|
New products this week. View it in your browser
|
Sponsored by Component Search Engine |
|
|
| |
| Latest RF & MW Products this Week |
|
|
|
|
|
|
| Wi-Fi HaLow (IEEE 802.11ah) SoC for IoT Applications |
Wireless SoC
from Morse Micro
|
| The MM6108 from Morse Micro is a Wi-Fi HaLow (IEEE 802.11ah) SoC for IoT Applications. This SoC augments Wi-Fi by operating in a spectrum below 1 GHz to offer longer range and lower power connectivity. Wi-Fi HaLow meets the unique requirements for the Internet of Things (IoT) to enable a variety of use cases in industrial, agricultural, smart building, and smart city environments. |
|
Product Details
|
|
|
|
|
| 2.4 GHz Front-End Module for Wi-Fi 6 Applications |
Front End Module
from Qorvo
|
| The QPF4288A from Qorvo is a Wi-Fi 6 Front-End Module (FEM) that operates from 2412 to 2484 MHz. It integrates a 2.4 GHz power amplifier (PA), regulator, SPDT switch, bypassable low noise amplifier (LNA) and coupler into a single device. The module includes die level filtering for 2nd and 3rd harmonics as well as 5 GHz rejection for DBDC operation and feedback is provided by an RF power detector with an RF output from a directional coupler. |
|
Download Datasheet |
Product Details
|
|
|
|
|
Sponsored by Component Search Engine |
|
|
| |
|
| 2 kW Modular Amplifier System from 700 to 2700 MHz |
RF Amplifier
from SUNGSAN
|
| The SA1039 from Sungsan is a Broadband Amplifier System that operates from 700 - 1000 MHz, 1800 -2400 MHz, and 2500 -2700 MHz. It delivers a CW output power of more than 2000 W with a gain of 64 dB. The amplifier system has spurious levels of -70 dBc and harmonics of -25 dBc. The load to this amplifier system can be a radiating antenna for generating an electric field, a coil for generating a magnetic field, a current transformer for applying an RF current, and a tool for generating light or thermal energy. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| 0.5 W Power Amplifier from 10 MHz to 30 GHz |
RF Amplifier
from Mini Circuits
|
| The ZVA-0.5W303G+ from Mini Circuits is a Power Amplifier that operates from 10 MHz to 30 GHz. It delivers a saturated output power of 0.5 W with a gain of more than 20 dB and has a noise figure of less than 7.5 dB. The amplifier includes safety features such as protection against DC transients, over-voltage and reverse voltage conditions to provide reliability for demanding operating conditions. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| 3 kW GaN Solid-State Microwave Generator from 900 to 930 MHz |
Microwave Generator
from RFHIC
|
| The RIU093K0-40TG from RFHIC is a Solid-State Microwave Generator that operates from 900 to 930 MHz. It delivers an output power of up to 3 kW, has a frequency resolution of 100 kHz, and has a system efficiency of 60%. It is designed for ISM (Industrial, Scientific, Medical) applications such as plasma generation, building block for high-power systems, industrial heating & drying, microwave CVD, sintering & chemistry, biological studies, material processing, and food sterilization/pasteurization. |
|
Download Datasheet |
Product Details
|
|
|
|
|
Sponsored by Component Search Engine |
|
|
| |
|
| RF Limiting Amplifier from 2 to 18 GHz |
RF Amplifier
from AmpliTech
|
| The APT55-02001800-5011-D66-LM from AmpliTech is an RF Limiting Amplifier that operates from 2 to 18 GHz. It provides a saturated output power of 13 dBm from an input power of -40 to 10 dBm. The amplifier has a noise figure of less than 5 dB and a VSWR of 2.5:1. It requires a DC supply of 15 V and consumes 350 mA of current. It is available in a module with coaxial connectors. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| Low Noise Amplifier MMIC from 2 to 18 GHz |
RF Amplifier
from ENGIN-IC
|
| The ENGLA00182A from ENGIN-IC is a Low Noise Amplifier that operates from 2 to 18 GHz. It provides a gain of 17.5 dB with a noise figure of less than 3 dB and has an output P1dB of 12 dBm. The amplifier is impedance matched to 50 ohms and includes on-board bias circuitry. This MMIC amplifier has multiple operating bias conditions for low DC power or low noise factor. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| 4-Way Power Divider from 2 to 18 GHz |
Power Divider
from VidaRF
|
| The VPD-20180A4 from VidaRF is a 4-way Power Divider that operates from 2 to 18 GHz. This power divider can handle up to 30 Watts of power, has an insertion loss of less than 1.8 dB and an isolation of over 17 dB. It has a low amplitude balance of 0.5 dB and phase balance of 12 degrees. Sealed and painted to meet IP65 standards, this power divider is available in a module with SMA-Female connectors. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| Omni-Directional Wi-Fi 6E MIMO Antennas for Railway Carriages |
Antenna
from Huber+Suhner
|
| The SENCITY® Omni-SR Slim Series from Huber+Suhner are 3x3 and 6x6 MIMO Antennas that have been developed for use in railway carriages. The antennas cover the 2.4 GHz and 6 GHz Wi-Fi bands including support for Wi-Fi 6E. These omni-directional antennas provide excellent coverage in enclosed spaces like railway carriages. The antennas are certified for operation both in the US (NFPA-130) and Europe (EN45545). They have a compact form-factor and can be mounted on the wall or ceiling. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| 30 W Reflective SP4T Switch from 1 MHz to 2.7 GHz |
RF Switch
from Tagore Technology
|
| The TS7441L from Tagore Technology is a Symmetrical Reflective SP4T Switch that operates from 1 MHz to 2.7 GHz. The switch can handle up to 45 dBm (~30 W) of input power and has an insertion loss of less than 1.1 dB. It has a switching speed of 2 µs and provides isolation of up to 43 dB. It is suitable for use in private mobile radio handsets, public safety handsets, cellular infrastructure, small cell, LTE relays, microcells, and satellite terminal applications. |
|
Download Datasheet |
Product Details
|
|
|
|
| | About everything RF | | everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles, interviews and much more. |
|
| To unsubscribe please click here | [Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip] |
|
