-Port Sector Antenna from 790-960/1710-2690 MHz

Base Station Antenna  from GAMMA NU, INC

The EE4O1515X65V10D12 from Gamma NU is a 12-Port Hex-Band Sector Antenna that operates from 790 to 960 MHz (Lower band) and 1710 to 2690 MHz (Higher band). It has 4 ports for the lower bands and 8 ports for the higher bands. This ±45° polarized antenna provides a gain of up to 16.5 dBi and has a VSWR of less than 1.5:1. It has a horizontal beamwidth of more than 60° and a vertical beamwidth of above 10°.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, upcoming events, articles, white papers, events and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]