1. everything RF
  2. RF Newsletters
more
PREV 28 July, 2021 NEXT

New RF and Microwave Products this Week

28 July, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 28 July, 2021
 
Sponsored by PCB Directory
 
 
 
New RF and Microwave Products this Week
Beamforming IC
CMOS Beamformer IC from 24 to 29.5 GHz for 5G Wireless Infrastructure

Beamforming IC  from Analog Devices

The ADMV4828 from Analog Devices is a CMOS Dual Polarization Beamformer IC that operates from 24 to 29.5 GHz covering the n257, n258 and n261 5G-NR bands. It has 16 configurable Tx and Rx channels with 8 horizontal and 8 vertical (dual polarization) channels. This CMOS IC has integrated Tx power detectors and a temperature sensor.
Download Datasheet | Product Details
RF Transceiver
60 GHz mm-Wave Transceiver for Short-Range Wireless Data Links

RF Transceiver  from STMicroelectronics

The ST60A2G0 from STMicroelectronics is an mm-Wave Transceiver that operates in the 60 GHz V-Band. The transceiver supports a data rate of up to 6.25 Gbits/s and operates in half-duplex mode. It can be used to power high data-rate wireless links enabling freedom from physical cables and connectors for short-range (a few cm) point-to-point communications, using a variety of external antennas.
Download Datasheet | Product Details
Band Stop Filter
Band Reject Filters with 800 MHz Bandwidth and Center Frequency from 1500 to 1550 MHz

Band Stop Filter  from Wainwright Instruments

The WRLHKX9+10-xxSS from Wainwright Instruments are Band Reject Filters with a stopband bandwidth of 800 MHz and a customizable center frequency (Fo) between 1500 and 1550 MHz. It has passbands from DC to (Fo – 550) MHz and from (Fo + 550) MHz to 11000 MHz. The filter can handle an input power of up to 5 W.
Download Datasheet | Product Details
RF Amplifier
10 W Tx/Rx Power Amplifier Module from 3.3 to 3.8 GHz for 5G-NR TDD

RF Amplifier  from Inspower

The ILA1045 from Inspower is a 5G NR TDD Tx/Rx Power Amplifier Module that operates from 3.3 to 3.8 GHz. The amplifier is based on a Doherty design using LDMOS power devices and an RF pre-distortion linearization technique to provide high efficiency linear performance. In the Tx path, the amplifier delivers an output power of 10 W with a gain of over 40 dB and in the Rx path, it delivers a gain of 10 dB and a noise figure of 3 dB.
Download Datasheet | Product Details
RF Variable Attenuator
64 Channel USB/Ethernet Controlled Attenuator from 50 to 8000 MHz

RF Variable Attenuator  from Adaura Technologies

The AD-64AR38G95 from AdauraTech is a Rackmount Programmable RF Attenuator that operates from 50 to 8000 MHz. It has 64 individually controlled RF chains and provides an attenuation range from 0 to 95 dB in 0.25 dB steps for each channel with an attenuation transition time of 425 ns. The attenuator can be controlled via USB, Ethernet or a manual keypad on the front of the device.
Download Datasheet | Product Details
RF & Microwave Circulator
Surface Mount Circulators from 200 MHz to 15 GHz

RF & Microwave Circulator  from UIY Inc.

The UIYSC Series from UIY Inc are Surface Mount Circulators that operates from 200 MHz to 15 GHz. They have an insertion loss of less than 0.5 dB and provide 20-25 dB of isolation. These circulators can handle forward/reverse power from 15 to 200 W and have a VSWR of less than 1.25:1. They are available in surface mount modules and are suitable for defense, space, and commercial applications.
Download Datasheet | Product Details
Featured Article
Skyworks
Essential Design Elements of Isolators and Circulators for Unique Military Requirements
Isolators and circulators have long been used for both military and commercial applications whenever RF signal needs to be directed down a circuit path and blocked from another circuit path. Read this article from Skyworks to learn about the design elements of Isolators and Circulators for Unique Military Requirements. Read more.
 
RF Amplifier
6 W Power Amplifier Module from 1.7 to 13 GHz

RF Amplifier  from Becker Nachrichtentechnik GmbH

The AMP17001300038L from Becker Nachrichtentechnik is a Power Amplifier Module (PAM) that operates from 1.7 to 13 GHz. It delivers a saturated output power of 6.3 W (38 dBm) with a gain of 38 dB and has a noise figure of 3 dB. The amplifier requires a DC supply voltage of 32 V and consumes up to 2 A of current.
Download Datasheet | Product Details
RF Variable Attenuator
8-Bit Digital Attenuator from 960 to 1215 MHz

RF Variable Attenuator  from Technical Services Laboratory Inc.

The 1910-960-1215 from Technical Services Laboratory is an 8-Bit Digital Attenuator that operates from 960 to 1215 MHz. It has been developed for secondary surveillance radar (SSR) and TACAN applications. The attenuator has an attenuation range of 24 dB with a resolution of 0.1 dB and a switching speed of 360 ns. It can handle up to 20 dB of CW input power and up to 30 dBm of peak input power.
Download Datasheet | Product Details
Frequency Synthesizer
10 MHz to 20 GHz RF Synthesizer Module

Frequency Synthesizer  from Holzworth Instrumentation

The HSM18001B from Holzworth Instrumentation is a RF synthesizer module that operates from 10 MHz to 20 GHz. This microwave CW source is architected on a non-PLL based platform. The digital-analog hybrid design provides excellent phase noise performance and spurious response, which compliment the phase coherent nature of these digital-analog hybrid signal sources.
Download Datasheet | Product Details
Vector Network Analyzer
2 / 4 Ports Vector Network Analyzers from 9 kHz to 8.5 GHz

Vector Network Analyzer  from SIGLENT

The SNA5000A Series from Siglent are 2 and 4-Port Vector Network Analyzers that operate from 9 kHz to 8.5 GHz with a frequency resolution of 1 Hz. They have a dynamic range of 125 dB and a level resolution of 0.05 dB. This series of analyzers consist of four models that support measurements such as scattering, differential, and time-domain parameters, Q-factor, and filter bandwidth and insertion loss.
Download Datasheet | Product Details
Vector Network Analyzer
1-Port USB Vector Network Analyzer from 1 MHz to 18 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The R180 from CMT is a handheld 1-Port VNA that provides lab grade performance from 1 MHz to 18 GHz. This 1-Port VNA (Cable and Antenna Analyzer) can connect directly to the DUT, as a result of which it has excellent measurement accuracy by eliminating the practical limitation of test cables. The R180 can be controlled and powered through a USB-C port or through an external 5 VDC power supply.
Download Datasheet | Product Details
RF Inductor
Mini Air Core Inductors from 10 to 150 nH

RF Inductor  from Coilcraft

The 2712SP Series from Coilcraft are Air Core Inductors with inductance values from 10 to 150 nH (tolerances as low as 2%). A tight tolerance eliminates the need for circuit tuning. They have exceptionally high Q factors (above 85) over a wide frequency range and have an SRF from 1.4 to 6.6 GHz. They are RoHS compliant, 260°C compatible and measure 6.86 × 4.45 × 3.15 mm.
Download Datasheet | Product Details
Featured Article by Litepoint
Bluetooth
Bluetooth Low Energy 5.1 - Angle of Arrival and Angle of Departure Test Considerations
Embedded in most mobile phones and countless consumer electronics devices, Bluetooth is primarily used for audio streaming and data transfer. The wireless technology is now also widely deployed for proximity sensing, which uses distance estimation derived from the receive signal strength indicator (RSSI) measurement. Click here to read the article.
 
Frequency Multiplier
4x Frequency Multiplier from 14.4 to 16.4 GHz

Frequency Multiplier  from Lotus Communication Systems

The FM4X14G16G from Lotus Communication Systems is a 4x Frequency Multiplier that converts an input frequency of 3.6 - 4.1 GHz to an output frequency from 14.4 - 16.4 GHz. It delivers an output power of 0 dBm with an SSB phase noise of -140 dBc/Hz @ 100 kHz offset. The multiplier requires a DC supply of 5.5 V and consumes less than 73 mA of current.
Download Datasheet | Product Details
RF Amplifier
1200 W Solid-State Power Amplifier from 10 kHz to 225 MHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 1200A225A AR RF/Microwave Instrumentation is a Solid-State Power Amplifier that operates from 10 kHz to 225 MHz. This self-contained, air-cooled amplifier, when used with an RF sweep generator, provides more than 1200 W of CW power with a gain of over 61.8 dB. All control functions, and status indications can be viewed/controlled remotely using the GPIB/IEEE-488 format, RS-232, fiber optics, USB, and Ethernet.
Download Datasheet | Product Details
RFID Reader Module
Low-Power RAIN RFID Reader with Programmable Output Power

RFID Reader Module  from CAEN RFID

The Lepton7 (Model R7100C) from CAEN RFID is an ultra-compact reader for low power, high performance RAIN RFID applications. It has a programmable output power from 10 to 30 dBm and can detect tags at a range of more than 5 m. The module is based on the Impinj E710 chipset that provides a fast reading speed and enables application in dense reader/tag environments.
Download Datasheet | Product Details
Microwave Generator
12 kW GaN Microwave Generator from 2.4 to 2.5 GHz

Microwave Generator  from RFHIC

The RIK2512K-40TG from RFHIC is a GaN Microwave Generator that operates from 2400 to 2500 MHz. It has an optional CW or pulsed operating mode and delivers a CW peak output power of 12 kW with an efficiency of 54%. The generator uses GaN-on-SiC HEMT transistors and has high frequency stability with PLL technology.
Download Datasheet | Product Details
RF Amplifier
28 dB Low-Noise Amplifier from 5.4 to 5.9 GHz

RF Amplifier  from AmpliTech

The APT3-05400590-1010-LS-D4-FAC from AmpliTech is a Low-Noise Amplifier that operates from 5.4 to 5.9 GHz. It provides a gain of more than 28 dB, has a noise figure of less than 1 dB, and a P1dB of over 10 dBm. An internal limiter provides protection against up to 2 W CW RF input power over the full band.
Download Datasheet | Product Details
Oscillator
Low-Power Programmable LVCMOS Oscillator from 1 to 110 MHz

Oscillator  from SiTime

The SiT8008B from SiTime is a Programmable Oscillator that operates from 1 to 110 MHz. It provides an LVCMOS/HCMOS output, has frequency stability from ±20 to ±50 ppm and an RMS phase jitter of 1.3 ps. The oscillator uses FlexEdge technology which provides configurable drive strength for slower rise/fall times to minimize EMI.
Download Datasheet | Product Details
RF Variable Attenuator
Solid State Programmable Attenuator from 200 MHz to 6 GHz

RF Variable Attenuator  from JFW Industries

The 50P-2014 from JFW Industries is a solid-state variable attenuator that operates from 200 MHz to 6000 MHz. It has an attenuation range from 0 to 95 dB of attenuation with 1 dB steps. The attenuator has SMA Connectors for the RF Input/Output and is powered/controlled via a USB port (USB Mini-B connector). It is ideal for research & development labs and other flexible test environments.
Download Datasheet | Product Details
Front End Module
X-Band Front End Module from 8.5 to 10.5 GHz for High-Temperature Radar Applications

Front End Module  from Qorvo

The QPM5811 from Qorvo is an MMIC front-end module (FEM) for X-Band radar that operates from 8.5 to 10.5 GHz. It has an integrated T/R switch, low-noise amplifier, and a power amplifier. In the Tx path, the module delivers a saturated output power of 0.5 W with a small signal gain of 30 dB and a PAE of 45%. In the Rx path, it provides a gain of 26 dB with a noise figure of 2 dB.
Download Datasheet | Product Details
Microwave Backhaul Radio Links
1 Gbps Fixed Wireless Backhaul Radio Link from 7125 to 8500 MHz

Microwave Backhaul Radio Links  from Cambium Networks

The PTP 78700 from Cambium Networks is a Fixed Wireless Backhaul Radio Link that operates from 7125 to 8500 MHz. It is software-tunable in 500 kHz increments for full support of NTIA and ETSI 7/8 GHz bands. The radio offers a data rate of up to 1 Gbps and has an integrated dual polarised flat panel antenna that provides a gain of 26 dBi.
Download Datasheet | Product Details
Directional Coupler
20 dB Low-PIM Directional Coupler from 555 to 6000 MHz

Directional Coupler  from RD Microwaves

The C1-C88-20xx from RD Microwaves is a Low PIM Directional Coupler that operates from 555 to 6000 MHz. It provides 20 dB of coupling, has an insertion loss of 0.3 dB and over 30 dB of isolation. The coupler can handle an average input power of up to 300 W and a peak input power of 1 kW. It has a PIM of -165 dBc and a VSWR of less than 1.3:1.
Download Datasheet | Product Details
Power Divider
30 W, 4-Way Power Divider from 18 to 40 GHz

Power Divider  from MECA

The 804-3-29.000 from MECA is a 4-way power divider that operates from 18 to 40 GHz. It can handle up to 30 watts of power, has an insertion loss of under 2.6 dB and isolation over 13 dB. The power divider is available in a module with 2.92mm Female connectors.
Download Datasheet | Product Details
RF Cable Assembly
SMA to Ultra-Miniature RF Connector Assembly from DC to 6 GHz

RF Cable Assembly  from Wurth Elektronik

The WR-UMRF from Wurth Elektronik is a cable assembly with an SMA Bulkhead Jack on one side and a Right Angle Ultra-Miniature RF Plug Connector on the other side. The assembly can be used for applications from DC to 6 GHz, has a low insertion loss of less than 2.4 dB and VSWR of less than 1.6:1. The connectors have insulation resistance of up to 500 MOhms and can withstand an RMS voltage of 200 V.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]