1. everything RF
  2. RF Newsletters
more
PREV 18 Aug, 2021 NEXT

New RF and Microwave Products this Week

18 Aug, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 18 Aug, 2021
 
Sponsored by Mouser
 
 
 
New RF and Microwave Products this Week
RF Spectrum Analyzer
Weatherproof RF Receiver from 9 kHz to 8 GHz for Spectrum Monitoring

RF Spectrum Analyzer  from CRFS

The RFeye Node 40-8 from CRFS is a purpose-built RF receiver for spectrum regulators that combines high-performance spectrum monitoring with a rugged form factor at an affordable price. It provides real-time spectrum operations and is low in Size, Weight, and Power (SWaP) making it easy to deploy where it is needed. The receiver has an operating frequency from 9 kHz to 8 GHz and a sampling rate of 62.5 MS/s I&Q.
Download Datasheet | Product Details
RF Spectrum Analyzer
Real-Time Spectrum Analyzer from 9 kHz to 27 GHz

RF Spectrum Analyzer  from ThinkRF

The R5550 from thinkRF is a Real-Time Spectrum Analyzer that is built on innovative and highly optimizable software-defined radio technologies to provide more flexibility, greater coverage, and increased functionality. Standard GigE interface and streaming rates of 360 Mbit/s make the thinkRF Real-Time Spectrum Analyzer ideal for dispersed and continuous monitoring in any location.
Download Datasheet | Product Details
RF Cable Assembly
40 GHz Low Outgassing Cable Assemblies for TVAC Test Chambers

RF Cable Assembly  from Maury Microwave

The Stability TVAC Microwave/RF Cable Assemblies from Maury Microwave have an operating frequency of up to 40 GHz and are designed for Thermal Vacuum (TVAC) test chambers. They use low outgassing materials and are thermally conditioned, going through aging and stabilization, to relieve mechanical stresses for reliable performance over temperature.
Download Datasheet | Product Details
RF Variable Attenuator
16 Channel Rackmount Programmable Attenuator from 50 to 8000 MHz

RF Variable Attenuator  from Adaura Technologies

The AD-USB16AR38G95 from Adaura Technologies is a Programmable RF Attenuator that operates from 50 to 8000 MHz. It consists of 16 individually controlled RF chains that provide an attenuation range from 0 to 95 dB in 0.25 dB steps. Each attenuator chain can handle up to 33 dBm of power, has an insertion loss of less than 12 dB and a VSWR of under 2:1.
Download Datasheet | Product Details
RF Amplifier
500 W Rack-Mount Solid-State Power Amplifier from 2 to 8 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP2085E-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 2 to 8 GHz. It provides a CW/Pulsed output power of 500 W with a gain of more than 56 dB (gain adjustment range of 20 dB). This class A/AB amplifier is equipped with inbuilt protection circuit along with extensive monitoring and offers input protection up to 10 dBm. It is an ideal TWT replacement amplifier.
Download Datasheet | Product Details
RF Amplifier
2 KW Multimode GaN Amplifier from 1 to 2.5 GHz

RF Amplifier  from Empower RF

The 2180 from Empower RF Systems is a Solid-State Power Amplifier that operates from 1000 to 2500 MHz. It delivers a CW output power of more than 2000 W and a gain of 63 dB (gain adjustment range 20 dB). The amplifier utilizes high-power GaN devices that provide a wide frequency response, high gain, high peak power capability, and low distortions.
Download Datasheet | Product Details
RF Amplifier
150 W Solid-State Power Amplifier from 10 kHz to 1000 MHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 150U1000 from AR RF/Microwave Instrumentation is a Solid-State Power Amplifier that operates from 10 kHz to1000 MHz. This self-contained, air-cooled amplifier, when used with an RF sweep generator, provides more than 150 W of CW power with a gain of over 52 dB. It is protected from RF input overdrive by an input leveling circuit which controls the RF input level to the amplifier first stage when the input level is increased above 0 dBm.
Download Datasheet | Product Details
Sponsored by Mouser
BGM220
Develop energy-friendly connected IoT applications
Silicon Labs BGM220 Explorer Kit is designed for IoT devices using the BGM220P Wireless Gecko BLUETOOTH® Module. The BGM220P Module is based on the EFR32BG22 SoC and includes a mikroBUS™ socket and Qwiic® connector. Click here to learn more.
 
Multicoupler
8 / 16 Ports Rackmount Multi-couplers from 2 to 32 MHz

Multicoupler  from Technical Services Laboratory Inc.

The Reico HF High-Performance Multicouplers from TSL operate from 2 to 32 MHz. They use 8-output active power dividers optimized for a wide dynamic range and high isolation. The multi-couplers have a 1:8 or 1:16 configuration, with optional gain and phase tracking. They are available in 1.75" rack-mount modules with N/BNC/TNC connectors.
Download Datasheet | Product Details
RF Connector
Micro-coaxial RF Cable Assembly from DC to 9 GHz

RF Connector  from I-PEX

The MHF I Series from I-PEX are Micro-Coaxial RF Cable Assemblies that operate from DC to 9 GHz. They have a VSWR of less than 1.9 and a characteristic impedance of 50 Ohm. These cable assemblies feature solderless micro-coaxial terminations based on i-Fit technology. The assemblies are available in multiple options that measure 3.1 x 3.0 x 3.0 mm with 1.80/1.37/1.32/1.13/0.81 mm cables and Au/Ni plug or receptacle type connectors.
Download Datasheet | Product Details
RF Cable Assembly
12.4 GHz Coaxial Cable Assemblies with Multiple Connector Options

RF Cable Assembly  from NAI Group

The STEADY LINK™ Series-C LMR from NAI Group are Coaxial Cable Assemblies that operate from DC to 12.4 GHz. They have been designed to provide durable and reliable short run feeder connections to WISP, SCADA, GPS, and mobile transmission antennas. The assemblies can handle a peak power of up to 5.6 kW and have a propagation velocity of 84%.
Download Datasheet | Product Details
Software
3D Wireless Prediction Software

Software  from Remcom

Wireless InSite® is a suite of ray-tracing models and high-fidelity EM solvers for the analysis of site-specific radio wave propagation and wireless communication systems. The RF propagation software provides efficient and accurate predictions of EM propagation and communication channel characteristics in complex urban, indoor, rural and mixed path environments.
Download Datasheet | Product Details
RF Repeaters
28 GHz Low-Latency RF Repeater for 5G Base Stations

RF Repeaters  from Pivotal Commware

The Pivot 5G from Pivotal Commware is an RF Repeater for extending, redirecting and shaping mmWave signals from 5G base stations on demand with low latency. It operates from 27.50 to 28.35 GHz and is available as donor units with a range of more than 1000 ft, and as three types of service units. It has in-band ripples of 2 dB per 100 MHz channel and latency of less than 40 ns.
Download Datasheet | Product Details
Frequency Synthesizer
YIG Based Multi-Channel RF Signal Synthesizers from 10 MHz to 40 GHz

Frequency Synthesizer  from Holzworth Instrumentation

The HSY Series from Holzworth are YIG-based RF Signal Synthesizers that operate from 10 MHz to 3/6/12/24/40 GHz. They are available in 1, 2, 3, or 4 channel options, with each channel having an accurate dynamic range from -110 to +20 dBm. The synthesizers provide a frequency step size of 0.001 Hz, have a phase offset resolution of 0.1º, and a switching speed of less than 10 ms.
Download Datasheet | Product Details
RF Switch
DP4T Routing Switch for Cellular and Automotive Applications up to 6 GHz

RF Switch  from Qorvo

The QPC1220Q from Qorvo is a High Linearity DP4T Routing Switch that operates from 617 to 6000 MHz for multiple air interfaces including 5G. It has an insertion loss of less than 0.95 dB and provides an isolation of over 22 dB. The routing switch integrates a serial control system compatible with the RFFE 2.1 control interface. It requires a single voltage supply and has very low current consumption.
Download Datasheet | Product Details
Sponsored by Mouser
 
 
 
RF Amplifier
100 W High Gain Power Amplifier from 700 to 2700 MHz

RF Amplifier  from AmpliTech

The AMTHPA-00700270-100W from AmpliTech is a High Gain Power Amplifier that operates from 0.7 to 2.7 GHz. It provides a saturated output power of 100 Watts and a small signal gain of over 50 dB with 1.0 dB Gain flatness. The amplifier requires a 32V DC power supply and has a 30% PAE. The AMTHPA-00700270-100W is available in a module that measures 10.8 x 7.4 x 4.4 inches with SMA female connectors.
Download Datasheet | Product Details
RF Variable Attenuator
64 dB Digitally Controlled Attenuator from 0.5 to 2 GHz

RF Variable Attenuator  from G.T. Microwave, Inc.

The A6P-39A-4CF from GT Microwave is a Digitally Controlled PIN Diode Attenuator that operates from 0.5 to 2 GHz. It provides an attenuation of up to 64 dB (±3.5 dB flatness) in 0.25 dB steps and has an insertion loss of 2.4 dB. The attenuator is digitally controlled via 8-bit TTL compatible binary logic and has a switching speed of 7 µs. It can handle up to +20 dBm CW or 1 W of input power and has a VSWR of less than 1.75:1.
Download Datasheet | Product Details
RF Amplifier
Low Noise Amplifier for Military and Industrial Applications

RF Amplifier  from Planar Monolithics Industries

The PE2-30-6R018R0-3R5-22-12-SFF from Planar Monolithics Industries is a Low Noise Amplifier that operates from 6 to 18 GHz. The amplifier provides a gain of 30 dB with a noise figure of 3.5 dB and has a P1 dB of over 18.5 dBm. It requires a DC supply of 12-15 V and consumes less than 325 mA of current. It is ideal for military and industrial applications.
Download Datasheet | Product Details
RF Amplifier
Cascadable Gain Equalizing Amplifier from 2 to 18 GHz

RF Amplifier  from Atlanta Micro

The AM1110 from Atlanta Micro is a Gain Equalizing Amplifier that operates from 2 to 18 GHz. It has a gain of 5 dB @ 2 GHz and 14 dB @ 18 GHz. This ascending gain at higher frequencies negates the need for an extra equalizer in devices and thus saves space & BOM costs. The amplifier has an output P1dB of 17 dBm, a gain slope of 9 dB, and a noise figure of less than 4.1 dB.
Download Datasheet | Product Details
RF Amplifier
40 W GaN MMIC Power Amplifier from 2 to 6 GHz

RF Amplifier  from Wolfspeed, A Cree Company

The CMPA2060035F1 from Wolfspeed is an MMIC Power Amplifier that operates from 2 to 6 GHz. It delivers 40 W of output power with more than 22 dB of power gain and power-added efficiency (PAE) of up to 52%. The amplifier is based on a two-stage GaN HEMT design which enables a wide bandwidth. GaN HEMT technology provides a higher breakdown voltage, higher saturated electron drift velocity, and higher thermal conductivity compared to silicon and GaAs.
Download Datasheet | Product Details
RF Amplifier
Ultra-Low Noise Amplifier from 50 to 500 MHz

RF Amplifier  from Lotus Communication Systems

The LNA50M500M from Lotus Communication Systems is an Ultra-Low Noise Amplifier that operates from 50 to 500 MHz. It provides a gain of 23 dB with a noise figure of less than 1.2 dB and has an output P1dB of over 20 dBm. This highly linear LNA requires a DC supply of 5 V and consumes less than 100 mA of current. It is available in a shielded RF enclosure that measures 16.00 x 16.00 x 0.59 inches.
Download Datasheet | Product Details
Cellular Module
600 Mbps LTE-A (Cat 12) Module with Support for eCall

Cellular Module  from Quectel

The LTE-A EM121R-GL from Quectel is a 4G LTE-A (Cat 12) Module that is designed according to the 3GPP Release 14 specification. It delivers a downlink data rate of up to 600 Mbps and an uplink data rate of up to 150 Mbps. This module supports 2x2 and 4x2 downlink MIMO and emergency service features like eCall. It supports DL 3 carrier aggregation and 256QAM.
Download Datasheet | Product Details
Power Divider
Rugged 2-Way Passive GPS Wilkinson Splitter from 1.1 to 1.7 GHz

Power Divider  from GPS Networking

The MIL-LDCBS1X2 from GPS Networking is a 2-Way Passive GPS Wilkinson Splitter that operates from 1.1 to 1.7 GHz. It has an insertion loss of less than 5 dB and provides over 20 dB of isolation. The splitter has an amplitude balance of less than 1 dB and a phase balance of under 1 degree. The frequency response of this splitter covers the entire L-band (all GNSS frequencies) with excellent gain flatness.
Download Datasheet | Product Details
Microwave Backhaul Radio Links
IP67-Rated Cost-Effective Point-to-Point Radio for Outdoor Applications

Microwave Backhaul Radio Links  from Intracom Telecom

The OmniBAS™-OSDR from Intracom Telecom is a cost-effective, high-capacity Point-to-Point Radio for outdoor applications. It operates at 10.15 – 10.65, 12.75 – 13.25, 14.4 – 15.35, 17.7 – 19.7, 21.2 – 23.6, 24.5 – 26.5, 27.5 – 29.5, 31.8 – 33.4 and 37.0 – 39.5 GHz. The radio is based on the Outdoor Software-Defined Radio (OSDR) platform from Intracom Telecom.
Download Datasheet | Product Details
Base Station Antenna
Multi-Beam Base Station Antenna for LTE Deployments

Base Station Antenna  from MatSing

The MS-MBA-3.2-H8-L4 from MatSing is a Multi-beam Base Station Antenna that operates at 698-960 MHz (LF) and 1695-2690 MHz (HF). It is based on a patented Lens Technology that utilizes a spherical lens design to provide two isolated LF cross-polarized beams and three isolated HF cross-polarized beams. The antenna provides a gain of 14.2 dBi for the LF beams and 17.8 dBi for the HF beams.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]