1. everything RF
  2. RF Newsletters
more
PREV 16 June, 2021 NEXT

New RF and Microwave Products this Week

16 June, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 16 June, 2021
 
Sponsored by Mouser
 
 
 
New RF and Microwave Products this Week
Gain Equalizer
Absorptive Gain Equalizer from DC to 28 GHz

Gain Equalizer  from Mini Circuits

The EQY-6-283+ from Mini-Circuits is a Gain Equalizer that operates from DC to 28 GHz. It has a nominal attenuation slope of 6 dB and can handle an input power of up to 30 dBm. The equalizer is useful for compensating the negative gain slope of amplifiers, receivers, transmitters to achieve flat gain versus frequency. It can be used in cellular infrastructure, 5G, wideband communications, test instrumentation, and defense applications.
Download Datasheet | Product Details
Power Divider
16-Way Power Divider/Combiner from 700 to 7250 MHz

Power Divider  from Vaunix

The LPD-752-16 of Lab Brick® Series from Vaunix is a 16-Way Power Divider/Combiner that operates from 700 to 7250 MHz. It can handle up to 20 W of input power as a power divider and 0.2 W of input power as a combiner. The divider has an insertion loss of less than 4.5 dB and provides over 20 dB of isolation. It has an amplitude balance of ±0.9 dB and a phase balance of ±10°.
Download Datasheet | Product Details
GPS/GNSS Disciplined Oscillator
10 MHz Rubidium Clock with an Integrated GNSS Receiver

GPS/GNSS Disciplined Oscillator  from Orolia

The Spectratime GRClok-1500 from Orolia is a smart, low-cost, compact rubidium oscillator with an optional integrated GPS / GNSS receiver. This 10 MHz Rubidium oscillator is based on the patented, adaptive SmarTiming+ technology that disciplines the GPS/GNSS reference at 1 ns resolution. It provides a host of complex time & frequency features in a single package.
Download Datasheet | Product Details
Switched Filter Bank
8-Channel Amplified Switch Filter Bank from DC to 8000 MHz

Switched Filter Bank  from Lexatys

The 350-02874-0001 from Lexatys is an Amplified Switch Filter Bank that operates from DC to 8000 MHz. It consists of an amplifier, 8 filtered channels, a bypass channel, and a default safety load channel. Each of the 8 channels and the bypass channel can be selected to have a through-path, an amplified path, or an attenuated path which can be enabled as desired.
Download Datasheet | Product Details
RF Transceiver
6.5 and 8 GHz Ultra-Wideband (UWB) Transceiver IC

RF Transceiver  from Qorvo

The DW3210 from Qorvo is an Ultra-Wideband (UWB) Transceiver IC that operates in the UWB Channels 5 (6.5 GHz) and 9 (8 GHz). This UWB IC is interoperable with the Apple U1 chip. It delivers a data rate of up to 6.8 Mbps and has a ranging accuracy of 10 cm. It requires a DC supply of 2.4-3.6 V and is suitable for coin cell applications.
Download Datasheet | Product Details
RF Inductor
Ceramic Wirewound Chip Inductors from 0.8 to 120 nH

RF Inductor  from Coilcraft

The 0402DC Series (1005) from Coilcraft are Ceramic Wirewound Chip Inductors that offer 112 inductance values from 0.8 nH to 120 nH. They have a Q factor that is 40% higher and a DCR that is 45% lower than other similar size inductors. These inductors have a high self-resonance frequency (SRF) of up to 28.8 GHz. They are AEC-Q200 Grade 1 qualified with an operating temperature range from –40°C to +125°C and exhibit super low loss in high-frequency circuits.
Download Datasheet | Product Details
Sponsored by Mouser
Xilinx
Xilinx Programmable Single-Chip Adapatable Radio Platform
In this eBook Xilinx and Mouser introduce the Zynq UltraScale+ RFSoC, the industry’s only single-chip adaptable radio platform now extended to full Sub-6GHz support. These RFSoCs integrate RF data converters into an all SoC architecture. Click here to learn more.
 
RF Cable Assembly
1.85 mm Phase Stable Cable Assembly Operates up to 70 GHz

RF Cable Assembly  from Jyebao

The 18301830-PT2-70G#1 from Jyebao is a phase and amplitude stable VNA cable assembly that can operate at up to 70 GHz. It has amplitude stability of ±0.05 dB, phase stability of ±5° and has a VSWR of less than 1.35:1. The cable has a propagation velocity of 70%. It has 1.85mm Plug/Male connectors on either end and is available in custom lengths.
Download Datasheet | Product Details
Software
3D EM Simulation Software for High-Fidelity Computations

Software  from Remcom

XFdtd is a full wave 3D EM solver that simplifies the analysis of complex EM problems and leads the market in FDTD-based modeling and simulation. With unrivaled speed, XF is the leader for complex, high-fidelity EM simulations. Applications include microwave devices such as waveguides, power dividers, and filters; antenna design and placement; EMI/EMC testing; static discharge; signal integrity; SAR validation; radar and scattering; and photonics.
Download Datasheet | Product Details
RF Amplifier
90 W GaN Power Amplifier MMIC from 12.75 to 13.25 GHz

RF Amplifier  from Wolfspeed, A Cree Company

The CMPA1C1D080F from Wolfspeed is a GaN Power Amplifier MMIC that operates from 12.75 to 13.25 GHz. It delivers a saturated output power of 90 W with a gain of 25 dB and a Power Added Efficiency (PAE) of more than 21%. The amplifier utilizes Cree’s high performance, 0.25um GaN on SiC production process. It requires a DC supply of 40 V and has 3rd-order intermodulation of -30 dBc at 20 W of total output power. This amplifier has been developed for SATCOM uplink applications.
Download Datasheet | Product Details
Fixed Attenuator
10 W Fixed Attenuators from DC to 4 GHz

Fixed Attenuator  from JFW Industries

The 50FHC-XXX-10-N from JFW Industries are Fixed Attenuators that operate from DC to 4 GHz. They are available in attenuation values from 1 to 60 dB and can handle up to 10 W of input power. These 50-ohm attenuators have an integrated heat sink and are available with BNC, N, RP-TNC, SMA, TNC, 4.1/9.5, 4.3/10, and 7/16 connectors.
Download Datasheet | Product Details
Phase Noise Analyzer
10 MHz to 6 GHz (Optional to 24 GHz) Real-Time Phase Noise Analyzer

Phase Noise Analyzer  from Holzworth Instrumentation

The HA7062C from Holzworth is a real time fully integrated phase noise analysis system that operates from 10 MHz to 6 GHz. It utilizes the same core engine from the HA7402C analyzer along with a pair of high performance RF Synthesizers as the test signal LOs. The stability of the agile synthesizers operating as LO sources for the high speed, cross-correlation core enables an extremely reliable phase noise analyzer.
Download Datasheet | Product Details
RF Test Set
Compact 5G mmWave RF Test System

RF Test Set  from Rohde & Schwarz

The R&S®CMPQ from Rohde & Schwarz is a fully integrated solution for 5G mmWave RF testing. It is based on the R&S®CMP200 radio communication tester in combination with the R&S®CMPHEAD30 remote radio head (RRH) and the R&S®CMQ200 shielding cube. This test set enables the testing of 5G NR use cases in non-standalone (NSA) mode for FR1 and FR2 frequency bands.
Download Datasheet | Product Details
Sponsored by Mouser
 
 
 
Multiplexer
16-Channel SP4T LXI Microwave Multiplexer from DC to 67 GHz

Multiplexer  from Pickering Interfaces

The 60-803-816 from Pickering Interfaces is a 4-to-1 SP4T Microwave Multiplexer with up to 16 independent banks. This multiplexer has an LXI interface and is suitable for switching 50 ohm signals up to 67 GHz. The multiplexer is available in 18/26.5/40/50/67 GHz frequency options and is also available in a terminated version with up to 14 banks of 4 channel multiplexers.
Download Datasheet | Product Details
Beamforming IC
8-Channel Beamformer IC from 26.5 to 29.5 GHz for mmWave 5G

Beamforming IC  from Renesas

The F5288 from Renesas is an 8-Channel Half-Duplex Tx/Rx Beamformer IC for 5G phased-array applications in the n257 band (26.5 to 29.5 GHz). It provides highly flexible gain and phase control on each channel to achieve fine beam steering and gain compensation between radiating channels. The F5288 provides more than 15.5 dBm linear output power for wide-band 5G-NR waveforms.
Download Datasheet | Product Details
RF Module
2.4 GHz 802.11 b/g/n Embedded Wi-Fi Module

RF Module  from Panasonic Corporation

The PAN9520 from Panasonic is a 2.4 GHz Wi-Fi (802.11 b/g/n) embedded module that is based on the Espressif ESP32-S2 chipset. It has an integrated chip antenna and QSPI memory that enable the module to be used in a variety of stand-alone or host-controlled applications. It has a Tx power of 19.5 dBm and has an Rx sensitivity of -97 dBm.
Download Datasheet | Product Details
RF Module
2.4/5 GHz Wi-Fi 6 + Bluetooth 5.1 Module

RF Module  from Laird Connectivity

The Sterling 70 Series from Laird Connectivity are 2.4/5 GHz Dual-Band Wi-Fi (802.11a/b/g/n/ac/ax) and Bluetooth 5.1 modules that are designed for industrial IoT connectivity. They are powered by the NXP 88W9098 wireless SoC and deliver data rates of up to 1.2 Gbps for WLAN. The modules have an integrated power amplifier and Low Noise Amplifier with a 2x2 MU-MIMO radio.
Download Datasheet | Product Details
Wireless SoC
Dual-Band Wi-Fi 6 + Bluetooth 5.1 Wireless SoC

Wireless SoC  from NXP Semiconductors

The 88W9098 from NXP Semiconductors is a 2.4/5 GHz wireless SoC that is based on the latest IEEE 802.11ax standard and implements an innovative concurrent dual Wi-Fi and dual-mode Bluetooth 5.1 architecture. The SoC provides gigabit-level Wi-Fi performance, superior reliability, and enhanced security to enable high-performance, flexible solutions for the IoT, Access, and Industrial markets.
Download Datasheet | Product Details
Antenna/OTA Test System
Anechoic Test Chamber for Radar, mmWave, and 5G NR OTA Measurements

Antenna/OTA Test System  from mmWave Test Solutions (mmWaveTest)

The AC888 from mmWave Test Solutions is an Antenna Test Chamber for radar, mmWave, and 5G NR Over-The-Air (OTA) measurements up to 110 GHz. It can be placed horizontally or vertically making it ideal for small labs or for customers who need to place multiple chambers side by side. The chamber has a tip-to-tip distance between the absorbers of 157 cm (length) and 55 cm (height and width).
Download Datasheet | Product Details
Antenna Positioner
USB-Controlled 3-Axis mmWave and THz Antenna Positioner

Antenna Positioner  from Milliwave Silicon Solutions

The GIM04 from MilliBox is a 3-Axis mmWave and THz Antenna Antenna Positioner which can control the rotation in Elevation, Azimuth, and Polarization axes. It can adjust to various DUT form factors and adds a new level of versatility for daily over-the-air measurements. It has a 20 W base motor with a step resolution of 0.002°.
Download Datasheet | Product Details
Antenna
Low Profile 4x4 MIMO Antenna from 694 to 4000 MHz

Antenna  from Spinner Group

The A77670 from Spinner Group is a 4-Port 4x4 MIMO Antenna that operates from 694 to 4000 MHz. This horizontally polarized antenna provides a gain of more than 3 dBi and has a VSWR of less than 1.8:1. It has a horizontal beamwidth of 360° and a vertical beamwidth of 45 to 90°. The antenna can handle an input power of up to 50 W (per port) and has intermodulation (IM3) of less than -153 dBc.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]