1. everything RF
  2. RF Newsletters
more
PREV 30 June, 2021 NEXT

New RF and Microwave Products this Week

30 June, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 30 June, 2021
 
Sponsored by PCB Directory
 
 
 
New RF and Microwave Products this Week
Frequency Multiplier
4x Frequency Multiplier from 16 to 42 GHz

Frequency Multiplier  from Quantum Microwave

The QMC-MX4K-F1841 from Quantum Microwave is a 4x Frequency Multiplier that upconverts an input frequency from 4-10.5 GHz to an output frequency from 16-42 GHz. It delivers an output power of 20 dBm with harmonics of under -15 dBc. The multiplier requires a DC supply of 8-10 V and consumes less than 550 mA of current.
Download Datasheet | Product Details
RF Amplifier
7 W LDMOS Doherty Power Amplifier from 3.4 to 3.65 GHz

RF Amplifier  from NXP Semiconductors

The A3M35TL039 from NXP Semiconductors is a Doherty Power Amplifier that operates from 3400 to 3650 MHz. It has been designed for wireless infrastructure applications that demand high performance in a small footprint. The amplifier delivers an average output power of 7 W with a gain of 28.8 dB and has a PAE of up to 40.8%. It has DC-blocking and is impedance matched to 50 ohms.
Download Datasheet | Product Details
RF Amplifier
4 W High-Efficiency Power Amplifier from 925 to 960 MHz

RF Amplifier  from Qorvo

The QPA9908 from Qorvo is a high-efficiency Power Amplifier that operates from 925 to 960 MHz. It delivers a P3dB of 4 W (35.5 dBm) while maintaining a PAE of 36% at an average power of 28 dBm with 33 dB of gain. The amplifier requires a DC supply from 4.75 to 5.25 V and consumes 350 mA of current.
Download Datasheet | Product Details
RF Amplifier
1 W Power Amplifier from 3550 to 4200 MHz for 5G Applications

RF Amplifier  from Skyworks Solutions

The SKY66523-11 from Skyworks is a High-Efficiency Power Amplifier that operates from 3550 to 4200 MHz. It delivers an output power of 30 dBm (1 W) with a gain of 33 dB. The amplifier has integrated active biasing circuitry to compensate PA performance over temperature, voltage, and process variations. It is available in a 16-pin package that measures 5 x 5 mm.
Download Datasheet | Product Details
RF Spectrum Recording and Playback System
Real-Time Spectrum Analysis RF Record and Playback System

RF Spectrum Recording and Playback System  from TEVET

The LibertyGT from TEVET is a Real-Time Spectrum Analysis (RTSA) RF record and playback system that is available in multiple frequency options of 6, 14, 18, 26.5, and 40 GHz. It features up to 16 synchronized channels and supports bandwidths from 50 MHz to 1 GHz. The real-time, signal-based nature of the system allows it to acquire, analyze, and present results for unique measurements exponentially faster than traditional testing methods.
Download Datasheet | Product Details
RF Variable Attenuator
10-Channel Programmable RF Attenuator from 50 to 8000 MHz

RF Variable Attenuator  from Adaura Technologies

The AD-USB10AR38G95 from Adaura Technologies is a 10-Channel Programmable RF Attenuator that operates from 50 to 8000 MHz (Wi-Fi 6E). It has an attenuation range from 0 to 95 dB with a step size of 0.25 dB and an accuracy of ± 0.75 (50-2000 MHz). The attenuator has an insertion loss of less than 10.9 dB and provides interchain isolation of over 110 dB.
Download Datasheet | Product Details
Signal Generator
RF Signal Generator from 150 kHz to 2 GHz

Signal Generator  from Aim-TTi

The TGR2050 from Aim-TTi is an RF Signal Generator that operates from 150 kHz to 2 GHz. It can generate a signal with output power from -127 to +7 dBm in 0.1 dBm increments (amplitude entry in dBm or µV/mV). The generator offers AM, FM, and Phase modulation using an internal or external 10 MHz source. It has frequency stability of ±1ppm and phase noise of -116dBc/Hz at 25kHz offset, 500 MHz carrier.
Download Datasheet | Product Details
RF High Pass Filter
Suspended Substrate High Pass Filter with Passband from 17.5 to 41 GHz

RF High Pass Filter  from ERZIA

The ERZ-HPF-1750-4100-2.0 from ERZIA is a High Pass RF Filter with a passband from 17.5 to 41.0 GHz. It has an insertion loss of less than 2 dB and rejection of 30 dB @16.05 GHz / 60 dB @15.4 GHz. The filter is based on the Suspended Substrate (SS) technology that allows high selectivity with sharp edges within an optimized physical space. It can also be developed with lumped elements or microstrips for more complex RF filtering applications.
Download Datasheet | Product Details
RF Amplifier
15 W GaN MMIC Amplifier from 12.5 to 14.5 GHz

RF Amplifier  from Nxbeam Inc

The NPA1020-DE from Nxbeam is a GaN MMIC Amplifier that operates from 12.5 to 14.5 GHz. It delivers a saturated output power of 15 W with a linear gain of 25 dB and has a power-added-efficiency (PAE) of more than 40%. The amplifier is fabricated using 0.2 µm GaN HEMT on SiC technology. It requires a drain voltage from 20 to 28 V and draws a drain current of less than 1.3 A.
Download Datasheet | Product Details
RF Amplifier
630 W Solid-State GaN Power Amplifier for Synthetic Aperture Radar Applications

RF Amplifier  from CTT Inc

The AGN/099-5860-P from CTT is a GaN-based SSPA that operates from 9.4 to 9.9 GHz. The amplifier provides 630 W of pulsed output power with a gain of 60 dB. It is available in a module that measures 6.17 x 6.35 x 0.82 inches and is ideal for multifunctional low earth orbit (LEO) small satellites (SmallSat) and airborne synthetic aperture radar (SAR) system applications.
Download Datasheet | Product Details
RF Amplifier
Cryogenic Low Noise Amplifier from 0.1 to 6 GHz

RF Amplifier  from AmpliTech

The APTC3-00100600-1000-D4 from AmpliTech is a Cryogenic Low Noise Amplifier that operates from 0.1 to 6 GHz. It provides a gain of 28 dB with a noise figure of less than 1 dB. The amplifier is available in a drop-in package with SMA female connectors.
Download Datasheet | Product Details
RF Test Set
5G Radio Communication Tester for FR1 and FR2 Frequency Bands

RF Test Set  from Rohde & Schwarz

The R&S®CMX500 from Rohde & Schwarz is a 5G NR Radio Communication Tester for the FR1 and FR2 frequency bands. It can handle all signaling use cases for mobile communication devices, from early R&D to final integration, verification and performance tests, final product validation in a test house, quality assurance, and repair.
Download Datasheet | Product Details
RF Test Set
Ultra-Wide Band RF Test Set from 5 to 19 GHz

RF Test Set  from LitePoint

The IQgig-UWB from Litepoint is a one-box test solution for complete physical-layer testing and calibration of devices based on UWB technology and IEEE 802.15.4z. Operating from 5 to 19 GHz, the integrated Vector Signal Generator (VSG) and Vector Signal Analyzer (VSA) enable comprehensive transmitter and receiver testing with over 500 MHz of single-shot bandwidth.
Download Datasheet | Product Details
Termination
1 W RF Termination from DC to 40 GHz

Termination  from MECA

The 468-2 from MECA is an RF Termination that operates from DC to 40 GHz. It can handle an average power of up to 1 W and peak power of 250 W (pulse width of 5 µSec, duty cycle of 0.05%). This 50-ohm termination has a VSWR of less than 1.2:1. It is available in a module with 2.92 mm-Female connectors.
Download Datasheet | Product Details
Power Divider
4-Way Power Divider from 0.698 to 2.7 GHz

Power Divider  from VidaRF

The VPD-0627A4 from VidaRF is a 4 Way Power Divider that operates from 0.698 to 2.7 GHz. This power divider can handle up to 30 watts of power, has a low insertion loss of 1.2 dB and high isolation of over 20 dB. It has a low amplitude balance of 0.3 dB and phase balance of 5 degrees. The power divider is available in a module with SMA female connectors.
Download Datasheet | Product Details
Sponsored by EMC Directory
 
 
 
Cellular IoT Module
4G LTE-M/NB-IoT LPWA Module for Global Industrial IoT Applications

Cellular IoT Module  from Sierra Wireless

The HL7810 from Sierra Wireless is a 4G LTE-M and NB-IoT LPWA Module that is designed for Global Industrial IoT applications. It has a download data rate of 590 Kbps (Cat-M1), 127 Kbps (Cat-NB2), and an upload data rate of 1100 Kbps (Cat-M1), 158 Kbps (Cat-NB2). The module delivers a Tx power of 23 dBm and has excellent power efficiency.
Download Datasheet | Product Details
RF Variable Attenuator
Manually Controlled Benchtop Attenuator from DC to 4 GHz

RF Variable Attenuator  from JFW Industries

The 50BR-160 from JFW Industries is a Variable Attenuator that operates from DC to 4 GHz. It has an attenuation range from 0 to 121 dB with a step size of 1 dB and has an accuracy of ± 0.6 dB. The attenuator has an insertion loss of less than 2.7 dB and can handle up to 1 watt of average input power. It can be controlled manually by rotating a knob to set the attenuation level.
Download Datasheet | Product Details
GPS/GNSS Antenna
Automotive-Grade GNSS Active Antenna for GIS and RTK Applications

GPS/GNSS Antenna  from Maxtena

The M9708CWT from Maxtena is an Active Multi-frequency GNSS Antenna that covers L1/L2/L5 GPS, Galileo, Beidou, and GLONASS bands. This right-hand circular polarized (RHCP) antenna delivers a gain of 3.3 dB and has an efficiency of up to 40%. It has an axial ratio of up to 3 dB at Zenith and a beamwidth of 117 degrees.
Download Datasheet | Product Details
Antenna
Under-Dashboard Antennas for Cellular, Wi-Fi & GNSS Antennas

Antenna  from Laird Connectivity

The Trigger Family from Laird Connectivity are 4 and 5-Port Under-Dash Antennas that operate from 698 to 5900 MHz. This innovative antenna format is designed to be installed underneath vehicle dashboards and offers significant performance improvements over candy bar-style antennas. These linear/RHCP polarized antennas provide a peak gain of 5 dBi (cellular and Wi-Fi) or 32 dBiC (GNSS).
Download Datasheet | Product Details
RF Spectrum Analyzer
Real-Time Spectrum Analyzer from 100 kHz to 43.5 GHz

RF Spectrum Analyzer  from Signal Hound

The SM435B from Signal Hound is a real-time spectrum analyzer and monitoring receiver that operates from 100 kHz to 43.5 GHz. It has 160 MHz of instantaneous bandwidth, a dynamic range of 110 dB, 1 THz/sec sweep speed at 30 kHz RWB (using Nutwall windowing), and ultra low phase noise. The low levels of phase noise rival some of the more expensive spectrum analyzers on the market.
Download Datasheet | Product Details
Tunable Filter
Miniaturized High-Power 7-Channel Filter from 225 to 512 MHz

Tunable Filter  from Menlo Micro

The MM6005 from Menlo Micro is a Miniaturized 7-Channel Reconfigurable UHF Filter based on their breakthrough Ideal Switch™ technology that provides a seven-channel discrete tuning range from 225-512 MHz. This high-power filter can handle up to 60 W of input power and has an insertion loss of 1.5 dB at 512 MHz. It is available in a module that measures 86.4 x 40.6 mm with SMA-female connectors.
Download Datasheet | Product Details
RFID Tag
Chirp Spread Spectrum-based RTLS Tag with 1 m Accuracy

RFID Tag  from nanotron Technologies

The Inpixon Asset Tag from Nanotron is a Chirp Spread Spectrum-based Real-time Location System (RTLS) Tag that enables accurate and real-time location tracking of high-value assets. It delivers real-time distance, activity, sensor, and location tracking for digital visibility of assets. It is based on chirp-enabled RF technology and can track locations up to 300 m away with 1 m accuracy.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, upcoming events, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]